[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 7/8] mips/kvm: Support MSA in MIPS KVM guests
|
From: |
Leon Alrae |
|
Subject: |
[Qemu-devel] [PULL 7/8] mips/kvm: Support MSA in MIPS KVM guests |
|
Date: |
Fri, 26 Feb 2016 11:16:59 +0000 |
From: James Hogan <address@hidden>
Support the new KVM_CAP_MIPS_MSA capability, which allows MIPS SIMD
Architecture (MSA) to be exposed to the KVM guest.
The capability is enabled if the guest core has MSA according to its
Config3 register. Various config bits are now writeable so that KVM is
aware of the configuration (Config3.MSAP) and so that QEMU can
save/restore the guest modifiable bits (Config5.MSAEn). The MSACSR/MSAIR
registers and the MSA vector registers are now saved/restored. Since the
FP registers are a subset of the vector registers, they are omitted if
the guest has MSA.
Signed-off-by: James Hogan <address@hidden>
Cc: Paolo Bonzini <address@hidden>
Cc: Leon Alrae <address@hidden>
Cc: Aurelien Jarno <address@hidden>
Signed-off-by: Leon Alrae <address@hidden>
---
target-mips/kvm.c | 129 +++++++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 109 insertions(+), 20 deletions(-)
diff --git a/target-mips/kvm.c b/target-mips/kvm.c
index a1f5b60..950bc05 100644
--- a/target-mips/kvm.c
+++ b/target-mips/kvm.c
@@ -31,6 +31,7 @@
do { if (DEBUG_KVM) { fprintf(stderr, fmt, ## __VA_ARGS__); } } while (0)
static int kvm_mips_fpu_cap;
+static int kvm_mips_msa_cap;
const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
KVM_CAP_LAST_INFO
@@ -49,6 +50,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
kvm_set_sigmask_len(s, 16);
kvm_mips_fpu_cap = kvm_check_extension(s, KVM_CAP_MIPS_FPU);
+ kvm_mips_msa_cap = kvm_check_extension(s, KVM_CAP_MIPS_MSA);
DPRINTF("%s\n", __func__);
return 0;
@@ -71,6 +73,15 @@ int kvm_arch_init_vcpu(CPUState *cs)
}
}
+ if (kvm_mips_msa_cap && env->CP0_Config3 & (1 << CP0C3_MSAP)) {
+ ret = kvm_vcpu_enable_cap(cs, KVM_CAP_MIPS_MSA, 0, 0);
+ if (ret < 0) {
+ /* mark unsupported so it gets disabled on reset */
+ kvm_mips_msa_cap = 0;
+ ret = 0;
+ }
+ }
+
DPRINTF("%s\n", __func__);
return ret;
}
@@ -83,6 +94,10 @@ void kvm_mips_reset_vcpu(MIPSCPU *cpu)
fprintf(stderr, "Warning: KVM does not support FPU, disabling\n");
env->CP0_Config1 &= ~(1 << CP0C1_FP);
}
+ if (!kvm_mips_msa_cap && env->CP0_Config3 & (1 << CP0C3_MSAP)) {
+ fprintf(stderr, "Warning: KVM does not support MSA, disabling\n");
+ env->CP0_Config3 &= ~(1 << CP0C3_MSAP);
+ }
DPRINTF("%s\n", __func__);
}
@@ -373,9 +388,11 @@ static inline int kvm_mips_get_one_ureg64(CPUState *cs,
uint64_t reg_id,
#define KVM_REG_MIPS_CP0_CONFIG1_MASK ((1U << CP0C1_M) | \
(1U << CP0C1_FP))
#define KVM_REG_MIPS_CP0_CONFIG2_MASK (1U << CP0C2_M)
-#define KVM_REG_MIPS_CP0_CONFIG3_MASK (1U << CP0C3_M)
+#define KVM_REG_MIPS_CP0_CONFIG3_MASK ((1U << CP0C3_M) | \
+ (1U << CP0C3_MSAP))
#define KVM_REG_MIPS_CP0_CONFIG4_MASK (1U << CP0C4_M)
-#define KVM_REG_MIPS_CP0_CONFIG5_MASK ((1U << CP0C5_UFE) | \
+#define KVM_REG_MIPS_CP0_CONFIG5_MASK ((1U << CP0C5_MSAEn) | \
+ (1U << CP0C5_UFE) | \
(1U << CP0C5_FRE) | \
(1U << CP0C5_UFR))
@@ -564,17 +581,53 @@ static int kvm_mips_put_fpu_registers(CPUState *cs, int
level)
ret = err;
}
- /* Floating point registers */
- for (i = 0; i < 32; ++i) {
- if (env->CP0_Status & (1 << CP0St_FR)) {
- err = kvm_mips_put_one_ureg64(cs, KVM_REG_MIPS_FPR_64(i),
- &env->active_fpu.fpr[i].d);
- } else {
- err = kvm_mips_get_one_ureg(cs, KVM_REG_MIPS_FPR_32(i),
-
&env->active_fpu.fpr[i].w[FP_ENDIAN_IDX]);
+ /*
+ * FPU register state is a subset of MSA vector state, so don't put FPU
+ * registers if we're emulating a CPU with MSA.
