[Qemu-devel] [PATCH 3/3] ide: really restart pending and in-flight atapi dma

[Denis V. Lunev]

From: Pavel Butsykin <address@hidden>

Restart of ATAPI DMA used to be unreachable, because the request to do
so wasn't indicated in bus->error_status due to the lack of spare bits, and
ide_restart_bh() would return early doing nothing.

This patch makes use of the observation that not all bit combinations were
possible in ->error_status. In particular, IDE_RETRY_READ only made sense
together with IDE_RETRY_DMA or IDE_RETRY_PIO. This allows to re-use
IDE_RETRY_READ alone as an indicator of ATAPI DMA restart request.

As a means against confusion, macros are added to test the state of
->error_status.

The patch fixes the restart of both in-flight and pending ATAPI DMA,
following the scheme similar to that of IDE DMA.

Signed-off-by: Pavel Butsykin <address@hidden>
Reviewed-by: Roman Kagan <address@hidden>
Signed-off-by: Denis V. Lunev <address@hidden>
CC: John Snow <address@hidden>
---
 hw/ide/atapi.c    | 15 +++++++--------
 hw/ide/core.c     | 23 ++++++++++-------------
 hw/ide/internal.h | 18 ++++++++++++++++++
 3 files changed, 35 insertions(+), 21 deletions(-)

diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index 8816b38..0d51b44 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -375,22 +375,25 @@ static void ide_atapi_cmd_check_status(IDEState *s)
 }
 /* ATAPI DMA support */
 
-/* XXX: handle read errors */
 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
 {
     IDEState *s = opaque;
     int data_offset, n;
 
-    if (ret < 0) { /* XXX: handle -ESTATESAVE for migration */
+    if (ret < 0) {
         if (ret == -ESTATESAVE) {
             /*
              * This case is not really an error
              * but a request to save the state.
              */
+            s->bus->error_status = IDE_RETRY_ATAPI;
             return;
+        } else if (ide_handle_rw_error(s, -ret, IDE_RETRY_ATAPI)) {
+            if (s->bus->error_status) {
+                return;
+            }
+            goto eot;
         }
-        ide_atapi_io_error(s, ret);
-        goto eot;
     }
 
     if (s->io_buffer_size > 0) {
@@ -488,10 +491,6 @@ static void ide_atapi_cmd_read(IDEState *s, int lba, int 
nb_sectors,
     }
 }
 
-
-/* Called by *_restart_bh when the transfer function points
- * to ide_atapi_cmd
- */
 void ide_atapi_dma_restart(IDEState *s)
 {
     /*
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 872e11f..6d7533f 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -56,7 +56,6 @@ static const int smart_attributes[][12] = {
     { 190,  0x03, 0x00, 0x45, 0x45, 0x1f, 0x00, 0x1f, 0x1f, 0x00, 0x00, 0x32},
 };
 
-static int ide_handle_rw_error(IDEState *s, int error, int op);
 static void ide_dummy_transfer_stop(IDEState *s);
 
 static void padstr(char *str, const char *src, int len)
@@ -772,7 +771,7 @@ void ide_dma_error(IDEState *s)
     ide_set_irq(s->bus);
 }
 
-static int ide_handle_rw_error(IDEState *s, int error, int op)
+int ide_handle_rw_error(IDEState *s, int error, int op)
 {
     bool is_read = (op & IDE_RETRY_READ) != 0;
     BlockErrorAction action = blk_get_error_action(s->blk, is_read, error);
@@ -782,8 +781,10 @@ static int ide_handle_rw_error(IDEState *s, int error, int 
op)
         s->bus->error_status = op;
     } else if (action == BLOCK_ERROR_ACTION_REPORT) {
         block_acct_failed(blk_get_stats(s->blk), &s->acct);
-        if (op & IDE_RETRY_DMA) {
+        if (IS_IDE_RETRY_DMA(op)) {
             ide_dma_error(s);
+        } else if (IS_IDE_RETRY_ATAPI(op)) {
+            ide_atapi_io_error(s, -error);
         } else {
             ide_rw_error(s);
         }
@@ -2533,13 +2534,13 @@ static void ide_restart_bh(void *opaque)
         }
     }
 
-    if (error_status & IDE_RETRY_DMA) {
+    if (IS_IDE_RETRY_DMA(error_status)) {
         if (error_status & IDE_RETRY_TRIM) {
             ide_restart_dma(s, IDE_DMA_TRIM);
         } else {
             ide_restart_dma(s, is_read ? IDE_DMA_READ : IDE_DMA_WRITE);
         }
-    } else if (error_status & IDE_RETRY_PIO) {
+    } else if (IS_IDE_RETRY_PIO(error_status)) {
         if (is_read) {
             ide_sector_read(s);
         } else {
@@ -2547,15 +2548,11 @@ static void ide_restart_bh(void *opaque)
         }
     } else if (error_status & IDE_RETRY_FLUSH) {
         ide_flush_cache(s);
+    } else if (IS_IDE_RETRY_ATAPI(error_status)) {
+        assert(s->end_transfer_func == ide_atapi_cmd);
+        ide_atapi_dma_restart(s);
     } else {
-        /*
-         * We've not got any bits to tell us about ATAPI - but
-         * we do have the end_transfer_func that tells us what
-         * we're trying to do.
-         */
-        if (s->end_transfer_func == ide_atapi_cmd) {
-            ide_atapi_dma_restart(s);
-        }
+        abort();
     }
 }
 
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index dcd8627..2e845d0 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -508,11 +508,27 @@ struct IDEDevice {
 /* These are used for the error_status field of IDEBus */
 #define IDE_RETRY_DMA  0x08
 #define IDE_RETRY_PIO  0x10
+#define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */
 #define IDE_RETRY_READ  0x20
 #define IDE_RETRY_FLUSH 0x40
 #define IDE_RETRY_TRIM 0x80
 #define IDE_RETRY_HBA  0x100
 
+#define IS_IDE_RETRY_DMA(_status) \
+    ((_status) & IDE_RETRY_DMA)
+
+#define IS_IDE_RETRY_PIO(_status) \
+    ((_status) & IDE_RETRY_PIO)
+
+/*
+ * The method of the IDE_RETRY_ATAPI determination is to use a previously
+ * impossible bit combination as a new status value.
+ */
+#define IS_IDE_RETRY_ATAPI(_status)   \
+    (((_status) & IDE_RETRY_ATAPI) && \
+     !IS_IDE_RETRY_DMA(_status) &&    \
+     !IS_IDE_RETRY_PIO(_status))
+
 /*
  * a code to trigger entering error path and save/restore the "ready to DMA"
  * state just like DMA-ing state. (Ab)use EINPROGRESS as it's not supposed to
@@ -604,4 +620,6 @@ void ide_bus_new(IDEBus *idebus, size_t idebus_size, 
DeviceState *dev,
                  int bus_id, int max_units);
 IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
 
+int ide_handle_rw_error(IDEState *s, int error, int op);
+
 #endif /* HW_IDE_INTERNAL_H */
-- 
2.1.4