[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 09/28] qemu-nbd: Fix unintended texi verbatim formatt
From: |
Paolo Bonzini |
Subject: |
[Qemu-devel] [PULL 09/28] qemu-nbd: Fix unintended texi verbatim formatting |
Date: |
Mon, 8 Feb 2016 18:03:00 +0100 |
From: Sitsofe Wheeler <address@hidden>
Indented lines in the texi meant the perlpod produced interpreted the
paragraph as being verbatim (thus formatting codes were not
interpreted). Fix this by un-indenting problem lines.
Signed-off-by: Sitsofe Wheeler <address@hidden>
Message-Id: <address@hidden>
Signed-off-by: Paolo Bonzini <address@hidden>
---
qemu-nbd.texi | 58 +++++++++++++++++++++++++++++-----------------------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/qemu-nbd.texi b/qemu-nbd.texi
index 46fd483..26cc985 100644
--- a/qemu-nbd.texi
+++ b/qemu-nbd.texi
@@ -13,56 +13,56 @@ Export QEMU disk image using NBD protocol.
@c man begin OPTIONS
@table @option
@item @var{filename}
- is a disk image filename
+is a disk image filename
@item -p, address@hidden
- port to listen on (default @samp{10809})
+port to listen on (default @samp{10809})
@item -o, address@hidden
- offset into the image
+offset into the image
@item -b, address@hidden
- interface to bind to (default @samp{0.0.0.0})
+interface to bind to (default @samp{0.0.0.0})
@item -k, address@hidden
- Use a unix socket with path @var{path}
+Use a unix socket with path @var{path}
@item -f, address@hidden
- Set image format as @var{format}
+Set image format as @var{format}
@item -r, --read-only
- export read-only
+export read-only
@item -P, address@hidden
- only expose partition @var{num}
+only expose partition @var{num}
@item -s, --snapshot
- use @var{filename} as an external snapshot, create a temporary
- file with address@hidden, redirect the write to
- the temporary one
+use @var{filename} as an external snapshot, create a temporary
+file with address@hidden, redirect the write to
+the temporary one
@item -l, address@hidden
- load an internal snapshot inside @var{filename} and export it
- as an read-only device, @var{snapshot_param} format is
- 'snapshot.id=[ID],snapshot.name=[NAME]' or '[ID_OR_NAME]'
+load an internal snapshot inside @var{filename} and export it
+as an read-only device, @var{snapshot_param} format is
+'snapshot.id=[ID],snapshot.name=[NAME]' or '[ID_OR_NAME]'
@item -n, --nocache
@itemx address@hidden
- set cache mode to be used with the file. See the documentation of
- the emulator's @code{-drive cache=...} option for allowed values.
+set cache mode to be used with the file. See the documentation of
+the emulator's @code{-drive cache=...} option for allowed values.
@item address@hidden
- choose asynchronous I/O mode between @samp{threads} (the default)
- and @samp{native} (Linux only).
+choose asynchronous I/O mode between @samp{threads} (the default)
+and @samp{native} (Linux only).
@item address@hidden
- toggles whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
- requests are ignored or passed to the filesystem. The default is no
- (@samp{--discard=ignore}).
+toggles whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
+requests are ignored or passed to the filesystem. The default is no
+(@samp{--discard=ignore}).
@item -c, address@hidden
- connect @var{filename} to NBD device @var{dev}
+connect @var{filename} to NBD device @var{dev}
@item -d, --disconnect
- disconnect the specified device
+disconnect the specified device
@item -e, address@hidden
- device can be shared by @var{num} clients (default @samp{1})
+device can be shared by @var{num} clients (default @samp{1})
@item -f, address@hidden
- force block driver for format @var{fmt} instead of auto-detecting
+force block driver for format @var{fmt} instead of auto-detecting
@item -t, --persistent
- don't exit on the last connection
+don't exit on the last connection
@item -v, --verbose
- display extra debugging information
+display extra debugging information
@item -h, --help
- display this help and exit
+display this help and exit
@item -V, --version
- output version information and exit
+output version information and exit
@end table
@c man end
--
1.8.3.1
- [Qemu-devel] [PULL 00/28] Misc changes for 2016-02-08, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 01/28] memory: add early bail out from cpu_physical_memory_set_dirty_range, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 03/28] qemu-char: Keep pty slave file descriptor open until the master is closed, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 02/28] memory: RCU ram_list.dirty_memory[] for safe RAM hotplug, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 06/28] scsi: push WWN fields up to SCSIDevice, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 07/28] scsi-generic: grab device and port SAS addresses from backend, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 05/28] include/qemu/atomic.h: default to __atomic functions, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 04/28] configure: sanity check the glib library that pkg-config finds, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 09/28] qemu-nbd: Fix unintended texi verbatim formatting,
Paolo Bonzini <=
- [Qemu-devel] [PULL 12/28] scripts/kvm/kvm_stat: Fix tracefs access checking, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 14/28] kvm-all: trace: strerror fixup, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 17/28] target-i386: Introduce mo_stacksize, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 15/28] char: fix repeated registration of tcp chardev I/O handlers, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 18/28] target-i386: Use gen_lea_v_seg in gen_lea_modrm, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 19/28] target-i386: Use gen_lea_v_seg in stack subroutines, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 10/28] qemu-nbd: Minor texi updates, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 11/28] qemu-nbd: Fix texi sentence capitalisation, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 13/28] nbd: avoid unaligned uint64_t store, Paolo Bonzini, 2016/02/08
- [Qemu-devel] [PULL 16/28] target-i386: Create gen_lea_v_seg, Paolo Bonzini, 2016/02/08