qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [V6 1/4] hw/i386: Introduce AMD IOMMU


From: Marcel Apfelbaum
Subject: Re: [Qemu-devel] [V6 1/4] hw/i386: Introduce AMD IOMMU
Date: Thu, 3 Mar 2016 11:40:35 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.5.0

On 03/02/2016 06:08 AM, David Kiarie wrote:
On Wed, Mar 2, 2016 at 7:00 AM, David Kiarie <address@hidden> wrote:
On Fri, Feb 26, 2016 at 9:23 AM, David Kiarie <address@hidden> wrote:
On Thu, Feb 25, 2016 at 6:43 PM, Marcel Apfelbaum <address@hidden> wrote:
On 02/21/2016 08:10 PM, David Kiarie wrote:

Add AMD IOMMU emulaton to Qemu in addition to Intel IOMMU
The IOMMU does basic translation, error checking and has a
mininal IOTLB implementation


Hi,


Signed-off-by: David Kiarie <address@hidden>
---
   hw/i386/Makefile.objs |    1 +
   hw/i386/amd_iommu.c   | 1432
+++++++++++++++++++++++++++++++++++++++++++++++++
   hw/i386/amd_iommu.h   |  395 ++++++++++++++
   include/hw/pci/pci.h  |    2 +
   4 files changed, 1830 insertions(+)
   create mode 100644 hw/i386/amd_iommu.c
   create mode 100644 hw/i386/amd_iommu.h


[...]


you return from the if clause so you don't need the else

+        if (!amd_iommu_get_dte(s, devid, entry)) {


is not an error if you did not find the device id?

I get device id from Qemu - so I assume it's correct.

I don't get it, if you assume is correct, why do you use the "if" clause?
If you think the id should be OK. maybe you want to assert here?

Currently it looks like a silent failure.

Thanks,
Marcel



+            goto out;
+        }
+
+        err = amd_iommu_page_walk(as, entry, ret,
+                                  is_write ? IOMMU_PERM_WRITE :
IOMMU_PERM_READ,
+                                  addr);
+        if (err) {
+            IOMMU_DPRINTF(MMU, "error: hardware error accessing page
tables"
+                          " while translating addr 0x%"PRIx64, addr);
+            amd_iommu_log_pagetab_error(s, as->devfn, addr, 0);
+            goto out;
+        }
+
+        amd_iommu_update_iotlb(s, as->devfn, addr, ret->translated_addr,
+                               ret->perm, entry[1] &
IOMMU_DEV_DOMID_ID_MASK);
+        return;
+    }
+
+out:
+    ret->iova = addr;
+    ret->translated_addr = addr & IOMMU_PAGE_MASK_4K;
+    ret->addr_mask = ~IOMMU_PAGE_MASK_4K;
+    ret->perm = IOMMU_RW;
+    return;


you don't need the above return

+}
+
+static IOMMUTLBEntry amd_iommu_translate(MemoryRegion *iommu, hwaddr
addr,
+                                         bool is_write)
+{
+    IOMMU_DPRINTF(GENERAL, "");
+
+    AMDIOMMUAddressSpace *as = container_of(iommu, AMDIOMMUAddressSpace,
iommu);
+    AMDIOMMUState *s = as->iommu_state;
+
+    IOMMUTLBEntry ret = {
+        .target_as = &address_space_memory,
+        .iova = addr,
+        .translated_addr = 0,
+        .addr_mask = ~(hwaddr)0,
+        .perm = IOMMU_NONE,
+    };
+
+    if (!s->enabled) {
+        /* IOMMU disabled - corresponds to iommu=off not
+         * failure to provide any parameter
+         */
+        ret.iova = addr & IOMMU_PAGE_MASK_4K;
+        ret.translated_addr = addr & IOMMU_PAGE_MASK_4K;
+        ret.addr_mask = ~IOMMU_PAGE_MASK_4K;
+        ret.perm = IOMMU_RW;
+        return ret;
+    }
+
+    amd_iommu_do_translate(as, addr, is_write, &ret);
+    IOMMU_DPRINTF(MMU, "devid: %02x:%02x.%x gpa 0x%"PRIx64 " hpa
0x%"PRIx64,
+                  as->bus_num, PCI_SLOT(as->devfn), PCI_FUNC(as->devfn),
addr,
+                  ret.translated_addr);
+
+    return ret;
+}
+
+static const MemoryRegionOps mmio_mem_ops = {
+    .read = amd_iommu_mmio_read,
+    .write = amd_iommu_mmio_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+        .unaligned = false,
+    },
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    }
+};
+
+static void amd_iommu_init(AMDIOMMUState *s)
+{
+    printf("amd_iommu_init");


