[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v16 07/14] vfio: add aer support for vfio device
From: |
Cao jin |
Subject: |
[Qemu-devel] [PATCH v16 07/14] vfio: add aer support for vfio device |
Date: |
Tue, 12 Jan 2016 10:43:08 +0800 |
From: Chen Fan <address@hidden>
Calling pcie_aer_init to initilize aer related registers for
vfio device, then reload physical related registers to expose
device capability.
Signed-off-by: Chen Fan <address@hidden>
---
hw/vfio/pci.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
hw/vfio/pci.h | 3 +++
2 files changed, 81 insertions(+), 3 deletions(-)
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 64b0867..38b0aa5 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -1832,6 +1832,62 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t
pos)
return 0;
}
+static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t cap_ver,
+ int pos, uint16_t size)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ PCIDevice *dev_iter;
+ uint8_t type;
+ uint32_t errcap;
+
+ if (!(vdev->features & VFIO_FEATURE_ENABLE_AER)) {
+ pcie_add_capability(pdev, PCI_EXT_CAP_ID_ERR,
+ cap_ver, pos, size);
+ return 0;
+ }
+
+ dev_iter = pci_bridge_get_device(pdev->bus);
+ if (!dev_iter) {
+ goto error;
+ }
+
+ while (dev_iter) {
+ type = pcie_cap_get_type(dev_iter);
+ if ((type != PCI_EXP_TYPE_ROOT_PORT &&
+ type != PCI_EXP_TYPE_UPSTREAM &&
+ type != PCI_EXP_TYPE_DOWNSTREAM)) {
+ goto error;
+ }
+
+ if (!dev_iter->exp.aer_cap) {
+ goto error;
+ }
+
+ dev_iter = pci_bridge_get_device(dev_iter->bus);
+ }
+
+ errcap = vfio_pci_read_config(pdev, pos + PCI_ERR_CAP, 4);
+ /*
+ * The ability to record multiple headers is depending on
+ * the state of the Multiple Header Recording Capable bit and
+ * enabled by the Multiple Header Recording Enable bit.
+ */
+ if ((errcap & PCI_ERR_CAP_MHRC) &&
+ (errcap & PCI_ERR_CAP_MHRE)) {
+ pdev->exp.aer_log.log_max = PCIE_AER_LOG_MAX_DEFAULT;
+ } else {
+ pdev->exp.aer_log.log_max = 0;
+ }
+
+ pcie_cap_deverr_init(pdev);
+ return pcie_aer_init(pdev, pos, size);
+
+error:
+ error_report("vfio: Unable to enable AER for device %s, parent bus "
+ "does not support AER signaling", vdev->vbasedev.name);
+ return -1;
+}
+
static int vfio_add_ext_cap(VFIOPCIDevice *vdev)
{
PCIDevice *pdev = &vdev->pdev;
@@ -1839,6 +1895,7 @@ static int vfio_add_ext_cap(VFIOPCIDevice *vdev)
uint16_t cap_id, next, size;
uint8_t cap_ver;
uint8_t *config;
+ int ret = 0;
/*
* In order to avoid breaking config space, create a copy to
@@ -1860,16 +1917,29 @@ static int vfio_add_ext_cap(VFIOPCIDevice *vdev)
*/
size = vfio_ext_cap_max_size(config, next);
- pcie_add_capability(pdev, cap_id, cap_ver, next, size);
- pci_set_long(dev->config + next, PCI_EXT_CAP(cap_id, cap_ver, 0));
+ switch (cap_id) {
+ case PCI_EXT_CAP_ID_ERR:
+ ret = vfio_setup_aer(vdev, cap_ver, next, size);
+ break;
+ default:
+ pcie_add_capability(pdev, cap_id, cap_ver, next, size);
+ break;
+ }
+
+ if (ret) {
+ goto out;
+ }
+
+ pci_set_long(pdev->config + next, PCI_EXT_CAP(cap_id, cap_ver, 0));
/* Use emulated next pointer to allow dropping extended caps */
pci_long_test_and_set_mask(vdev->emulated_config_bits + next,
PCI_EXT_CAP_NEXT_MASK);
}
+out:
g_free(config);
- return 0;
+ return ret;
}
static int vfio_add_capabilities(VFIOPCIDevice *vdev)
@@ -2624,6 +2694,11 @@ static int vfio_initfn(PCIDevice *pdev)
goto out_teardown;
}
+ if ((vdev->features & VFIO_FEATURE_ENABLE_AER) &&
+ !pdev->exp.aer_cap) {
+ goto out_teardown;
+ }
+
/* QEMU emulates all of MSI & MSIX */
if (pdev->cap_present & QEMU_PCI_CAP_MSIX) {
memset(vdev->emulated_config_bits + pdev->msix_cap, 0xff,
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index f004d52..48c1f69 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -15,6 +15,7 @@
#include "qemu-common.h"
#include "exec/memory.h"
#include "hw/pci/pci.h"
+#include "hw/pci/pci_bridge.h"
#include "hw/vfio/vfio-common.h"
#include "qemu/event_notifier.h"
#include "qemu/queue.h"
@@ -127,6 +128,8 @@ typedef struct VFIOPCIDevice {
#define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)
#define VFIO_FEATURE_ENABLE_REQ_BIT 1
#define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
+#define VFIO_FEATURE_ENABLE_AER_BIT 2
+#define VFIO_FEATURE_ENABLE_AER (1 << VFIO_FEATURE_ENABLE_AER_BIT)
int32_t bootindex;
uint8_t pm_cap;
bool has_vga;
--
1.9.3
- [Qemu-devel] [PATCH v16 01/14] vfio: extract vfio_get_hot_reset_info as a single function, (continued)
- [Qemu-devel] [PATCH v16 01/14] vfio: extract vfio_get_hot_reset_info as a single function, Cao jin, 2016/01/11
- [Qemu-devel] [PATCH v16 02/14] vfio: squeeze out vfio_pci_do_hot_reset for support bus reset, Cao jin, 2016/01/11
- [Qemu-devel] [PATCH v16 03/14] pcie: modify the capability size assert, Cao jin, 2016/01/11
- [Qemu-devel] [PATCH v16 04/14] vfio: make the 4 bytes aligned for capability size, Cao jin, 2016/01/11
- [Qemu-devel] [PATCH v16 05/14] vfio: add pcie extanded capability support, Cao jin, 2016/01/11
- [Qemu-devel] [PATCH v16 07/14] vfio: add aer support for vfio device,
Cao jin <=
- [Qemu-devel] [PATCH v16 06/14] aer: impove pcie_aer_init to support vfio device, Cao jin, 2016/01/11
- [Qemu-devel] [PATCH v16 08/14] vfio: add check host bus reset is support or not, Cao jin, 2016/01/11
- [Qemu-devel] [PATCH v16 10/14] pci: introduce pci bus pre reset, Cao jin, 2016/01/11
- [Qemu-devel] [PATCH v16 09/14] add check reset mechanism when hotplug vfio device, Cao jin, 2016/01/11