qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v2] i.MX: add support for lower and upper interrupt


From: Jean-Christophe Dubois
Subject: [Qemu-devel] [PATCH v2] i.MX: add support for lower and upper interrupt in GPIO.
Date: Sat, 14 Nov 2015 11:41:08 +0100

The i.MX6 GPIO device supports 2 interrupts instead of one.

* 1 for the lower 16 GPIOs.
* 1 for the upper 16 GPIOs.

i.MX31 and i.MX25 only support 1 interrupt for the 32 GPIOs.

So we add a property to turn the behavior on when required.

Signed-off-by: Jean-Christophe Dubois <address@hidden>
Reviewed-by: Peter Crosthwaite <address@hidden>
---

Changes since v1:
 * None.

 hw/gpio/imx_gpio.c         | 12 ++++++++++--
 include/hw/gpio/imx_gpio.h |  3 ++-
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/hw/gpio/imx_gpio.c b/hw/gpio/imx_gpio.c
index 3170585..a6d7cab 100644
--- a/hw/gpio/imx_gpio.c
+++ b/hw/gpio/imx_gpio.c
@@ -62,7 +62,12 @@ static const char *imx_gpio_reg_name(uint32_t reg)
 
 static void imx_gpio_update_int(IMXGPIOState *s)
 {
-    qemu_set_irq(s->irq, (s->isr & s->imr) ? 1 : 0);
+    if (s->has_upper_pin_irq) {
+        qemu_set_irq(s->irq[0], (s->isr & s->imr & 0x0000FFFF) ? 1 : 0);
+        qemu_set_irq(s->irq[1], (s->isr & s->imr & 0xFFFF0000) ? 1 : 0);
+    } else {
+        qemu_set_irq(s->irq[0], (s->isr & s->imr) ? 1 : 0);
+    }
 }
 
 static void imx_gpio_set_int_line(IMXGPIOState *s, int line, IMXGPIOLevel 
level)
@@ -282,6 +287,8 @@ static const VMStateDescription vmstate_imx_gpio = {
 
 static Property imx_gpio_properties[] = {
     DEFINE_PROP_BOOL("has-edge-sel", IMXGPIOState, has_edge_sel, true),
+    DEFINE_PROP_BOOL("has-upper-pin-irq", IMXGPIOState, has_upper_pin_irq,
+                     false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -311,7 +318,8 @@ static void imx_gpio_realize(DeviceState *dev, Error **errp)
     qdev_init_gpio_in(DEVICE(s), imx_gpio_set, IMX_GPIO_PIN_COUNT);
     qdev_init_gpio_out(DEVICE(s), s->output, IMX_GPIO_PIN_COUNT);
 
-    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[0]);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[1]);
     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
 }
 
diff --git a/include/hw/gpio/imx_gpio.h b/include/hw/gpio/imx_gpio.h
index 517b261..b15a09f 100644
--- a/include/hw/gpio/imx_gpio.h
+++ b/include/hw/gpio/imx_gpio.h
@@ -54,8 +54,9 @@ typedef struct IMXGPIOState {
     uint32_t isr;
     bool has_edge_sel;
     uint32_t edge_sel;
+    bool has_upper_pin_irq;
 
-    qemu_irq irq;
+    qemu_irq irq[2];
     qemu_irq output[IMX_GPIO_PIN_COUNT];
 } IMXGPIOState;
 
-- 
2.5.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]