you should use the debug macro here

+
+    amd_iommu_iotlb_reset(s);
+
+    s->iommu_ops.translate = amd_iommu_translate;
+
+    s->devtab_len = 0;
+    s->cmdbuf_len = 0;
+    s->cmdbuf_head = 0;
+    s->cmdbuf_tail = 0;
+    s->evtlog_head = 0;
+    s->evtlog_tail = 0;
+    s->excl_enabled = false;
+    s->excl_allow = false;
+    s->mmio_enabled = false;
+    s->enabled = false;
+    s->ats_enabled = false;
+    s->cmdbuf_enabled = false;
+
+    /* reset MMIO */
+    memset(s->mmior, 0, IOMMU_MMIO_SIZE);
+    amd_iommu_set_quad(s, IOMMU_MMIO_EXT_FEATURES, IOMMU_EXT_FEATURES,
+            0xffffffffffffffef, 0);
+    amd_iommu_set_quad(s, IOMMU_MMIO_STATUS, 0, 0x98, 0x67);
+    /* reset device ident */
+    pci_config_set_vendor_id(s->dev.config, PCI_VENDOR_ID_AMD);
+    pci_config_set_device_id(s->dev.config, PCI_DEVICE_ID_RD890_IOMMU);
+    pci_config_set_prog_interface(s->dev.config, 00);
+    pci_config_set_class(s->dev.config, 0x0806);
+
+    /* reset IOMMU specific capabilities  */
+    pci_set_long(s->dev.config + s->capab_offset, IOMMU_CAPAB_FEATURES);
+    pci_set_long(s->dev.config + s->capab_offset + IOMMU_CAPAB_BAR_LOW,
+                 s->mmio.addr & ~(0xffff0000));
+    pci_set_long(s->dev.config + s->capab_offset + IOMMU_CAPAB_BAR_HIGH,
+                (s->mmio.addr & ~(0xffff)) >> 16);
+    pci_set_long(s->dev.config + s->capab_offset + IOMMU_CAPAB_RANGE,
+                 0xff000000);
+    pci_set_long(s->dev.config + s->capab_offset + IOMMU_CAPAB_MISC, 0);
+    pci_set_long(s->dev.config + s->capab_offset + IOMMU_CAPAB_MISC,
+            IOMMU_MAX_PH_ADDR | IOMMU_MAX_GVA_ADDR | IOMMU_MAX_VA_ADDR);


All the capabilities are read-write? Otherwise you need to set the wmask
to indicate what fields are writable.

+}
+
+static void amd_iommu_reset(DeviceState *dev)
+{
+    AMDIOMMUState *s = AMD_IOMMU_DEVICE(dev);
+
+    amd_iommu_init(s);
+}
+
+static void amd_iommu_realize(PCIDevice *dev, Error **error)
+{
+    AMDIOMMUState *s = container_of(dev, AMDIOMMUState, dev);
+
+    s->iotlb = g_hash_table_new_full(amd_iommu_uint64_hash,
+                                     amd_iommu_uint64_equal, g_free,
g_free);
+
+    s->capab_offset = pci_add_capability(dev, IOMMU_CAPAB_ID_SEC, 0,
+                                         IOMMU_CAPAB_SIZE);
+
+    /* add msi and hypertransport capabilities */
+    pci_add_capability(&s->dev, PCI_CAP_ID_MSI, 0, IOMMU_CAPAB_REG_SIZE);
+    pci_add_capability(&s->dev, PCI_CAP_ID_HT, 0, IOMMU_CAPAB_REG_SIZE);
+
+    amd_iommu_init(s);
+
+    /* set up MMIO */
+    memory_region_init_io(&s->mmio, OBJECT(s), &mmio_mem_ops, s, "mmio",
+                          IOMMU_MMIO_SIZE);
+
+    if (s->mmio.addr == IOMMU_BASE_ADDR) {


I don't understand why is need here. realize is called only once in the init
process
and you set it a few lines below.

