[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH COLO-Frame v11 18/39] COLO: Flush PVM's cached RAM i
From: |
zhanghailiang |
Subject: |
[Qemu-devel] [PATCH COLO-Frame v11 18/39] COLO: Flush PVM's cached RAM into SVM's memory |
Date: |
Tue, 24 Nov 2015 17:25:28 +0800 |
During the time of VM's running, PVM may dirty some pages, we will transfer
PVM's dirty pages to SVM and store them into SVM's RAM cache at next checkpoint
time. So, the content of SVM's RAM cache will always be some with PVM's memory
after checkpoint.
Instead of flushing all content of PVM's RAM cache into SVM's MEMORY,
we do this in a more efficient way:
Only flush any page that dirtied by PVM since last checkpoint.
In this way, we can ensure SVM's memory same with PVM's.
Besides, we must ensure flush RAM cache before load device state.
Signed-off-by: zhanghailiang <address@hidden>
Signed-off-by: Li Zhijian <address@hidden>
Signed-off-by: Gonglei <address@hidden>
---
v11:
- Move the place of 'need_flush' (Dave's suggestion)
- Remove unused 'DPRINTF("Flush ram_cache\n")'
v10:
- trace the number of dirty pages that be received.
---
include/migration/migration.h | 1 +
migration/colo.c | 2 --
migration/ram.c | 37 +++++++++++++++++++++++++++++++++++++
trace-events | 1 +
4 files changed, 39 insertions(+), 2 deletions(-)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index e41372d..221176b 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -336,4 +336,5 @@ PostcopyState postcopy_state_set(PostcopyState new_state);
/* ram cache */
int colo_init_ram_cache(void);
void colo_release_ram_cache(void);
+void colo_flush_ram_cache(void);
#endif
diff --git a/migration/colo.c b/migration/colo.c
index 5ac8ff2..4095d97 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -385,8 +385,6 @@ void *colo_process_incoming_thread(void *opaque)
}
qemu_mutex_unlock_iothread();
- /* TODO: flush vm state */
-
ret = colo_ctl_put(mis->to_src_file, COLO_COMMAND_VMSTATE_LOADED, 0);
if (ret < 0) {
goto out;
diff --git a/migration/ram.c b/migration/ram.c
index da6bbd6..4f37144 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2448,6 +2448,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
* be atomic
*/
bool postcopy_running = postcopy_state_get() >=
POSTCOPY_INCOMING_LISTENING;
+ bool need_flush = false;
seq_iter++;
@@ -2482,6 +2483,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
/* After going into COLO, we should load the Page into colo_cache
*/
if (ram_cache_enable) {
host = colo_cache_from_block_offset(block, addr);
+ need_flush = true;
} else {
host = host_from_ram_block_offset(block, addr);
}
@@ -2575,6 +2577,10 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
}
rcu_read_unlock();
+
+ if (!ret && ram_cache_enable && need_flush) {
+ colo_flush_ram_cache();
+ }
DPRINTF("Completed load of VM with exit code %d seq iteration "
"%" PRIu64 "\n", ret, seq_iter);
return ret;
@@ -2647,6 +2653,37 @@ void colo_release_ram_cache(void)
rcu_read_unlock();
}
+/*
+ * Flush content of RAM cache into SVM's memory.
+ * Only flush the pages that be dirtied by PVM or SVM or both.
+ */
+void colo_flush_ram_cache(void)
+{
+ RAMBlock *block = NULL;
+ void *dst_host;
+ void *src_host;
+ ram_addr_t offset = 0;
+
+ trace_colo_flush_ram_cache(migration_dirty_pages);
+ rcu_read_lock();
+ block = QLIST_FIRST_RCU(&ram_list.blocks);
+ while (block) {
+ ram_addr_t ram_addr_abs;
+ offset = migration_bitmap_find_dirty(block, offset, &ram_addr_abs);
+ migration_bitmap_clear_dirty(ram_addr_abs);
+ if (offset >= block->used_length) {
+ offset = 0;
+ block = QLIST_NEXT_RCU(block, next);
+ } else {
+ dst_host = block->host + offset;
+ src_host = block->colo_cache + offset;
+ memcpy(dst_host, src_host, TARGET_PAGE_SIZE);
+ }
+ }
+ rcu_read_unlock();
+ assert(migration_dirty_pages == 0);
+}
+
static SaveVMHandlers savevm_ram_handlers = {
.save_live_setup = ram_save_setup,
.save_live_iterate = ram_save_iterate,
diff --git a/trace-events b/trace-events
index f8a0959..f158d2a 100644
--- a/trace-events
+++ b/trace-events
@@ -1264,6 +1264,7 @@ migration_throttle(void) ""
ram_load_postcopy_loop(uint64_t addr, int flags) "@%" PRIx64 " %x"
ram_postcopy_send_discard_bitmap(void) ""
ram_save_queue_pages(const char *rbname, size_t start, size_t len) "%s: start:
%zx len: %zx"
+colo_flush_ram_cache(uint64_t dirty_pages) "dirty_pages %" PRIu64""
# hw/display/qxl.c
disable qxl_interface_set_mm_time(int qid, uint32_t mm_time) "%d %d"
--
1.8.3.1
- [Qemu-devel] [PATCH COLO-Frame v11 01/39] configure: Add parameter for configure to enable/disable COLO support, (continued)
- [Qemu-devel] [PATCH COLO-Frame v11 01/39] configure: Add parameter for configure to enable/disable COLO support, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 08/39] migration: Rename the'file' member of MigrationState, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 03/39] COLO: migrate colo related info to secondary node, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 06/39] migration: Integrate COLO checkpoint process into migration, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 13/39] COLO: Save PVM state to secondary side when do checkpoint, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 07/39] migration: Integrate COLO checkpoint process into loadvm, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 18/39] COLO: Flush PVM's cached RAM into SVM's memory,
zhanghailiang <=
- [Qemu-devel] [PATCH COLO-Frame v11 15/39] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 16/39] ram/COLO: Record the dirty pages that SVM received, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 21/39] COLO failover: Introduce a new command to trigger a failover, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 24/39] COLO: Implement failover work for Secondary VM, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 17/39] COLO: Load VMState into qsb before restore it, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 22/39] COLO failover: Introduce state to record failover process, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 27/39] COLO failover: Shutdown related socket fd when do failover, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 33/39] COLO: Split qemu_savevm_state_begin out of checkpoint process, zhanghailiang, 2015/11/24
- [Qemu-devel] [PATCH COLO-Frame v11 29/39] COLO: Process shutdown command for VM in COLO state, zhanghailiang, 2015/11/24