[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 7/8] hw/arm/virt: Add QEMU powerdown notifier
From: |
Wei Huang |
Subject: |
Re: [Qemu-devel] [PATCH v2 7/8] hw/arm/virt: Add QEMU powerdown notifier and hook it to GPIO Pin 3 |
Date: |
Wed, 11 Nov 2015 00:57:12 -0600 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.1.0 |
On 10/29/2015 09:27 AM, Shannon Zhao wrote:
> Currently mach-virt model doesn't support powerdown request. Guest VM
> doesn't react to system_powerdown from monitor console (or QMP) because
> there is no communication mechanism for such requests. This patch registers
> GPIO Pin 3 with powerdown notification. So guest VM can receive notification
> when such powerdown request is triggered.
>
> Signed-off-by: Wei Huang <address@hidden>
> Signed-off-by: Shannon Zhao <address@hidden>
> Signed-off-by: Shannon Zhao <address@hidden>
> ---
> hw/arm/virt.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index 5c505a4..6f1b9d6 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -540,6 +540,18 @@ static void create_rtc(const VirtBoardInfo *vbi,
> qemu_irq *pic)
> g_free(nodename);
> }
>
> +static DeviceState *pl061_dev;
> +static void virt_powerdown_req(Notifier *n, void *opaque)
> +{
> + /* use gpio Pin 3 for power button event */
> + qemu_set_irq(qdev_get_gpio_in(pl061_dev, 3), 0);
> + qemu_set_irq(qdev_get_gpio_in(pl061_dev, 3), 1);
This pull-down and then pull-up is for extra safety, right? It actually
also works with only pull-up call. But I am OK with your design here;
please add additional comments to explain the design.
> +}
> +
> +static Notifier virt_system_powerdown_notifier = {
> + .notify = virt_powerdown_req
> +};
> +
> static void create_gpio(const VirtBoardInfo *vbi, qemu_irq *pic)
> {
> char *nodename;
> @@ -548,7 +560,7 @@ static void create_gpio(const VirtBoardInfo *vbi,
> qemu_irq *pic)
> int irq = vbi->irqmap[VIRT_GPIO];
> const char compat[] = "arm,pl061\0arm,primecell";
>
> - sysbus_create_simple("pl061", base, pic[irq]);
> + pl061_dev = sysbus_create_simple("pl061", base, pic[irq]);
>
> nodename = g_strdup_printf("/address@hidden" PRIx64, base);
> qemu_fdt_add_subnode(vbi->fdt, nodename);
> @@ -563,6 +575,9 @@ static void create_gpio(const VirtBoardInfo *vbi,
> qemu_irq *pic)
> qemu_fdt_setprop_cell(vbi->fdt, nodename, "clocks", vbi->clock_phandle);
> qemu_fdt_setprop_string(vbi->fdt, nodename, "clock-names", "apb_pclk");
>
> + /* connect powerdown request */
> + qemu_register_powerdown_notifier(&virt_system_powerdown_notifier);
> +
> g_free(nodename);
> }
>
>
Reviewed-by: Wei Huang <address@hidden>
- Re: [Qemu-devel] [PATCH v2 7/8] hw/arm/virt: Add QEMU powerdown notifier and hook it to GPIO Pin 3,
Wei Huang <=