+        return;
+    }
+
+    s->mmio.addr = IOMMU_BASE_ADDR;
+    memory_region_add_subregion(get_system_memory(), IOMMU_BASE_ADDR,
&s->mmio);
+}
+
+static const VMStateDescription vmstate_amd_iommu = {
+    .name = "amd-iommu",
+    .fields  = (VMStateField[]) {
+        VMSTATE_PCI_DEVICE(dev, AMDIOMMUState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static Property amd_iommu_properties[] = {
+    DEFINE_PROP_UINT32("version", AMDIOMMUState, version, 2),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void amd_iommu_uninit(PCIDevice *dev)
+{
+    AMDIOMMUState *s = container_of(dev, AMDIOMMUState, dev);
+    amd_iommu_iotlb_reset(s);


at this point you also need to clean also the memory regions you use.

+}
+
+static void amd_iommu_class_init(ObjectClass *klass, void* data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->realize = amd_iommu_realize;
+    k->exit = amd_iommu_uninit;
+
+    dc->reset = amd_iommu_reset;
+    dc->vmsd = &vmstate_amd_iommu;
+    dc->props = amd_iommu_properties;
+}
+
+static const TypeInfo amd_iommu = {
+    .name = TYPE_AMD_IOMMU_DEVICE,
+    .parent = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(AMDIOMMUState),
+    .class_init = amd_iommu_class_init
+};
+
+static void amd_iommu_register_types(void)
+{
+    type_register_static(&amd_iommu);
+}
+
+type_init(amd_iommu_register_types);
diff --git a/hw/i386/amd_iommu.h b/hw/i386/amd_iommu.h
new file mode 100644
index 0000000..7d317e1
--- /dev/null
+++ b/hw/i386/amd_iommu.h
@@ -0,0 +1,395 @@
+/*
+ * QEMU emulation of an AMD IOMMU (AMD-Vi)
+ *
+ * Copyright (C) 2011 Eduard - Gabriel Munteanu
+ * Copyright (C) 2015 David Kiarie, <address@hidden>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef AMD_IOMMU_H_
+#define AMD_IOMMU_H_
+
+#include "hw/hw.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/msi.h"
+#include "hw/sysbus.h"
+#include "sysemu/dma.h"
+
+/* Capability registers */
+#define IOMMU_CAPAB_HEADER            0x00
+#define   IOMMU_CAPAB_REV_TYPE        0x02
+#define   IOMMU_CAPAB_FLAGS           0x03
+#define IOMMU_CAPAB_BAR_LOW           0x04
+#define IOMMU_CAPAB_BAR_HIGH          0x08
+#define IOMMU_CAPAB_RANGE             0x0C
+#define IOMMU_CAPAB_MISC              0x10
+#define IOMMU_CAPAB_MISC1             0x14
+
+#define IOMMU_CAPAB_SIZE              0x18
+#define IOMMU_CAPAB_REG_SIZE          0x04
+
+/* Capability header data */
+#define IOMMU_CAPAB_ID_SEC            0xf
+#define IOMMU_CAPAB_FLAT_EXT          (1 << 28)
+#define IOMMU_CAPAB_EFR_SUP           (1 << 27)
