qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH] change type of pci_bridge_initfn() to void


From: Michael S. Tsirkin
Subject: Re: [Qemu-devel] [PATCH] change type of pci_bridge_initfn() to void
Date: Wed, 23 Dec 2015 15:38:29 +0200

On Wed, Dec 23, 2015 at 04:53:21PM +0800, Cao jin wrote:
> Hi mst
> friendly ping again...

This does not work since then this function can not be
used as an init callback, and this is how
dec uses it.

> On 12/17/2015 09:53 AM, Cao jin wrote:
> >Ping
> >
> >On 11/30/2015 05:19 PM, Michael S. Tsirkin wrote:
> >>On Mon, Nov 30, 2015 at 05:00:44PM +0800, Cao jin wrote:
> >>>It always return 0(success), change its type to void, and modify its
> >>>caller.
> >>>Doing this can reduce a error path of its caller, and it is also good
> >>>when
> >>>convert init() to realize()
> >>>
> >>>Signed-off-by: Cao jin <address@hidden>
> >>
> >>Sounds good, but pls remember to ping me after 2.5 is out.
> >>
> >>>---
> >>>  hw/pci-bridge/i82801b11.c          | 5 +----
> >>>  hw/pci-bridge/ioh3420.c            | 6 +-----
> >>>  hw/pci-bridge/pci_bridge_dev.c     | 8 +++-----
> >>>  hw/pci-bridge/xio3130_downstream.c | 6 +-----
> >>>  hw/pci-bridge/xio3130_upstream.c   | 6 +-----
> >>>  hw/pci-host/apb.c                  | 5 +----
> >>>  hw/pci/pci_bridge.c                | 3 +--
> >>>  include/hw/pci/pci_bridge.h        | 2 +-
> >>>  8 files changed, 10 insertions(+), 31 deletions(-)
> >>>
> >>>leave DEC 21154 PCI-PCI bridge unchanged because it is better to
> >>>handle it
> >>>when convert init() to realize().
> >>>
> >>>diff --git a/hw/pci-bridge/i82801b11.c b/hw/pci-bridge/i82801b11.c
> >>>index 7e79bc0..b21bc2c 100644
> >>>--- a/hw/pci-bridge/i82801b11.c
> >>>+++ b/hw/pci-bridge/i82801b11.c
> >>>@@ -61,10 +61,7 @@ static int i82801b11_bridge_initfn(PCIDevice *d)
> >>>  {
> >>>      int rc;
> >>>
> >>>-    rc = pci_bridge_initfn(d, TYPE_PCI_BUS);
> >>>-    if (rc < 0) {
> >>>-        return rc;
> >>>-    }
> >>>+    pci_bridge_initfn(d, TYPE_PCI_BUS);
> >>>
> >>>      rc = pci_bridge_ssvid_init(d, I82801ba_SSVID_OFFSET,
> >>>                                 I82801ba_SSVID_SVID,
> >>>I82801ba_SSVID_SSID);
> >>>diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c
> >>>index cce2fdd..eead195 100644
> >>>--- a/hw/pci-bridge/ioh3420.c
> >>>+++ b/hw/pci-bridge/ioh3420.c
> >>>@@ -97,11 +97,7 @@ static int ioh3420_initfn(PCIDevice *d)
> >>>      PCIESlot *s = PCIE_SLOT(d);
> >>>      int rc;
> >>>
> >>>-    rc = pci_bridge_initfn(d, TYPE_PCIE_BUS);
> >>>-    if (rc < 0) {
> >>>-        return rc;
> >>>-    }
> >>>-
> >>>+    pci_bridge_initfn(d, TYPE_PCIE_BUS);
> >>>      pcie_port_init_reg(d);
> >>>
> >>>      rc = pci_bridge_ssvid_init(d, IOH_EP_SSVID_OFFSET,
> >>>diff --git a/hw/pci-bridge/pci_bridge_dev.c
> >>>b/hw/pci-bridge/pci_bridge_dev.c
> >>>index 26aded9..bc3e1b7 100644
> >>>--- a/hw/pci-bridge/pci_bridge_dev.c
> >>>+++ b/hw/pci-bridge/pci_bridge_dev.c
> >>>@@ -52,10 +52,8 @@ static int pci_bridge_dev_initfn(PCIDevice *dev)
> >>>      PCIBridgeDev *bridge_dev = PCI_BRIDGE_DEV(dev);
> >>>      int err;
> >>>
> >>>-    err = pci_bridge_initfn(dev, TYPE_PCI_BUS);
> >>>-    if (err) {
> >>>-        goto bridge_error;
> >>>-    }
> >>>+    pci_bridge_initfn(dev, TYPE_PCI_BUS);
> >>>+
> >>>      if (bridge_dev->flags & (1 << PCI_BRIDGE_DEV_F_SHPC_REQ)) {
> >>>          dev->config[PCI_INTERRUPT_PIN] = 0x1;
> >>>          memory_region_init(&bridge_dev->bar, OBJECT(dev), "shpc-bar",
