[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 16/21] qemu-iotests: s390x: fix test 051
|
From: |
Max Reitz |
|
Subject: |
[Qemu-devel] [PULL 16/21] qemu-iotests: s390x: fix test 051 |
|
Date: |
Thu, 7 Jan 2016 23:57:30 +0100 |
From: Bo Tu <address@hidden>
Replace the remaining "-drive file..."
by "-drive file=...,if=none,id=$device_id", then x86 and s390x
can get the common output.
"if=ide, if=floppy, if=scsi" are not supported by s390x,
so these test cases are not executed for s390x platform.
Signed-off-by: Bo Tu <address@hidden>
Message-id: address@hidden
Signed-off-by: Max Reitz <address@hidden>
---
tests/qemu-iotests/051 | 32 ++++++++++++--------
tests/qemu-iotests/051.out | 70 ++++++++++++++-----------------------------
tests/qemu-iotests/051.pc.out | 52 +++++++++++++++++---------------
3 files changed, 69 insertions(+), 85 deletions(-)
diff --git a/tests/qemu-iotests/051 b/tests/qemu-iotests/051
index 75713c2..d91f80b 100755
--- a/tests/qemu-iotests/051
+++ b/tests/qemu-iotests/051
@@ -65,6 +65,7 @@ function run_qemu()
}
size=128M
+device_id="drive0"
_make_test_img $size
cp "$TEST_IMG" "$TEST_IMG.orig"
@@ -75,10 +76,10 @@ echo
echo === Unknown option ===
echo
-run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=
-run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=on
-run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=1234
-run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=foo
+run_qemu -drive
file="$TEST_IMG",format=qcow2,unknown_opt=,if=none,id=$device_id
+run_qemu -drive
file="$TEST_IMG",format=qcow2,unknown_opt=on,if=none,id=$device_id
+run_qemu -drive
file="$TEST_IMG",format=qcow2,unknown_opt=1234,if=none,id=$device_id
+run_qemu -drive
file="$TEST_IMG",format=qcow2,unknown_opt=foo,if=none,id=$device_id
echo
echo === Unknown protocol option ===
@@ -108,7 +109,7 @@ echo
echo === Overriding backing file ===
echo
-echo "info block" | run_qemu -drive
file="$TEST_IMG",driver=qcow2,backing.file.filename="$TEST_IMG.orig"
-nodefaults\
+echo "info block" | run_qemu -drive
file="$TEST_IMG",driver=qcow2,backing.file.filename="$TEST_IMG.orig",if=none,id=$device_id
-nodefaults\
| _filter_generated_node_ids
# Drivers that don't support backing files
@@ -140,13 +141,19 @@ echo
echo === No medium ===
echo
-run_qemu -drive if=floppy
-run_qemu -drive if=ide,media=cdrom
-run_qemu -drive if=scsi,media=cdrom
+case "$QEMU_DEFAULT_MACHINE" in
+ pc)
+ run_qemu -drive if=floppy
+ run_qemu -drive if=ide,media=cdrom
+ run_qemu -drive if=scsi,media=cdrom
+ run_qemu -drive if=ide
+ run_qemu -drive if=scsi
+ ;;
+ *)
+ ;;
+esac
-run_qemu -drive if=ide
run_qemu -drive if=virtio
-run_qemu -drive if=scsi
case "$QEMU_DEFAULT_MACHINE" in
pc)
@@ -171,13 +178,13 @@ case "$QEMU_DEFAULT_MACHINE" in
run_qemu -drive file="$TEST_IMG",if=ide,media=cdrom,readonly=on
run_qemu -drive file="$TEST_IMG",if=scsi,media=cdrom,readonly=on
run_qemu -drive file="$TEST_IMG",if=ide,readonly=on
+ run_qemu -drive file="$TEST_IMG",if=scsi,readonly=on
;;
*)
;;
esac
run_qemu -drive file="$TEST_IMG",if=virtio,readonly=on
-run_qemu -drive file="$TEST_IMG",if=scsi,readonly=on
case "$QEMU_DEFAULT_MACHINE" in
pc)
@@ -211,7 +218,7 @@ run_qemu -drive driver=null-co,cache=invalid_value
for cache in writeback writethrough unsafe invalid_value; do
echo -e "info block\ninfo block file\ninfo block backing\ninfo block
backing-file" | \
- run_qemu -drive
file="$TEST_IMG",cache=$cache,backing.file.filename="$TEST_IMG.base",backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file
-nodefaults
+ run_qemu -drive
file="$TEST_IMG",cache=$cache,backing.file.filename="$TEST_IMG.base",backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=$device_id
-nodefaults
done
echo
@@ -277,7 +284,6 @@ echo
$QEMU_IO -c "write -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
-device_id="drive0"
echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive
file="$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io
echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive
file="$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io
diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index 143e3ea..bf886ce 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -4,17 +4,17 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
backing_file=TEST_DIR/
=== Unknown option ===
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: Block
format 'qcow2' used by device 'virtio0' doesn't support the option 'unknown_opt'
+Testing: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format
'qcow2' used by device 'drive0' doesn't support the option 'unknown_opt'
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: Block
format 'qcow2' used by device 'virtio0' doesn't support the option 'unknown_opt'
+Testing: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block
format 'qcow2' used by device 'drive0' doesn't support the option 'unknown_opt'
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: Block
format 'qcow2' used by device 'virtio0' doesn't support the option 'unknown_opt'
+Testing: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block
format 'qcow2' used by device 'drive0' doesn't support the option 'unknown_opt'
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: Block
format 'qcow2' used by device 'virtio0' doesn't support the option 'unknown_opt'
+Testing: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block
format 'qcow2' used by device 'drive0' doesn't support the option 'unknown_opt'
=== Unknown protocol option ===
@@ -56,10 +56,11 @@ QEMU X.Y.Z monitor - type 'help' for more information
=== Overriding backing file ===
-Testing: -drive
file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig
-nodefaults
+Testing: -drive
file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0
-nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo block[K
-virtio0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+ Removable device: not locked, tray closed
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1)
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
@@ -107,35 +108,10 @@ QEMU X.Y.Z monitor - type 'help' for more information
=== No medium ===
-Testing: -drive if=floppy
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) Warning: Orphaned drive without device:
id=floppy0,file=,if=floppy,bus=0,unit=0
