[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v1 08/22] migration: convert post-copy to use QI
From: |
Daniel P. Berrange |
Subject: |
Re: [Qemu-devel] [PATCH v1 08/22] migration: convert post-copy to use QIOChannelBuffer |
Date: |
Mon, 25 Jan 2016 22:15:54 +0000 |
User-agent: |
Mutt/1.5.24 (2015-08-30) |
On Mon, Jan 25, 2016 at 07:38:59PM +0000, Dr. David Alan Gilbert wrote:
> * Daniel P. Berrange (address@hidden) wrote:
> > The post-copy code does some I/O to/from an intermediate
> > in-memory buffer rather than direct to the underlying
> > I/O channel. Switch this code to use QIOChannelBuffer
> > instead of QEMUSizedBuffer.
> >
> > Signed-off-by: Daniel P. Berrange <address@hidden>
> > ---
> > docs/migration.txt | 4 ++--
> > include/sysemu/sysemu.h | 2 +-
> > migration/migration.c | 15 +++++++--------
> > migration/savevm.c | 41 +++++++++++++----------------------------
> > 4 files changed, 23 insertions(+), 39 deletions(-)
> >
> > diff --git a/docs/migration.txt b/docs/migration.txt
> > index fda8d61..11703de 100644
> > --- a/docs/migration.txt
> > +++ b/docs/migration.txt
> > @@ -403,8 +403,8 @@ listen thread: --- page -- page --
> > page -- page -- page --
> >
> > On receipt of CMD_PACKAGED (1)
> > All the data associated with the package - the ( ... ) section in the
> > -diagram - is read into memory (into a QEMUSizedBuffer), and the main thread
> > -recurses into qemu_loadvm_state_main to process the contents of the
> > package (2)
> > +diagram - is read into memory, and the main thread recurses into
> > +qemu_loadvm_state_main to process the contents of the package (2)
> > which contains commands (3,6) and devices (4...)
> >
> > On receipt of 'postcopy listen' - 3 -(i.e. the 1st command in the package)
> > diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> > index 3bb8897..0f59912 100644
> > --- a/include/sysemu/sysemu.h
> > +++ b/include/sysemu/sysemu.h
> > @@ -120,7 +120,7 @@ void qemu_savevm_command_send(QEMUFile *f, enum
> > qemu_vm_cmd command,
> > uint16_t len, uint8_t *data);
> > void qemu_savevm_send_ping(QEMUFile *f, uint32_t value);
> > void qemu_savevm_send_open_return_path(QEMUFile *f);
> > -int qemu_savevm_send_packaged(QEMUFile *f, const QEMUSizedBuffer *qsb);
> > +int qemu_savevm_send_packaged(QEMUFile *f, const char *buf, size_t len);
> > void qemu_savevm_send_postcopy_advise(QEMUFile *f);
> > void qemu_savevm_send_postcopy_listen(QEMUFile *f);
> > void qemu_savevm_send_postcopy_run(QEMUFile *f);
> > diff --git a/migration/migration.c b/migration/migration.c
> > index 715f069..e921b20 100644
> > --- a/migration/migration.c
> > +++ b/migration/migration.c
> > @@ -33,6 +33,7 @@
> > #include "qom/cpu.h"
> > #include "exec/memory.h"
> > #include "exec/address-spaces.h"
> > +#include "io/channel-buffer.h"
> >
> > #define MAX_THROTTLE (32 << 20) /* Migration transfer speed
> > throttling */
> >
> > @@ -1401,7 +1402,8 @@ static int
> > await_return_path_close_on_source(MigrationState *ms)
> > static int postcopy_start(MigrationState *ms, bool *old_vm_running)
> > {
> > int ret;
> > - const QEMUSizedBuffer *qsb;
> > + QIOChannelBuffer *bioc;
> > + QEMUFile *fb;
> > int64_t time_at_stop = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
> > migrate_set_state(ms, MIGRATION_STATUS_ACTIVE,
> > MIGRATION_STATUS_POSTCOPY_ACTIVE);
> > @@ -1456,11 +1458,9 @@ static int postcopy_start(MigrationState *ms, bool
> > *old_vm_running)
> > * So we wrap the device state up in a package with a length at the
> > start;
> > * to do this we use a qemu_buf to hold the whole of the device state.
> > */
> > - QEMUFile *fb = qemu_bufopen("w", NULL);
> > - if (!fb) {
> > - error_report("Failed to create buffered file");
> > - goto fail;
> > - }
> > + bioc = qio_channel_buffer_new(4096);
> > + fb = qemu_fopen_channel_input(QIO_CHANNEL(bioc));
>
> Why is that _input ?
A mistake - should be output given that the old code used "w".
> Also, what's your naming converntion; my 'qsb' was just an
> abbreviation of (Q)EMU(S)ized(B)uffer; what's a bioc?
In the vast majority of cases where you just have a pointer
to the generic base class QIOChannel, then I'll use 'ioc' as
the standard variable name - ie 'io' and 'c' for channel.
If I have a specialized subtype, I prefix a single letter
reflecting the name of the subtype. eg 's' for QIOChannelSocket
giving "sioc" and 'b' for QIOChannelBuffer giving "bioc" etc.
