[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH COLO-Frame v14 11/40] COLO: Load PVM's dirty pages i
From: |
zhanghailiang |
Subject: |
[Qemu-devel] [PATCH COLO-Frame v14 11/40] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily |
Date: |
Sat, 6 Feb 2016 17:28:23 +0800 |
We should not load PVM's state directly into SVM, because there maybe some
errors happen when SVM is receving data, which will break SVM.
We need to ensure receving all data before load the state into SVM. We use
an extra memory to cache these data (PVM's ram). The ram cache in secondary side
is initially the same as SVM/PVM's memory. And in the process of checkpoint,
we cache the dirty pages of PVM into this ram cache firstly, so this ram cache
always the same as PVM's memory at every checkpoint, then we flush this cached
ram
to SVM after we receive all PVM's state.
Signed-off-by: zhanghailiang <address@hidden>
Signed-off-by: Li Zhijian <address@hidden>
Signed-off-by: Gonglei <address@hidden>
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
---
v12:
- Fix minor error in error_report (Dave's comment)
- Add Reviewed-by tag
v11:
- Rename 'host_cache' to 'colo_cache' (Dave's suggestion)
v10:
- Split the process of dirty pages recording into a new patch
---
include/exec/ram_addr.h | 1 +
include/migration/migration.h | 4 +++
migration/colo.c | 11 +++++++
migration/ram.c | 73 ++++++++++++++++++++++++++++++++++++++++++-
4 files changed, 88 insertions(+), 1 deletion(-)
diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index 606e277..a11c3b9 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -26,6 +26,7 @@ struct RAMBlock {
struct rcu_head rcu;
struct MemoryRegion *mr;
uint8_t *host;
+ uint8_t *colo_cache; /* For colo, VM's ram cache */
ram_addr_t offset;
ram_addr_t used_length;
ram_addr_t max_length;
diff --git a/include/migration/migration.h b/include/migration/migration.h
index e7a516c..6907986 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -332,4 +332,8 @@ int ram_save_queue_pages(MigrationState *ms, const char
*rbname,
PostcopyState postcopy_state_get(void);
/* Set the state and return the old state */
PostcopyState postcopy_state_set(PostcopyState new_state);
+
+/* ram cache */
+int colo_init_ram_cache(void);
+void colo_release_ram_cache(void);
#endif
diff --git a/migration/colo.c b/migration/colo.c
index 7e4692c..57a1132 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -298,6 +298,7 @@ void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
Error *local_err = NULL;
+ int ret;
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
@@ -313,6 +314,12 @@ void *colo_process_incoming_thread(void *opaque)
*/
qemu_file_set_blocking(mis->from_src_file, true);
+ ret = colo_init_ram_cache();
+ if (ret < 0) {
+ error_report("Failed to initialize ram cache");
+ goto out;
+ }
+
colo_put_cmd(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
&local_err);
if (local_err) {
@@ -363,6 +370,10 @@ out:
error_report_err(local_err);
}
+ qemu_mutex_lock_iothread();
+ colo_release_ram_cache();
+ qemu_mutex_unlock_iothread();
+
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
}
diff --git a/migration/ram.c b/migration/ram.c
index 7b3e1db..d49662d 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -224,6 +224,7 @@ static RAMBlock *last_sent_block;
static ram_addr_t last_offset;
static QemuMutex migration_bitmap_mutex;
static uint64_t migration_dirty_pages;
+static bool ram_cache_enable;
static uint32_t last_version;
static bool ram_bulk_stage;
@@ -2191,6 +2192,20 @@ static inline void *host_from_ram_block_offset(RAMBlock
*block,
return block->host + offset;
}
+static inline void *colo_cache_from_block_offset(RAMBlock *block,
+ ram_addr_t offset)
+{
+ if (!offset_in_ramblock(block, offset)) {
+ return NULL;
+ }
+ if (!block->colo_cache) {
+ error_report("%s: colo_cache is NULL in block :%s",
+ __func__, block->idstr);
+ return NULL;
+ }
+ return block->colo_cache + offset;
+}
+
/*
* If a page (or a whole RDMA chunk) has been
* determined to be zero, then zap it.