-q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-
-Testing: -drive if=ide,media=cdrom
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) Warning: Orphaned drive without device:
id=ide0-cd0,file=,if=ide,bus=0,unit=0
-q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-
-Testing: -drive if=scsi,media=cdrom
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) Warning: Orphaned drive without device:
id=scsi0-cd0,file=,if=scsi,bus=0,unit=0
-q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-
-Testing: -drive if=ide
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) Warning: Orphaned drive without device:
id=ide0-hd0,file=,if=ide,bus=0,unit=0
-q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-
Testing: -drive if=virtio
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
-Testing: -drive if=scsi
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) Warning: Orphaned drive without device:
id=scsi0-hd0,file=,if=scsi,bus=0,unit=0
-q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-
=== Read-only ===
@@ -143,11 +119,6 @@ Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) Warning: Orphaned drive without device:
id=scsi0-hd0,file=TEST_DIR/t.qcow2,if=scsi,bus=0,unit=0
-q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-
=== Cache modes ===
@@ -174,10 +145,11 @@ QEMU X.Y.Z monitor - type 'help' for more information
Testing: -drive driver=null-co,cache=invalid_value
QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option
-Testing: -drive
file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file
-nodefaults
+Testing: -drive
file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0
-nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo block[K
-ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+ Removable device: not locked, tray closed
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo
block[K[D[D[D[D[D[D[D[D[D[Dinfo block
[K[D[D[D[D[D[D[D[D[D[D[Dinfo block
f[K[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fi[K[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fil[K[D[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block file[K
@@ -193,10 +165,11 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-Testing: -drive
file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file
-nodefaults
+Testing: -drive
file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0
-nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo block[K
-ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+ Removable device: not locked, tray closed
Cache mode: writethrough
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo
block[K[D[D[D[D[D[D[D[D[D[Dinfo block
[K[D[D[D[D[D[D[D[D[D[D[Dinfo block
f[K[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fi[K[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fil[K[D[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block file[K
@@ -212,10 +185,11 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-Testing: -drive
file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file
-nodefaults
+Testing: -drive
file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0
-nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo block[K
-ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+ Removable device: not locked, tray closed
Cache mode: writeback, ignore flushes
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo
block[K[D[D[D[D[D[D[D[D[D[Dinfo block
[K[D[D[D[D[D[D[D[D[D[D[Dinfo block
f[K[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fi[K[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fil[K[D[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block file[K
@@ -231,8 +205,8 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-Testing: -drive
file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file
-nodefaults
-QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file:
invalid cache option
+Testing: -drive
file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0
-nodefaults
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0:
invalid cache option
=== Specifying the protocol layer ===
diff --git a/tests/qemu-iotests/051.pc.out b/tests/qemu-iotests/051.pc.out
index 05c925a..a5dfc33 100644
--- a/tests/qemu-iotests/051.pc.out
+++ b/tests/qemu-iotests/051.pc.out
@@ -4,17 +4,17 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
backing_file=TEST_DIR/
=== Unknown option ===
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: Block
format 'qcow2' used by device 'ide0-hd0' doesn't support the option
'unknown_opt'
+Testing: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format
'qcow2' used by device 'drive0' doesn't support the option 'unknown_opt'
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: Block
format 'qcow2' used by device 'ide0-hd0' doesn't support the option
'unknown_opt'
+Testing: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block
format 'qcow2' used by device 'drive0' doesn't support the option 'unknown_opt'
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: Block
format 'qcow2' used by device 'ide0-hd0' doesn't support the option
'unknown_opt'
+Testing: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block
format 'qcow2' used by device 'drive0' doesn't support the option 'unknown_opt'
-Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: Block
format 'qcow2' used by device 'ide0-hd0' doesn't support the option
'unknown_opt'
+Testing: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block
format 'qcow2' used by device 'drive0' doesn't support the option 'unknown_opt'
=== Unknown protocol option ===
@@ -56,10 +56,11 @@ QEMU X.Y.Z monitor - type 'help' for more information
=== Overriding backing file ===
-Testing: -drive
file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig
-nodefaults
+Testing: -drive
file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0
-nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo block[K
-ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+ Removable device: not locked, tray closed
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1)
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
@@ -124,14 +125,14 @@ QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Device needs media, but drive is empty
QEMU_PROG: Initialization of device ide-hd failed: Device initialization
failed.
