Re: [Qemu-devel] [Qemu-block] [PATCH for-2.6 2/2] block/gluster: prevent data loss after i/o error

[Kevin Wolf]

Am 06.04.2016 um 15:10 hat Jeff Cody geschrieben:
> On Wed, Apr 06, 2016 at 01:51:59PM +0200, Kevin Wolf wrote:
> > Am 06.04.2016 um 13:41 hat Kevin Wolf geschrieben:
> > > Am 06.04.2016 um 13:19 hat Ric Wheeler geschrieben:
> > > > 
> > > > We had a thread discussing this not on the upstream list.
> > > > 
> > > > My summary of the thread is that I don't understand why gluster
> > > > should drop cached data after a failed fsync() for any open file.
> > > 
> > > It certainly shouldn't, but it does by default. :-)
> > > 
> > > Have a look at commit 3fcead2d in glusterfs.git, which at least
> > > introduces an option to get usable behaviour:
> > > 
> > >     { .key = {"resync-failed-syncs-after-fsync"},
> > >       .type = GF_OPTION_TYPE_BOOL,
> > >       .default_value = "off",
> > >       .description = "If sync of \"cached-writes issued before fsync\" "
> > >                      "(to backend) fails, this option configures whether "
> > >                      "to retry syncing them after fsync or forget them. "
> > >                      "If set to on, cached-writes are retried "
> > >                      "till a \"flush\" fop (or a successful sync) on sync 
> > > "
> > >                      "failures. "
> > >                      "fsync itself is failed irrespective of the value of 
> > > "
> > >                      "this option. ",
> > >     },
> > > 
> > > As you can see, the default is still to drop cached data, and this is
> > > with the file still opened. qemu needs to make sure that this option is
> > > set, and if Jeff's comment in the code below is right, there is no way
> > > currently to make sure that the option isn't silently ignored.
> > > 
> > > Can we get some function that sets an option and fails if the option is
> > > unknown? Or one that queries the state after setting an option, so we
> > > can check whether we succeeded in switching to the mode we need?
> > > 
> > > > For closed files, I think it might still happen but this is the same
> > > > as any file system (and unlikely to be the case for qemu?).
> > > 
> > > Our problem is only with open images. Dropping caches for files that
> > > qemu doesn't use any more is fine as far as I'm concerned.
> > > 
> > > Note that our usage can involve cases where we reopen a file with
> > > different flags, i.e. first open a second file descriptor, then close
> > > the first one. The image was never completely closed here and we would
> > > still want the cache to preserve our data in such cases.
> > 
> > Hm, actually, maybe we should just call bdrv_flush() before reopening an
> > image, and if an error is returned, we abort the reopen. It's far from
> > being a hot path, so the overhead of a flush shouldn't matter, and it
> > seems we're taking an unnecessary risk without doing this.
> >
> 
> [I seemed to have been dropped from the cc]
> 
> Are you talking about doing a bdrv_flush() on the new descriptor (i.e.
> reop_s->glfs)?  Because otherwise, we already do this in
> bdrv_reopen_prepare() on the original fd.  It happens right before the call
> to drv->bdrv_reopen_prepare():
> 
> 
> 2020     ret = bdrv_flush(reopen_state->bs);
> 2021     if (ret) {
> 2022         error_setg_errno(errp, -ret, "Error flushing drive");
> 2023         goto error;
> 2024     }
> 2025 
> 2026     if (drv->bdrv_reopen_prepare) {
> 2027         ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);

Ah, thanks. Yes, this is what I meant. I expected it somewhere close to
the bdrv_drain_all() call, so I missed the call you quoted. So that's
good news, at least this part of the problem doesn't exist then. :-)

