qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH 1/6] virtio-net: use the backend cross-endian ca


From: Greg Kurz
Subject: Re: [Qemu-devel] [PATCH 1/6] virtio-net: use the backend cross-endian capabilities
Date: Fri, 8 Jan 2016 15:19:49 +0100

On Thu, 7 Jan 2016 19:32:37 +0100
Laurent Vivier <address@hidden> wrote:
> 

Sorry for the late answer to this one, I got diverted :)

> 
> On 07/01/2016 12:32, Greg Kurz wrote:
> > When running a fully emulated device in cross-endian conditions, including
> > a virtio 1.0 device offered to a big endian guest, we need to fix the vnet
> > headers. This is currently handled by the virtio_net_hdr_swap() function
> > in the core virtio-net code but it should actually be handled by the net
> > backend.
> > 
> > With this patch, virtio-net now tries to configure the backend to do the
> > endian fixing when the device starts. If the backend cannot support the
> > requested endiannes, we have to fall back on virtio_net_hdr_swap(): this
> > is recorded in the needs_vnet_hdr_swap flag, to be used in the TX and RX
> > paths.
> > 
> > The current vhost-net code also tries to configure net backends. This will
> > be no more needed and will be addressed in a subsequent patch.
> > 
> > Signed-off-by: Greg Kurz <address@hidden>
> > ---
> >  hw/net/virtio-net.c            |   33 +++++++++++++++++++++++++++++++--
> >  include/hw/virtio/virtio-net.h |    1 +
> >  2 files changed, 32 insertions(+), 2 deletions(-)
> > 
> > diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
> > index a877614e3e7a..d4cc94ea5e55 100644
> > --- a/hw/net/virtio-net.c
> > +++ b/hw/net/virtio-net.c
> > @@ -152,6 +152,31 @@ static void virtio_net_vhost_status(VirtIONet *n, 
> > uint8_t status)
> >      }
> >  }
> >  
> > +static void virtio_net_vnet_status(VirtIONet *n, uint8_t status)
> > +{
> > +    VirtIODevice *vdev = VIRTIO_DEVICE(n);
> > +    NetClientState *peer = qemu_get_queue(n->nic)->peer;
> > +
> > +    if (virtio_net_started(n, status)) {
> > +        int r;
> > +
> > +        if (virtio_is_big_endian(vdev)) {
> > +            r = qemu_set_vnet_be(peer, true);
> > +        } else {
> > +            r = qemu_set_vnet_le(peer, true);
> > +        }
> > +
> > +        n->needs_vnet_hdr_swap = !!r;
> > +    } else if (virtio_net_started(n, vdev->status) &&
> > +               !virtio_net_started(n, status)) {
> > +        if (virtio_is_big_endian(vdev)) {
> > +            qemu_set_vnet_be(peer, false);
> > +        } else {
> > +            qemu_set_vnet_le(peer, false);
> > +        }
> > +    }
> > +}
> 
> Could you explain why check 'virtio_net_started(n, status)' and then
> 'virtio_net_started(n, vdev->status)' ?
> 

Before using the device, we need to inform the network backend about
the endianness to use when parsing vnet headers. We do this when the
driver activates the device (DRIVER_OK). This is the first check.

After using the device, we need to reset the network backend to the
default (guest native endianness), otherwise the guest may loose network
connectivity if it is rebooted into a different endianness. We do this
when the driver deactivates the device (no DRIVER_OK). The second check
ensures the device was active before: if we don't check that, the 'else'
branch would be executed each time the driver updates the status with
something not containing DRIVER_OK... :-\

> Why qemu_set_vnet_[bl]e() use "true" in the first case and "false" in
> the second case ?
> 

"true" tells the backend to enforce the corresponding endianness.
"false" tells the backed to reset to the default (guest native endianness).

> Why don't you store the result (r) in the second case ?
> 

Because @needs_vnet_hdr_swap is only being used when the device is active.

Thank you for the time you spent on reviewing this series !

Bonne Annee !

--
Greg

> >  static void virtio_net_set_status(struct VirtIODevice *vdev, uint8_t 
> > status)
> >  {
> >      VirtIONet *n = VIRTIO_NET(vdev);
> > @@ -159,6 +184,7 @@ static void virtio_net_set_status(struct VirtIODevice 
> > *vdev, uint8_t status)
> >      int i;
> >      uint8_t queue_status;
> >  
> > +    virtio_net_vnet_status(n, status);
> >      virtio_net_vhost_status(n, status);
> >  
> >      for (i = 0; i < n->max_queues; i++) {
> > @@ -957,7 +983,10 @@ static void receive_header(VirtIONet *n, const struct 
> > iovec *iov, int iov_cnt,
> >          void *wbuf = (void *)buf;
> >          work_around_broken_dhclient(wbuf, wbuf + n->host_hdr_len,
> >                                      size - n->host_hdr_len);
> > -        virtio_net_hdr_swap(VIRTIO_DEVICE(n), wbuf);
> > +
> > +        if (n->needs_vnet_hdr_swap) {
> > +            virtio_net_hdr_swap(VIRTIO_DEVICE(n), wbuf);
> > +        }
> >          iov_from_buf(iov, iov_cnt, 0, buf, sizeof(struct virtio_net_hdr));
> >      } else {
> >          struct virtio_net_hdr hdr = {
> > @@ -1167,7 +1196,7 @@ static int32_t virtio_net_flush_tx(VirtIONetQueue *q)
> >                  error_report("virtio-net header incorrect");
> >                  exit(1);
> >              }
> > -            if (virtio_needs_swap(vdev)) {
> > +            if (n->needs_vnet_hdr_swap) {
> >                  virtio_net_hdr_swap(vdev, (void *) &mhdr);
> >                  sg2[0].iov_base = &mhdr;
> >                  sg2[0].iov_len = n->guest_hdr_len;
> > diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h
> > index f3cc25feca2b..27bc868fbc7d 100644
> > --- a/include/hw/virtio/virtio-net.h
> > +++ b/include/hw/virtio/virtio-net.h
> > @@ -94,6 +94,7 @@ typedef struct VirtIONet {
> >      uint64_t curr_guest_offloads;
> >      QEMUTimer *announce_timer;
> >      int announce_counter;
> > +    bool needs_vnet_hdr_swap;
> >  } VirtIONet;
> >  
> >  void virtio_net_set_netclient_name(VirtIONet *n, const char *name,
> > 
> > 
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]