[Qemu-devel] [PATCH v7 0/5] add ACPI node for fw_cfg on pc and arm

[Gabriel L. Somlo]

Generate an ACPI DSDT node for fw_cfg on pc and arm guests.

New since v6:
        - rebased to fit on top of fb306ff and f264d36, which moved things
          around in pc's acpi-build.c (only patch 3/5 affected);
        - kernel-side fw_cfg sysfs driver accepted into upstream linux

Thanks,
 --Gabriel

>New since v5:
>
>       - rebased on top of latest QEMU git master
>
>>New since v4:
>>
>>      - rebased on top of Marc's DMA series
>>      - drop machine compat dependency for insertion into x86/ssdt
>>        (patch 3/5), following agreement between Igor and Eduardo
>>      - [mm]io register range now covers DMA register as well, if
>>        available.
>>      - s/bios/firmware in doc file updates
>>
>>>New since v3:
>>>
>>>     - rebased to work on top of 87e896ab (introducing pc-*-25 classes),
>>>       inserting fw_cfg acpi node only for machines >= 2.5.
>>>
>>>     - reintroduce _STA with value 0x0B (bit 2 for u/i visibility turned
>>>       off to avoid Windows complaining -- thanks Igor for catching that!)
>>>
>>>If there's any other feedback besides questions regarding the
>>>appropriateness of "QEMU0002" as the value of _HID, please don't hesitate!
>>>
>>>>New since v2:
>>>>
>>>>    - pc/i386 node in ssdt only on machine types *newer* than 2.4
>>>>      (as suggested by Eduardo)
>>>>
>>>>I appreciate any further comments and reviews. Hopefully we can make
>>>>this palatable for upstream, modulo the lingering concerns about whether
>>>>"QEMU0002" is ok to use as the value of _HID, which I'll hopefully get
>>>>sorted out with the kernel crew...
>>>>
>>>>>New since v1:
>>>>>
>>>>>   - expose control register size (suggested by Marc Marí)
>>>>>
>>>>>   - leaving out _UID and _STA fields (thanks Shannon & Igor)
>>>>>
>>>>>   - using "QEMU0002" as the value of _HID (thanks Michael)
>>>>>
>>>>>   - added documentation blurb to docs/specs/fw_cfg.txt
>>>>>     (mainly to record usage of the "QEMU0002" string with fw_cfg).
>>>>>
>>>>>> This series adds a fw_cfg device node to the SSDT (on pc), or to the
>>>>>> DSDT (on arm).
>>>>>>
>>>>>>  - Patch 1/3 moves (and renames) the BIOS_CFG_IOPORT (0x510)
>>>>>>    define from pc.c to pc.h, so that it could be used from
>>>>>>    acpi-build.c in patch 2/3.
>>>>>> 
>>>>>>  - Patch 2/3 adds a fw_cfg node to the pc SSDT.
>>>>>> 
>>>>>>  - Patch 3/3 adds a fw_cfg node to the arm DSDT.
>>>>>>
>>>>>> I made up some names - "FWCF" for the node name, and "FWCF0001"
>>>>>> for _HID; no idea whether that's appropriate, or how else I should
>>>>>> figure out what to use instead...
>>>>>>
>>>>>> Also, using scope "\\_SB", based on where fw_cfg shows up in the
>>>>>> output of "info qtree". Again, if that's wrong, please point me in
>>>>>> the right direction.
>>>>>>
>>>>>> Re. 3/3 (also mentioned after the commit blurb in the patch itself),
>>>>>> I noticed none of the other DSDT entries contain a _STA field, wondering
>>>>>> why it would (not) make sense to include that, same as on the PC.

Gabriel L. Somlo (5):
  fw_cfg: expose control register size in fw_cfg.h
  pc: fw_cfg: move ioport base constant to pc.h
  acpi: pc: add fw_cfg device node to ssdt
  acpi: arm: add fw_cfg device node to dsdt
  fw_cfg: document ACPI device node information

 docs/specs/fw_cfg.txt     |  9 +++++++++
 hw/arm/virt-acpi-build.c  | 15 +++++++++++++++
 hw/i386/acpi-build.c      | 29 +++++++++++++++++++++++++++++
 hw/i386/pc.c              |  5 ++---
 hw/nvram/fw_cfg.c         |  4 +++-
 include/hw/i386/pc.h      |  2 ++
 include/hw/nvram/fw_cfg.h |  3 +++
 7 files changed, 63 insertions(+), 4 deletions(-)

-- 
2.4.3