-Testing: -drive if=virtio
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
-
Testing: -drive if=scsi
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Initialization of device lsi53c895a failed: Device needs
media, but drive is empty
+Testing: -drive if=virtio
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
+
Testing: -drive if=none,id=disk -device ide-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
@@ -178,11 +179,11 @@ QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Can't use a read-only drive
QEMU_PROG: Initialization of device ide-hd failed: Device initialization
failed.
-Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
+Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
+Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
@@ -238,10 +239,11 @@ QEMU X.Y.Z monitor - type 'help' for more information
Testing: -drive driver=null-co,cache=invalid_value
QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option
-Testing: -drive
file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file
-nodefaults
+Testing: -drive
file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0
-nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo block[K
-ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+ Removable device: not locked, tray closed
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo
block[K[D[D[D[D[D[D[D[D[D[Dinfo block
[K[D[D[D[D[D[D[D[D[D[D[Dinfo block
f[K[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fi[K[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fil[K[D[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block file[K
@@ -257,10 +259,11 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-Testing: -drive
file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file
-nodefaults
+Testing: -drive
file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0
-nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo block[K
-ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+ Removable device: not locked, tray closed
Cache mode: writethrough
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo
block[K[D[D[D[D[D[D[D[D[D[Dinfo block
[K[D[D[D[D[D[D[D[D[D[D[Dinfo block
f[K[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fi[K[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fil[K[D[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block file[K
@@ -276,10 +279,11 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-Testing: -drive
file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file
-nodefaults
+Testing: -drive
file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0
-nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo block[K
-ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
+ Removable device: not locked, tray closed
Cache mode: writeback, ignore flushes
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) i[K[Din[K[D[Dinf[K[D[D[Dinfo[K[D[D[D[Dinfo
[K[D[D[D[D[Dinfo b[K[D[D[D[D[D[Dinfo
bl[K[D[D[D[D[D[D[Dinfo blo[K[D[D[D[D[D[D[D[Dinfo
bloc[K[D[D[D[D[D[D[D[D[Dinfo
block[K[D[D[D[D[D[D[D[D[D[Dinfo block
[K[D[D[D[D[D[D[D[D[D[D[Dinfo block
f[K[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fi[K[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block
fil[K[D[D[D[D[D[D[D[D[D[D[D[D[D[Dinfo block file[K
@@ -295,8 +299,8 @@ backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
-Testing: -drive
file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file
-nodefaults
-QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file:
invalid cache option
+Testing: -drive
file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0
-nodefaults
+QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0:
invalid cache option
=== Specifying the protocol layer ===
--
2.6.4
- [Qemu-devel] [PULL 10/21] iotests: 034: Use TEST_IMG override instead of "mv", (continued)
- [Qemu-devel] [PULL 10/21] iotests: 034: Use TEST_IMG override instead of "mv", Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 11/21] iotests: 037: Use TEST_IMG override instead of "mv", Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 09/21] iotests: 028: Use TEST_IMG override instead of "mv", Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 12/21] iotests: 038: Use TEST_IMG override instead of "mv", Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 13/21] iotests: 050: Use TEST_IMG override instead of "mv", Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 14/21] iotests: 095: Use TEST_IMG override instead of "mv", Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 15/21] iotests: 095: Filter _img_info output, Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 17/21] block: Rename BLOCK_OP_TYPE_MIRROR to BLOCK_OP_TYPE_MIRROR_SOURCE, Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 18/21] block: Extract blockdev part of qmp_drive_mirror, Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 19/21] block: Add check on mirror target, Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 16/21] qemu-iotests: s390x: fix test 051,
Max Reitz <=
- [Qemu-devel] [PULL 20/21] qmp: Add blockdev-mirror command, Max Reitz, 2016/01/07
- [Qemu-devel] [PULL 21/21] iotests: Add test cases for blockdev-mirror, Max Reitz, 2016/01/07
- Re: [Qemu-devel] [PULL 00/21] Block layer patches, Peter Maydell, 2016/01/08