qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 06/14] mirror: Allow target that already has a Block


From: Kevin Wolf
Subject: [Qemu-devel] [PATCH 06/14] mirror: Allow target that already has a BlockBackend
Date: Wed, 4 May 2016 11:39:17 +0200

We had to forbid mirroring to a target BDS that already had a BB
attached because the node swapping at job completion would add a second
BB and we didn't support multiple BBs on a single BDS at the time. Now
we do, so we can lift the restriction.

As we allow additional BlockBackends for the target, we must expect
other users to be sending requests. There may no requests be in flight
during the graph modification, so we have to drain those users now.

The core part of this patch is a revert of commit 40365552.

Signed-off-by: Kevin Wolf <address@hidden>
---
 block/mirror.c             | 33 ++++++---------------------------
 blockdev.c                 |  4 ----
 tests/qemu-iotests/041     | 27 ---------------------------
 tests/qemu-iotests/041.out |  4 ++--
 4 files changed, 8 insertions(+), 60 deletions(-)

diff --git a/block/mirror.c b/block/mirror.c
index efca8fc..23aa10e 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -20,7 +20,6 @@
 #include "qapi/qmp/qerror.h"
 #include "qemu/ratelimit.h"
 #include "qemu/bitmap.h"
-#include "qemu/error-report.h"
 
 #define SLICE_TIME    100000000ULL /* ns */
 #define MAX_IN_FLIGHT 16
@@ -466,24 +465,20 @@ static void mirror_exit(BlockJob *job, void *opaque)
             to_replace = s->to_replace;
         }
 
-        /* This was checked in mirror_start_job(), but meanwhile one of the
-         * nodes could have been newly attached to a BlockBackend. */
-        if (bdrv_has_blk(to_replace) && bdrv_has_blk(s->target)) {
-            error_report("block job: Can't create node with two 
BlockBackends");
-            data->ret = -EINVAL;
-            goto out;
-        }
-
         if (bdrv_get_flags(s->target) != bdrv_get_flags(to_replace)) {
             bdrv_reopen(s->target, bdrv_get_flags(to_replace), NULL);
         }
+
+        /* The mirror job has no requests in flight any more, but we need to
+         * drain potential other users of the BDS before changing the graph. */
+        bdrv_drained_begin(s->target);
         bdrv_replace_in_backing_chain(to_replace, s->target);
+        bdrv_drained_end(s->target);
+
         /* We just changed the BDS the job BB refers to */
         blk_remove_bs(job->blk);
         blk_insert_bs(job->blk, src);
     }
-
-out:
     if (s->to_replace) {
         bdrv_op_unblock_all(s->to_replace, s->replace_blocker);
         error_free(s->replace_blocker);
@@ -807,7 +802,6 @@ static void mirror_start_job(BlockDriverState *bs, 
BlockDriverState *target,
                              bool is_none_mode, BlockDriverState *base)
 {
     MirrorBlockJob *s;
-    BlockDriverState *replaced_bs;
 
     if (granularity == 0) {
         granularity = bdrv_get_default_bitmap_granularity(target);
@@ -824,21 +818,6 @@ static void mirror_start_job(BlockDriverState *bs, 
BlockDriverState *target,
         buf_size = DEFAULT_MIRROR_BUF_SIZE;
     }
 
-    /* We can't support this case as long as the block layer can't handle
-     * multiple BlockBackends per BlockDriverState. */
-    if (replaces) {
-        replaced_bs = bdrv_lookup_bs(replaces, replaces, errp);
-        if (replaced_bs == NULL) {
-            return;
-        }
-    } else {
-        replaced_bs = bs;
-    }
-    if (bdrv_has_blk(replaced_bs) && bdrv_has_blk(target)) {
-        error_setg(errp, "Can't create node with two BlockBackends");
-        return;
-    }
-
     s = block_job_create(driver, bs, speed, cb, opaque, errp);
     if (!s) {
         return;
diff --git a/blockdev.c b/blockdev.c
index 516c6cb..da9eeff 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -3434,10 +3434,6 @@ static void blockdev_mirror_common(BlockDriverState *bs,
     if (bdrv_op_is_blocked(target, BLOCK_OP_TYPE_MIRROR_TARGET, errp)) {
         return;
     }
-    if (bdrv_has_blk(target)) {
-        error_setg(errp, "Cannot mirror to an attached block device");
-        return;
-    }
 
     if (!bs->backing && sync == MIRROR_SYNC_MODE_TOP) {
         sync = MIRROR_SYNC_MODE_FULL;
diff --git a/tests/qemu-iotests/041 b/tests/qemu-iotests/041
index b1c542f..ed1d9d4 100755
--- a/tests/qemu-iotests/041
+++ b/tests/qemu-iotests/041
@@ -207,33 +207,6 @@ class TestSingleBlockdev(TestSingleDrive):
     test_image_not_found = None
     test_small_buffer2 = None
 
-class TestBlockdevAttached(iotests.QMPTestCase):
-    image_len = 1 * 1024 * 1024 # MB
-
-    def setUp(self):
-        iotests.create_image(backing_img, self.image_len)
-        qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % 
backing_img, test_img)
-        qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % 
backing_img, target_img)
-        self.vm = iotests.VM().add_drive(test_img)
-        self.vm.launch()
-
-    def tearDown(self):
-        self.vm.shutdown()
-        os.remove(test_img)
-        os.remove(target_img)
-
-    def test_blockdev_attached(self):
-        self.assert_no_active_block_jobs()
-        args = {'options':
-                    {'driver': iotests.imgfmt,
-                     'id': 'drive1',
-                     'file': { 'filename': target_img, 'driver': 'file' } } }
-        result = self.vm.qmp("blockdev-add", **args)
-        self.assert_qmp(result, 'return', {})
-        result = self.vm.qmp('blockdev-mirror', device='drive0', sync='full',
-                             target='drive1')
-        self.assert_qmp(result, 'error/class', 'GenericError')
-
 class TestSingleDriveZeroLength(TestSingleDrive):
     image_len = 0
     test_small_buffer2 = None
diff --git a/tests/qemu-iotests/041.out b/tests/qemu-iotests/041.out
index b67d050..b0cadc8 100644
--- a/tests/qemu-iotests/041.out
+++ b/tests/qemu-iotests/041.out
@@ -1,5 +1,5 @@
-............................................................................
+...........................................................................
 ----------------------------------------------------------------------
-Ran 76 tests
+Ran 75 tests
 
 OK
-- 
1.8.3.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]