+ */
+ if (!(env->CP0_Config3 & (1 << CP0C3_MSAP))) {
+ /* Floating point registers */
+ for (i = 0; i < 32; ++i) {
+ if (env->CP0_Status & (1 << CP0St_FR)) {
+ err = kvm_mips_put_one_ureg64(cs, KVM_REG_MIPS_FPR_64(i),
+ &env->active_fpu.fpr[i].d);
+ } else {
+ err = kvm_mips_get_one_ureg(cs, KVM_REG_MIPS_FPR_32(i),
+ &env->active_fpu.fpr[i].w[FP_ENDIAN_IDX]);
+ }
+ if (err < 0) {
+ DPRINTF("%s: Failed to put FPR%u (%d)\n", __func__, i,
err);
+ ret = err;
+ }
}
+ }
+ }
+
+ /* Only put MSA state if we're emulating a CPU with MSA */
+ if (env->CP0_Config3 & (1 << CP0C3_MSAP)) {
+ /* MSA Control Registers */
+ if (level == KVM_PUT_FULL_STATE) {
+ err = kvm_mips_put_one_reg(cs, KVM_REG_MIPS_MSA_IR,
+ &env->msair);
+ if (err < 0) {
+ DPRINTF("%s: Failed to put MSA_IR (%d)\n", __func__, err);
+ ret = err;
+ }
+ }
+ err = kvm_mips_put_one_reg(cs, KVM_REG_MIPS_MSA_CSR,
+ &env->active_tc.msacsr);
+ if (err < 0) {
+ DPRINTF("%s: Failed to put MSA_CSR (%d)\n", __func__, err);
+ ret = err;
+ }
+
+ /* Vector registers (includes FP registers) */
+ for (i = 0; i < 32; ++i) {
+ /* Big endian MSA not supported by QEMU yet anyway */
+ err = kvm_mips_put_one_reg64(cs, KVM_REG_MIPS_VEC_128(i),
+ env->active_fpu.fpr[i].wr.d);
if (err < 0) {
- DPRINTF("%s: Failed to put FPR%u (%d)\n", __func__, i, err);
+ DPRINTF("%s: Failed to put VEC%u (%d)\n", __func__, i, err);
ret = err;
}
}
@@ -608,17 +661,53 @@ static int kvm_mips_get_fpu_registers(CPUState *cs)
restore_fp_status(env);
}
- /* Floating point registers */
- for (i = 0; i < 32; ++i) {
- if (env->CP0_Status & (1 << CP0St_FR)) {
- err = kvm_mips_get_one_ureg64(cs, KVM_REG_MIPS_FPR_64(i),
- &env->active_fpu.fpr[i].d);
- } else {
- err = kvm_mips_get_one_ureg(cs, KVM_REG_MIPS_FPR_32(i),
-
&env->active_fpu.fpr[i].w[FP_ENDIAN_IDX]);
+ /*
+ * FPU register state is a subset of MSA vector state, so don't save
FPU
+ * registers if we're emulating a CPU with MSA.
+ */
+ if (!(env->CP0_Config3 & (1 << CP0C3_MSAP))) {
+ /* Floating point registers */
+ for (i = 0; i < 32; ++i) {
+ if (env->CP0_Status & (1 << CP0St_FR)) {
+ err = kvm_mips_get_one_ureg64(cs, KVM_REG_MIPS_FPR_64(i),
+ &env->active_fpu.fpr[i].d);
+ } else {
+ err = kvm_mips_get_one_ureg(cs, KVM_REG_MIPS_FPR_32(i),
+ &env->active_fpu.fpr[i].w[FP_ENDIAN_IDX]);
+ }
+ if (err < 0) {
+ DPRINTF("%s: Failed to get FPR%u (%d)\n", __func__, i,
err);
+ ret = err;
+ }
}
+ }
+ }
+
+ /* Only get MSA state if we're emulating a CPU with MSA */
+ if (env->CP0_Config3 & (1 << CP0C3_MSAP)) {
+ /* MSA Control Registers */
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_MSA_IR,
+ &env->msair);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get MSA_IR (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_MSA_CSR,
+ &env->active_tc.msacsr);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get MSA_CSR (%d)\n", __func__, err);
+ ret = err;
+ } else {
+ restore_msa_fp_status(env);
+ }
+
+ /* Vector registers (includes FP registers) */
+ for (i = 0; i < 32; ++i) {
+ /* Big endian MSA not supported by QEMU yet anyway */
+ err = kvm_mips_get_one_reg64(cs, KVM_REG_MIPS_VEC_128(i),
+ env->active_fpu.fpr[i].wr.d);
if (err < 0) {
- DPRINTF("%s: Failed to get FPR%u (%d)\n", __func__, i, err);
+ DPRINTF("%s: Failed to get VEC%u (%d)\n", __func__, i, err);
ret = err;
}
}
--
2.1.0
- [Qemu-devel] [PULL 0/8] target-mips queue, Leon Alrae, 2016/02/26
- [Qemu-devel] [PULL 1/8] mips/kvm: Remove a couple of noisy DPRINTFs, Leon Alrae, 2016/02/26
- [Qemu-devel] [PULL 2/8] mips/kvm: Implement PRid CP0 register, Leon Alrae, 2016/02/26
- [Qemu-devel] [PULL 3/8] mips/kvm: Implement Config CP0 registers, Leon Alrae, 2016/02/26
- [Qemu-devel] [PULL 4/8] mips/kvm: Support unsigned KVM registers, Leon Alrae, 2016/02/26
- [Qemu-devel] [PULL 7/8] mips/kvm: Support MSA in MIPS KVM guests,
Leon Alrae <=
- [Qemu-devel] [PULL 6/8] mips/kvm: Support FPU in MIPS KVM guests, Leon Alrae, 2016/02/26
- [Qemu-devel] [PULL 5/8] mips/kvm: Support signed 64-bit KVM registers, Leon Alrae, 2016/02/26
- [Qemu-devel] [PULL 8/8] target-mips: implement R6 multi-threading, Leon Alrae, 2016/02/26
- Re: [Qemu-devel] [PULL 0/8] target-mips queue, Peter Maydell, 2016/02/26