Kevin

> > 
> > > > I will note that Linux in general had (still has I think?) the
> > > > behavior that once the process closes a file (or exits), we lose
> > > > context to return an error to. From that point on, any failed IO
> > > > from the page cache to the target disk will be dropped from cache.
> > > > To hold things in the cache would lead it to fill with old data that
> > > > is not really recoverable and we have no good way to know that the
> > > > situation is repairable and how long that might take. Upstream
> > > > kernel people have debated this, the behavior might be tweaked for
> > > > certain types of errors.
> > > 
> > > That's fine, we just don't want the next fsync() to signal success when
> > > in reality the cache has thrown away our data. As soon as we close the
> > > image, there is no next fsync(), so you can do whatever you like.
> > > 
> > > Kevin
> > > 
> > > > On 04/06/2016 07:02 AM, Kevin Wolf wrote:
> > > > >[ Adding some CCs ]
> > > > >
> > > > >Am 06.04.2016 um 05:29 hat Jeff Cody geschrieben:
> > > > >>Upon receiving an I/O error after an fsync, by default gluster will
> > > > >>dump its cache.  However, QEMU will retry the fsync, which is 
> > > > >>especially
> > > > >>useful when encountering errors such as ENOSPC when using the 
> > > > >>werror=stop
> > > > >>option.  When using caching with gluster, however, the last written 
> > > > >>data
> > > > >>will be lost upon encountering ENOSPC.  Using the cache xlator option 
> > > > >>of
> > > > >>'resync-failed-syncs-after-fsync' should cause gluster to retain the
> > > > >>cached data after a failed fsync, so that ENOSPC and other transient
> > > > >>errors are recoverable.
> > > > >>
> > > > >>Signed-off-by: Jeff Cody <address@hidden>
> > > > >>---
> > > > >>  block/gluster.c | 27 +++++++++++++++++++++++++++
> > > > >>  configure       |  8 ++++++++
> > > > >>  2 files changed, 35 insertions(+)
> > > > >>
> > > > >>diff --git a/block/gluster.c b/block/gluster.c
> > > > >>index 30a827e..b1cf71b 100644
> > > > >>--- a/block/gluster.c
> > > > >>+++ b/block/gluster.c
> > > > >>@@ -330,6 +330,23 @@ static int qemu_gluster_open(BlockDriverState 
> > > > >>*bs,  QDict *options,
> > > > >>          goto out;
> > > > >>      }
> > > > >>+#ifdef CONFIG_GLUSTERFS_XLATOR_OPT
> > > > >>+    /* Without this, if fsync fails for a recoverable reason (for 
> > > > >>instance,
> > > > >>+     * ENOSPC), gluster will dump its cache, preventing retries.  
> > > > >>This means
> > > > >>+     * almost certain data loss.  Not all gluster versions support 
> > > > >>the
> > > > >>+     * 'resync-failed-syncs-after-fsync' key value, but there is no 
> > > > >>way to
> > > > >>+     * discover during runtime if it is supported (this api returns 
> > > > >>success for
> > > > >>+     * unknown key/value pairs) */
> > > > >Honestly, this sucks. There is apparently no way to operate gluster so
> > > > >we can safely recover after a failed fsync. "We hope everything is 
> > > > >fine,
> > > > >but depending on your gluster version, we may now corrupt your image"
> > > > >isn't very good.
> > > > >
> > > > >We need to consider very carefully if this is good enough to go on 
> > > > >after
> > > > >an error. I'm currently leaning towards "no". That is, we should only
> > > > >enable this after Gluster provides us a way to make sure that the 
> > > > >option
> > > > >is really set.
> > > > >
> > > > >>+    ret = glfs_set_xlator_option (s->glfs, "*-write-behind",
> > > > >>+                                           
> > > > >>"resync-failed-syncs-after-fsync",
> > > > >>+                                           "on");
> > > > >>+    if (ret < 0) {
> > > > >>+        error_setg_errno(errp, errno, "Unable to set xlator 
> > > > >>key/value pair");
> > > > >>+        ret = -errno;
> > > > >>+        goto out;
> > > > >>+    }
> > > > >>+#endif
> > > > >We also need to consider the case without CONFIG_GLUSTERFS_XLATOR_OPT.
> > > > >In this case (as well as theoretically in the case that the option
> > > > >didn't take effect - if only we could know about it), a failed
> > > > >glfs_fsync_async() is fatal and we need to stop operating on the image,
> > > > >i.e. set bs->drv = NULL like when we detect corruption in qcow2 images.
> > > > >The guest will see a broken disk that fails all I/O requests, but 
> > > > >that's
> > > > >better than corrupting data.
> > > > >
> > > > >Kevin
> > > > 
> > > 
> >