+#define IOMMU_CAPAB_FLAG_NPCACHE      (1 << 26)
+#define IOMMU_CAPAB_FLAG_HTTUNNEL     (1 << 25)
+#define IOMMU_CAPAB_FLAG_IOTLBSUP     (1 << 24)
+#define IOMMU_CAPAB_INIT_REV          (1 << 19)
+#define IOMMU_CAPAB_INIT_TYPE         (3 << 16)
+#define IOMMU_CAPAB_INIT_REV_TYPE     (IOMMU_CAPAB_REV |
IOMMU_CAPAB_TYPE)
+#define IOMMU_CAPAB_INIT_FLAGS        (IOMMU_CAPAB_FLAG_NPCACHE | \
+                                       IOMMU_CAPAB_FLAG_HTTUNNEL)
+#define IOMMU_CAPAB_INIT_MISC         ((64 << 15) | (48 << 8))
+#define IOMMU_CAPAB_BAR_MASK          (~((1UL << 14) - 1))
+
+/* MMIO registers */
+#define IOMMU_MMIO_DEVICE_TABLE       0x0000
+#define IOMMU_MMIO_COMMAND_BASE       0x0008
+#define IOMMU_MMIO_EVENT_BASE         0x0010
+#define IOMMU_MMIO_CONTROL            0x0018
+#define IOMMU_MMIO_EXCL_BASE          0x0020
+#define IOMMU_MMIO_EXCL_LIMIT         0x0028
+#define IOMMU_MMIO_EXT_FEATURES       0x0030
+#define IOMMU_MMIO_COMMAND_HEAD       0x2000
+#define IOMMU_MMIO_COMMAND_TAIL       0x2008
+#define IOMMU_MMIO_EVENT_HEAD         0x2010
+#define IOMMU_MMIO_EVENT_TAIL         0x2018
+#define IOMMU_MMIO_STATUS             0x2020
+#define IOMMU_MMIO_PPR_BASE           0x0038
+#define IOMMU_MMIO_PPR_HEAD           0x2030
+#define IOMMU_MMIO_PPR_TAIL           0x2038
+
+#define IOMMU_MMIO_SIZE               0x4000
+
+#define IOMMU_MMIO_DEVTAB_SIZE_MASK   ((1ULL << 12) - 1)
+#define IOMMU_MMIO_DEVTAB_BASE_MASK   (((1ULL << 52) - 1) & ~ \
+                                       IOMMU_MMIO_DEVTAB_SIZE_MASK)
+#define IOMMU_MMIO_DEVTAB_ENTRY_SIZE  32
+#define IOMMU_MMIO_DEVTAB_SIZE_UNIT   4096
+
+/* some of this are similar but just for readability */
+#define IOMMU_MMIO_CMDBUF_SIZE_BYTE       (IOMMU_MMIO_COMMAND_BASE + 7)
+#define IOMMU_MMIO_CMDBUF_SIZE_MASK       0x0F
+#define IOMMU_MMIO_CMDBUF_BASE_MASK       IOMMU_MMIO_DEVTAB_BASE_MASK
+#define IOMMU_MMIO_CMDBUF_DEFAULT_SIZE    8
+#define IOMMU_MMIO_CMDBUF_HEAD_MASK       (((1ULL << 19) - 1) & ~0x0F)
+#define IOMMU_MMIO_CMDBUF_TAIL_MASK       IOMMU_MMIO_EVTLOG_HEAD_MASK
+
+#define IOMMU_MMIO_EVTLOG_SIZE_BYTE       (IOMMU_MMIO_EVENT_BASE + 7)
+#define IOMMU_MMIO_EVTLOG_SIZE_MASK       IOMMU_MMIO_CMDBUF_SIZE_MASK
+#define IOMMU_MMIO_EVTLOG_BASE_MASK       IOMMU_MMIO_CMDBUF_BASE_MASK
+#define IOMMU_MMIO_EVTLOG_DEFAULT_SIZE    IOMMU_MMIO_CMDBUF_DEFAULT_SIZE
+#define IOMMU_MMIO_EVTLOG_HEAD_MASK       (((1ULL << 19) - 1) & ~0x0F)
+#define IOMMU_MMIO_EVTLOG_TAIL_MASK       IOMMU_MMIO_EVTLOG_HEAD_MASK
+
+#define IOMMU_MMIO_PPRLOG_SIZE_BYTE       (IOMMU_MMIO_EVENT_BASE + 7)