> > + object_unref(OBJECT(bioc));
> >
> > /*
> > * Make sure the receiver can get incoming pages before we send the
> > rest
> > @@ -1474,10 +1474,9 @@ static int postcopy_start(MigrationState *ms, bool
> > *old_vm_running)
> > qemu_savevm_send_postcopy_run(fb);
> >
> > /* <><> end of stuff going into the package */
> > - qsb = qemu_buf_get(fb);
> >
> > /* Now send that blob */
> > - if (qemu_savevm_send_packaged(ms->file, qsb)) {
> > + if (qemu_savevm_send_packaged(ms->file, bioc->data, bioc->usage)) {
> > goto fail_closefb;
> > }
> > qemu_fclose(fb);
> > diff --git a/migration/savevm.c b/migration/savevm.c
> > index 0ad1b93..f2e1880 100644
> > --- a/migration/savevm.c
> > +++ b/migration/savevm.c
> > @@ -50,6 +50,7 @@
> > #include "qemu/iov.h"
> > #include "block/snapshot.h"
> > #include "block/qapi.h"
> > +#include "io/channel-buffer.h"
> >
> >
> > #ifndef ETH_P_RARP
> > @@ -760,10 +761,8 @@ void qemu_savevm_send_open_return_path(QEMUFile *f)
> > * 0 on success
> > * -ve on error
> > */
> > -int qemu_savevm_send_packaged(QEMUFile *f, const QEMUSizedBuffer *qsb)
> > +int qemu_savevm_send_packaged(QEMUFile *f, const char *buf, size_t len)
> > {
> > - size_t cur_iov;
> > - size_t len = qsb_get_length(qsb);
> > uint32_t tmp;
> >
> > if (len > MAX_VM_CMD_PACKAGED_SIZE) {
> > @@ -777,18 +776,7 @@ int qemu_savevm_send_packaged(QEMUFile *f, const
> > QEMUSizedBuffer *qsb)
> > trace_qemu_savevm_send_packaged();
> > qemu_savevm_command_send(f, MIG_CMD_PACKAGED, 4, (uint8_t *)&tmp);
> >
> > - /* all the data follows (concatinating the iov's) */
> > - for (cur_iov = 0; cur_iov < qsb->n_iov; cur_iov++) {
> > - /* The iov entries are partially filled */
> > - size_t towrite = MIN(qsb->iov[cur_iov].iov_len, len);
> > - len -= towrite;
> > -
> > - if (!towrite) {
> > - break;
> > - }
> > -
> > - qemu_put_buffer(f, qsb->iov[cur_iov].iov_base, towrite);
> > - }
> > + qemu_put_buffer(f, (const uint8_t *)buf, len);
> >
> > return 0;
> > }
> > @@ -1548,9 +1536,8 @@ static int
> > loadvm_postcopy_handle_run(MigrationIncomingState *mis)
> > static int loadvm_handle_cmd_packaged(MigrationIncomingState *mis)
> > {
> > int ret;
> > - uint8_t *buffer;
> > uint32_t length;
> > - QEMUSizedBuffer *qsb;
> > + QIOChannelBuffer *bioc;
> >
> > length = qemu_get_be32(mis->from_src_file);
> > trace_loadvm_handle_cmd_packaged(length);
> > @@ -1559,28 +1546,26 @@ static int
> > loadvm_handle_cmd_packaged(MigrationIncomingState *mis)
> > error_report("Unreasonably large packaged state: %u", length);
> > return -1;
> > }
> > - buffer = g_malloc0(length);
> > - ret = qemu_get_buffer(mis->from_src_file, buffer, (int)length);
> > +
> > + bioc = qio_channel_buffer_new(length);
> > + ret = qemu_get_buffer(mis->from_src_file,
> > + (uint8_t *)bioc->data,
> > + (int)length);
>
> Actually, qemu_get_buffer takes a size_t now; so you can fix that at the same
> time.
Great.
>
> > if (ret != length) {
> > - g_free(buffer);
> > + object_unref(OBJECT(bioc));
> > error_report("CMD_PACKAGED: Buffer receive fail ret=%d
> > length=%d\n",
> > ret, length);
> > return (ret < 0) ? ret : -EAGAIN;
> > }
> > + bioc->usage += length;
>
> I'm a bit surprised you've not wrapped feeding the data
> into the qio_channel_buffer up a bit rather than having the callers
> prod at it's buffer/usage elements directly.
I figured it was better to avoid extra memcpy's in the migration code,
so decided to directly pass the internal buffer to get_qemu_buffer().
Regards,
Daniel
--
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org -o- http://virt-manager.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
- [Qemu-devel] [PATCH v1 02/22] migration: remove use of qemu_bufopen from vmstate tests, (continued)
- [Qemu-devel] [PATCH v1 02/22] migration: remove use of qemu_bufopen from vmstate tests, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 03/22] migration: ensure qemu_fflush() always writes full data amount, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 04/22] migration: split migration hooks out of QEMUFileOps, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 05/22] migration: introduce set_blocking function in QEMUFileOps, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 06/22] migration: force QEMUFile to blocking mode for outgoing migration, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 07/22] migration: introduce a new QEMUFile impl based on QIOChannel, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 09/22] migration: convert unix socket protocol to use QIOChannel, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 14/22] migration: convert savevm to use QIOChannel for writing to files, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 08/22] migration: convert post-copy to use QIOChannelBuffer, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 15/22] migration: delete QEMUFile buffer implementation, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 16/22] migration: delete QEMUSizedBuffer struct, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 10/22] migration: convert tcp socket protocol to use QIOChannel, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 12/22] migration: convert exec socket protocol to use QIOChannel, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 11/22] migration: convert fd socket protocol to use QIOChannel, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 17/22] migration: delete QEMUFile sockets implementation, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 13/22] migration: convert RDMA to use QIOChannel interface, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 19/22] migration: move definition of struct QEMUFile back into qemu-file.c, Daniel P. Berrange, 2016/01/12
- [Qemu-devel] [PATCH v1 18/22] migration: delete QEMUFile stdio implementation, Daniel P. Berrange, 2016/01/12