> >>>@@ -94,7 +92,7 @@ slotid_error:
> >>>      }
> >>>  shpc_error:
> >>>      pci_bridge_exitfn(dev);
> >>>-bridge_error:
> >>>+
> >>>      return err;
> >>>  }
> >>>
> >>>diff --git a/hw/pci-bridge/xio3130_downstream.c
> >>>b/hw/pci-bridge/xio3130_downstream.c
> >>>index 86b7970..012daf3 100644
> >>>--- a/hw/pci-bridge/xio3130_downstream.c
> >>>+++ b/hw/pci-bridge/xio3130_downstream.c
> >>>@@ -61,11 +61,7 @@ static int xio3130_downstream_initfn(PCIDevice *d)
> >>>      PCIESlot *s = PCIE_SLOT(d);
> >>>      int rc;
> >>>
> >>>-    rc = pci_bridge_initfn(d, TYPE_PCIE_BUS);
> >>>-    if (rc < 0) {
> >>>-        return rc;
> >>>-    }
> >>>-
> >>>+    pci_bridge_initfn(d, TYPE_PCIE_BUS);
> >>>      pcie_port_init_reg(d);
> >>>
> >>>      rc = msi_init(d, XIO3130_MSI_OFFSET, XIO3130_MSI_NR_VECTOR,
> >>>diff --git a/hw/pci-bridge/xio3130_upstream.c
> >>>b/hw/pci-bridge/xio3130_upstream.c
> >>>index eada582..434c8fd 100644
> >>>--- a/hw/pci-bridge/xio3130_upstream.c
> >>>+++ b/hw/pci-bridge/xio3130_upstream.c
> >>>@@ -56,11 +56,7 @@ static int xio3130_upstream_initfn(PCIDevice *d)
> >>>      PCIEPort *p = PCIE_PORT(d);
> >>>      int rc;
> >>>
> >>>-    rc = pci_bridge_initfn(d, TYPE_PCIE_BUS);
> >>>-    if (rc < 0) {
> >>>-        return rc;
> >>>-    }
> >>>-
> >>>+    pci_bridge_initfn(d, TYPE_PCIE_BUS);
> >>>      pcie_port_init_reg(d);
> >>>
> >>>      rc = msi_init(d, XIO3130_MSI_OFFSET, XIO3130_MSI_NR_VECTOR,
> >>>diff --git a/hw/pci-host/apb.c b/hw/pci-host/apb.c
> >>>index 599768e..e9117b9 100644
> >>>--- a/hw/pci-host/apb.c
> >>>+++ b/hw/pci-host/apb.c
> >>>@@ -636,10 +636,7 @@ static int apb_pci_bridge_initfn(PCIDevice *dev)
> >>>  {
> >>>      int rc;
> >>>
> >>>-    rc = pci_bridge_initfn(dev, TYPE_PCI_BUS);
> >>>-    if (rc < 0) {
> >>>-        return rc;
> >>>-    }
> >>>+    pci_bridge_initfn(dev, TYPE_PCI_BUS);
> >>>
> >>>      /*
> >>>       * command register:
> >>>diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
> >>>index 40c97b1..5c30795 100644
> >>>--- a/hw/pci/pci_bridge.c
> >>>+++ b/hw/pci/pci_bridge.c
> >>>@@ -332,7 +332,7 @@ void pci_bridge_reset(DeviceState *qdev)
> >>>  }
> >>>
> >>>  /* default qdev initialization function for PCI-to-PCI bridge */
> >>>-int pci_bridge_initfn(PCIDevice *dev, const char *typename)
> >>>+void pci_bridge_initfn(PCIDevice *dev, const char *typename)
> >>>  {
> >>>      PCIBus *parent = dev->bus;
> >>>      PCIBridge *br = PCI_BRIDGE(dev);
> >>>@@ -378,7 +378,6 @@ int pci_bridge_initfn(PCIDevice *dev, const char
> >>>*typename)
> >>>      br->windows = pci_bridge_region_init(br);
> >>>      QLIST_INIT(&sec_bus->child);
> >>>      QLIST_INSERT_HEAD(&parent->child, sec_bus, sibling);
> >>>-    return 0;
> >>>  }
> >>>
> >>>  /* default qdev clean up function for PCI-to-PCI bridge */
> >>>diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h
> >>>index 93b621c..ed4aff6 100644
> >>>--- a/include/hw/pci/pci_bridge.h
> >>>+++ b/include/hw/pci/pci_bridge.h
> >>>@@ -48,7 +48,7 @@ void pci_bridge_disable_base_limit(PCIDevice *dev);
> >>>  void pci_bridge_reset_reg(PCIDevice *dev);
> >>>  void pci_bridge_reset(DeviceState *qdev);
> >>>
> >>>-int pci_bridge_initfn(PCIDevice *pci_dev, const char *typename);
> >>>+void pci_bridge_initfn(PCIDevice *pci_dev, const char *typename);
> >>>  void pci_bridge_exitfn(PCIDevice *pci_dev);
> >>>
> >>>
> >>>--
> >>>2.1.0
> >>>
> >>>
> >>
> >>
> >>.
> >>
> >
> 
> -- 
> Yours Sincerely,
> 
> Cao Jin
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]