+#define IOMMU_MMIO_PPRLOG_HEAD_MASK       IOMMU_MMIO_EVTLOG_HEAD_MASK
+#define IOMMU_MMIO_PPRLOG_TAIL_MASK       IOMMU_MMIO_EVTLOG_HEAD_MASK
+#define IOMMU_MMIO_PPRLOG_BASE_MASK       IOMMU_MMIO_EVTLOG_BASE_MASK
+#define IOMMU_MMIO_PPRLOG_SIZE_MASK       IOMMU_MMIO_EVTLOG_SIZE_MASK
+
+#define IOMMU_MMIO_EXCL_BASE_MASK         IOMMU_MMIO_DEVTAB_BASE_MASK
+#define IOMMU_MMIO_EXCL_ENABLED_MASK      (1ULL << 0)
+#define IOMMU_MMIO_EXCL_ALLOW_MASK        (1ULL << 1)
+#define IOMMU_MMIO_EXCL_LIMIT_MASK        IOMMU_MMIO_DEVTAB_BASE_MASK
+#define IOMMU_MMIO_EXCL_LIMIT_LOW         0xFFF
+
+/* mmio control register flags */
+#define IOMMU_MMIO_CONTROL_IOMMUEN        (1ULL << 0)
+#define IOMMU_MMIO_CONTROL_HTTUNEN        (1ULL << 1)
+#define IOMMU_MMIO_CONTROL_EVENTLOGEN     (1ULL << 2)
+#define IOMMU_MMIO_CONTROL_EVENTINTEN     (1ULL << 3)
+#define IOMMU_MMIO_CONTROL_COMWAITINTEN   (1ULL << 4)
+#define IOMMU_MMIO_CONTROL_PASSPW         (1ULL << 7)
+#define IOMMU_MMIO_CONTROL_REPASSPW       (1ULL << 9)
+#define IOMMU_MMIO_CONTROL_COHERENT       (1ULL << 10)
+#define IOMMU_MMIO_CONTROL_ISOC           (1ULL << 11)
+#define IOMMU_MMIO_CONTROL_CMDBUFLEN      (1ULL << 12)
+#define IOMMU_MMIO_CONTROL_PPRLOGEN       (1ULL << 13)
+#define IOMMU_MMIO_CONTROL_PPRINTEN       (1ULL << 14)
+#define IOMMU_MMIO_CONTROL_PPREN          (1ULL << 15)
+#define IOMMU_MMIO_CONTROL_GAEN           (1ULL << 16)
+#define IOMMU_MMIO_CONTROL_GTEN           (1ULL << 17)
+
+/* MMIO status register bits */
+#define IOMMU_MMIO_STATUS_PPR_OVFE    (1 << 18)
+#define IOMMU_MMIO_STATUS_PPR_OVFEB   (1 << 17)
+#define IOMMU_MMIO_STATUS_EVT_ACTIVE  (1 << 16)
+#define IOMMU_MMIO_STATUS_EVT_OVFB    (1 << 15)
+#define IOMMU_MMIO_STATUS_PPR_ACTIVE  (1 << 12)
+#define IOMMU_MMIO_STATUS_PPR_OVFB    (1 << 11)
+#define IOMMU_MMIO_STATUS_GA_INT      (1 << 10)
+#define IOMMU_MMIO_STATUS_GA_RUN      (1 << 9)
+#define IOMMU_MMIO_STATUS_GA_OVF      (1 << 8)
+#define IOMMU_MMIO_STATUS_PPR_RUN     (1 << 7)
+#define IOMMU_MMIO_STATUS_PPR_INT     (1 << 6)
+#define IOMMU_MMIO_STATUS_PPR_OVF     (1 << 5)
+#define IOMMU_MMIO_STATUS_CMDBUF_RUN  (1 << 4)
+#define IOMMU_MMIO_STATUS_EVT_RUN     (1 << 3)
+#define IOMMU_MMIO_STATUS_COMP_INT    (1 << 2)
+#define IOMMU_MMIO_STATUS_EVT_INT     (1 << 1)
+#define IOMMU_MMIO_STATUS_EVT_OVF     (1 << 0)
+
+#define IOMMU_CMDBUF_ID_BYTE              0x07
+#define IOMMU_CMDBUF_ID_RSHIFT            4
+
+#define IOMMU_CMD_COMPLETION_WAIT         0x01
+#define IOMMU_CMD_INVAL_DEVTAB_ENTRY      0x02
+#define IOMMU_CMD_INVAL_IOMMU_PAGES       0x03