@@ -2467,7 +2482,12 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
RAMBlock *block = ram_block_from_stream(f, flags);
- host = host_from_ram_block_offset(block, addr);
+ /* After going into COLO, we should load the Page into colo_cache
*/
+ if (ram_cache_enable) {
+ host = colo_cache_from_block_offset(block, addr);
+ } else {
+ host = host_from_ram_block_offset(block, addr);
+ }
if (!host) {
error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
ret = -EINVAL;
@@ -2562,6 +2582,57 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
return ret;
}
+/*
+ * colo cache: this is for secondary VM, we cache the whole
+ * memory of the secondary VM, it will be called after first migration.
+ */
+int colo_init_ram_cache(void)
+{
+ RAMBlock *block;
+
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ block->colo_cache = qemu_anon_ram_alloc(block->used_length, NULL);
+ if (!block->colo_cache) {
+ error_report("%s: Can't alloc memory for COLO cache of block %s,"
+ "size 0x" RAM_ADDR_FMT, __func__, block->idstr,
+ block->used_length);
+ goto out_locked;
+ }
+ memcpy(block->colo_cache, block->host, block->used_length);
+ }
+ rcu_read_unlock();
+ ram_cache_enable = true;
+ return 0;
+
+out_locked:
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ if (block->colo_cache) {
+ qemu_anon_ram_free(block->colo_cache, block->used_length);
+ block->colo_cache = NULL;
+ }
+ }
+
+ rcu_read_unlock();
+ return -errno;
+}
+
+void colo_release_ram_cache(void)
+{
+ RAMBlock *block;
+
+ ram_cache_enable = false;
+
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ if (block->colo_cache) {
+ qemu_anon_ram_free(block->colo_cache, block->used_length);
+ block->colo_cache = NULL;
+ }
+ }
+ rcu_read_unlock();
+}
+
static SaveVMHandlers savevm_ram_handlers = {
.save_live_setup = ram_save_setup,
.save_live_iterate = ram_save_iterate,
--
1.8.3.1
- [Qemu-devel] [PATCH COLO-Frame v14 10/40] COLO: Save PVM state to secondary side when do checkpoint, (continued)
- [Qemu-devel] [PATCH COLO-Frame v14 10/40] COLO: Save PVM state to secondary side when do checkpoint, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 20/40] COLO: Implement failover work for Secondary VM, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 06/40] COLO/migration: Create a new communication path from destination to source, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 08/40] COLO: Add a new RunState RUN_STATE_COLO, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 14/40] COLO: Flush PVM's cached RAM into SVM's memory, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 07/40] COLO: Implement colo checkpoint protocol, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 12/40] ram/COLO: Record the dirty pages that SVM received, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 03/40] COLO: migrate colo related info to secondary node, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 16/40] COLO: synchronize PVM's state to SVM periodically, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 13/40] COLO: Load VMState into qsb before restore it, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 11/40] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily,
zhanghailiang <=
- [Qemu-devel] [PATCH COLO-Frame v14 17/40] COLO failover: Introduce a new command to trigger a failover, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 19/40] COLO: Implement failover work for Primary VM, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 25/40] COLO: Update the global runstate after going into colo state, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 33/40] filter-buffer: Accept zero interval, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 24/40] COLO: Process shutdown command for VM in COLO state, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 28/40] migration/savevm: Export two helper functions for savevm process, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 29/40] COLO: Separate the process of saving/loading ram and device state, zhanghailiang, 2016/02/06
- [Qemu-devel] [PATCH COLO-Frame v14 27/40] migration/savevm: Add new helpers to process the different stages of loadvm, zhanghailiang, 2016/02/06