+#define IOMMU_CMD_INVAL_IOTLB_PAGES       0x04
+#define IOMMU_CMD_INVAL_INTR_TABLE        0x05
+#define IOMMU_CMD_PREFETCH_IOMMU_PAGES    0x06
+#define IOMMU_CMD_COMPLETE_PPR_REQUEST    0x07
+#define IOMMU_CMD_INVAL_IOMMU_ALL         0x08
+
+#define IOMMU_DEVTAB_ENTRY_SIZE           32
+
+/* Device table entry bits 0:63 */
+#define IOMMU_DEV_VALID                   (1ULL << 0)
+#define IOMMU_DEV_TRANSLATION_VALID       (1ULL << 1)
+#define IOMMU_DEV_MODE_MASK               0x7
+#define IOMMU_DEV_MODE_RSHIFT             9
+#define IOMMU_DEV_PT_ROOT_MASK            0xFFFFFFFFFF000
+#define IOMMU_DEV_PT_ROOT_RSHIFT          12
+#define IOMMU_DEV_PERM_SHIFT              61
+#define IOMMU_DEV_PERM_READ               (1ULL << 61)
+#define IOMMU_DEV_PERM_WRITE              (1ULL << 62)
+
+/* Device table entry bits 64:127 */
+#define IOMMU_DEV_DOMID_ID_MASK          ((1ULL << 16) - 1)
+#define IOMMU_DEV_IOTLB_SUPPORT           (1ULL << 17)
+#define IOMMU_DEV_SUPPRESS_PF             (1ULL << 18)
+#define IOMMU_DEV_SUPPRESS_ALL_PF         (1ULL << 19)
+#define IOMMU_DEV_IOCTL_MASK              (~3)
+#define IOMMU_DEV_IOCTL_RSHIFT            20
+#define   IOMMU_DEV_IOCTL_DENY            0
+#define   IOMMU_DEV_IOCTL_PASSTHROUGH     1
+#define   IOMMU_DEV_IOCTL_TRANSLATE       2
+#define IOMMU_DEV_CACHE                   (1ULL << 37)
+#define IOMMU_DEV_SNOOP_DISABLE           (1ULL << 38)
+#define IOMMU_DEV_EXCL                    (1ULL << 39)
+
+/* Event codes and flags, as stored in the info field */
+#define IOMMU_EVENT_ILLEGAL_DEVTAB_ENTRY  (0x1U << 12)
+#define IOMMU_EVENT_IOPF                  (0x2U << 12)
+#define   IOMMU_EVENT_IOPF_I              (1U << 3)
+#define   IOMMU_EVENT_IOPF_PR             (1U << 4)
+#define   IOMMU_EVENT_IOPF_RW             (1U << 5)
+#define   IOMMU_EVENT_IOPF_PE             (1U << 6)
+#define   IOMMU_EVENT_IOPF_RZ             (1U << 7)
+#define   IOMMU_EVENT_IOPF_TR             (1U << 8)
+#define IOMMU_EVENT_DEV_TAB_HW_ERROR      (0x3U << 12)
+#define IOMMU_EVENT_PAGE_TAB_HW_ERROR     (0x4U << 12)
+#define IOMMU_EVENT_ILLEGAL_COMMAND_ERROR (0x5U << 12)
+#define IOMMU_EVENT_COMMAND_HW_ERROR      (0x6U << 12)
+#define IOMMU_EVENT_IOTLB_INV_TIMEOUT     (0x7U << 12)
+#define IOMMU_EVENT_INVALID_DEV_REQUEST   (0x8U << 12)
+
+#define IOMMU_EVENT_LEN                   16
+#define IOMMU_PERM_READ             (1 << 0)
+#define IOMMU_PERM_WRITE            (1 << 1)
+#define IOMMU_PERM_RW               (IOMMU_PERM_READ | IOMMU_PERM_WRITE)
+
+/* AMD RD890 Chipset */
+#define PCI_DEVICE_ID_RD890_IOMMU   0x20




We keep the pci ids in include/hw/pci/pci_ids.h

This a dummy device id I use for IOMMU - IOMMU doesn't have a specific
device id. There's a device id on linux include files for a certain
AMD IOMMU but it makes IOMMU seem to be on a non-existant bus so I
don't use it.


+
+#define IOMMU_FEATURE_PREFETCH            (1ULL << 0)
+#define IOMMU_FEATURE_PPR                 (1ULL << 1)
+#define IOMMU_FEATURE_NX                  (1ULL << 3)
+#define IOMMU_FEATURE_GT                  (1ULL << 4)
+#define IOMMU_FEATURE_IA                  (1ULL << 6)
+#define IOMMU_FEATURE_GA                  (1ULL << 7)
+#define IOMMU_FEATURE_HE                  (1ULL << 8)
+#define IOMMU_FEATURE_PC                  (1ULL << 9)
+
+/* reserved DTE bits */
+#define IOMMU_DTE_LOWER_QUAD_RESERVED  0x80300000000000fc
+#define IOMMU_DTE_MIDDLE_QUAD_RESERVED 0x0000000000000100
+#define IOMMU_DTE_UPPER_QUAD_RESERVED  0x08f0000000000000
+
+/* IOMMU paging mode */
+#define IOMMU_GATS_MODE                 (6ULL <<  12)
+#define IOMMU_HATS_MODE                 (6ULL <<  10)
+
+/* PCI SIG constants */
+#define PCI_BUS_MAX 256
+#define PCI_SLOT_MAX 32
+#define PCI_FUNC_MAX 8
+#define PCI_DEVFN_MAX 256


Maybe we can move the PCI macros to include/hw/pci/pci.h, those are not
IOMMU specific.

Yeah, this are PCI macros but they are a not copied from linux while
the macros in pci.h seem to have been copied from linux.


+
+/* IOTLB */
+#define IOMMU_IOTLB_MAX_SIZE 1024
+#define IOMMU_DEVID_SHIFT    36
+
+/* extended feature support */
+#define IOMMU_EXT_FEATURES (IOMMU_FEATURE_PREFETCH | IOMMU_FEATURE_PPR |
\
+        IOMMU_FEATURE_NX | IOMMU_FEATURE_IA | IOMMU_FEATURE_GT | \
+        IOMMU_FEATURE_GA | IOMMU_FEATURE_HE | IOMMU_GATS_MODE | \
+        IOMMU_HATS_MODE)
+
+/* capabilities header */
+#define IOMMU_CAPAB_FEATURES (IOMMU_CAPAB_FLAT_EXT | \
+        IOMMU_CAPAB_FLAG_NPCACHE | IOMMU_CAPAB_FLAG_IOTLBSUP \
+        | IOMMU_CAPAB_ID_SEC | IOMMU_CAPAB_INIT_TYPE | \
+        IOMMU_CAPAB_FLAG_HTTUNNEL |  IOMMU_CAPAB_EFR_SUP)
+
+/* command constants */
+#define IOMMU_COM_STORE_ADDRESS_MASK 0xffffffffffff8
+#define IOMMU_COM_COMPLETION_STORE_MASK 0x1
+#define IOMMU_COM_COMPLETION_INTR 0x2
+#define IOMMU_COM_COMPLETION_DATA_OFF 0x8
+#define IOMMU_COMMAND_SIZE 0x10
+
+/* IOMMU default address */
+#define IOMMU_BASE_ADDR 0xfed80000
+
+/* page management constants */
+#define IOMMU_PAGE_SHIFT 12
+#define IOMMU_PAGE_SIZE  (1ULL << IOMMU_PAGE_SHIFT)
+
+#define IOMMU_PAGE_SHIFT_4K 12
+#define IOMMU_PAGE_MASK_4K  (~((1ULL << IOMMU_PAGE_SHIFT_4K) - 1))
+#define IOMMU_PAGE_SHIFT_2M 21
+#define IOMMU_PAGE_MASK_2M  (~((1ULL << IOMMU_PAGE_SHIFT_2M) - 1))
+#define IOMMU_PAGE_SHIFT_1G 30
+#define IOMMU_PAGE_MASK_1G (~((1ULL << IOMMU_PAGE_SHIFT_1G) - 1))
+
+#define IOMMU_MAX_VA_ADDR          (48UL << 5)
+#define IOMMU_MAX_PH_ADDR          (40UL << 8)
+#define IOMMU_MAX_GVA_ADDR         (48UL << 15)
+
+/* invalidation command device id */
+#define IOMMU_INVAL_DEV_ID_SHIFT  32
+#define IOMMU_INVAL_DEV_ID_MASK   (~((1UL << IOMMU_INVAL_DEV_ID_SHIFT) -
1))




reply via email to

[Prev in Thread] Current Thread [Next in Thread]