qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH for-2.7 3/8] libqos: drop duplicated virtio_conf


From: Marc Marí
Subject: Re: [Qemu-devel] [PATCH for-2.7 3/8] libqos: drop duplicated virtio_config.h definitions
Date: Sun, 8 May 2016 20:22:53 +0200

On Mon, 25 Apr 2016 13:46:08 +0100
Stefan Hajnoczi <address@hidden> wrote:

> Signed-off-by: Stefan Hajnoczi <address@hidden>
> ---
>  tests/libqos/virtio.c   | 19 ++++++++++---------
>  tests/libqos/virtio.h   |  9 ---------
>  tests/virtio-blk-test.c |  5 +++--
>  3 files changed, 13 insertions(+), 20 deletions(-)
> 
> diff --git a/tests/libqos/virtio.c b/tests/libqos/virtio.c
> index 613dece..ee9e892 100644
> --- a/tests/libqos/virtio.c
> +++ b/tests/libqos/virtio.c
> @@ -11,6 +11,7 @@
>  #include <glib.h>
>  #include "libqtest.h"
>  #include "libqos/virtio.h"
> +#include "standard-headers/linux/virtio_config.h"
>  
>  uint8_t qvirtio_config_readb(const QVirtioBus *bus, QVirtioDevice *d,
>                                                                  uint64_t
> addr) @@ -55,28 +56,28 @@ QVirtQueue *qvirtqueue_setup(const
> QVirtioBus *bus, QVirtioDevice *d, 
>  void qvirtio_reset(const QVirtioBus *bus, QVirtioDevice *d)
>  {
> -    bus->set_status(d, QVIRTIO_RESET);
> -    g_assert_cmphex(bus->get_status(d), ==, QVIRTIO_RESET);
> +    bus->set_status(d, 0);
> +    g_assert_cmphex(bus->get_status(d), ==, 0);
>  }
>  
>  void qvirtio_set_acknowledge(const QVirtioBus *bus, QVirtioDevice *d)
>  {
> -    bus->set_status(d, bus->get_status(d) | QVIRTIO_ACKNOWLEDGE);
> -    g_assert_cmphex(bus->get_status(d), ==, QVIRTIO_ACKNOWLEDGE);
> +    bus->set_status(d, bus->get_status(d) |
> VIRTIO_CONFIG_S_ACKNOWLEDGE);
> +    g_assert_cmphex(bus->get_status(d), ==,
> VIRTIO_CONFIG_S_ACKNOWLEDGE); }
>  
>  void qvirtio_set_driver(const QVirtioBus *bus, QVirtioDevice *d)
>  {
> -    bus->set_status(d, bus->get_status(d) | QVIRTIO_DRIVER);
> +    bus->set_status(d, bus->get_status(d) | VIRTIO_CONFIG_S_DRIVER);
>      g_assert_cmphex(bus->get_status(d), ==,
> -                                    QVIRTIO_DRIVER |
> QVIRTIO_ACKNOWLEDGE);
> +                    VIRTIO_CONFIG_S_DRIVER |
> VIRTIO_CONFIG_S_ACKNOWLEDGE); }
>  
>  void qvirtio_set_driver_ok(const QVirtioBus *bus, QVirtioDevice *d)
>  {
> -    bus->set_status(d, bus->get_status(d) | QVIRTIO_DRIVER_OK);
> -    g_assert_cmphex(bus->get_status(d), ==,
> -                QVIRTIO_DRIVER_OK | QVIRTIO_DRIVER |
> QVIRTIO_ACKNOWLEDGE);
> +    bus->set_status(d, bus->get_status(d) |
> VIRTIO_CONFIG_S_DRIVER_OK);
> +    g_assert_cmphex(bus->get_status(d), ==,
> VIRTIO_CONFIG_S_DRIVER_OK |
> +                    VIRTIO_CONFIG_S_DRIVER |
> VIRTIO_CONFIG_S_ACKNOWLEDGE); }
>  
>  void qvirtio_wait_queue_isr(const QVirtioBus *bus, QVirtioDevice *d,
> diff --git a/tests/libqos/virtio.h b/tests/libqos/virtio.h
> index e663bcf..993ae0e 100644
> --- a/tests/libqos/virtio.h
> +++ b/tests/libqos/virtio.h
> @@ -12,13 +12,6 @@
>  
>  #include "libqos/malloc.h"
>  
> -#define QVIRTIO_RESET           0x0
> -#define QVIRTIO_ACKNOWLEDGE     0x1
> -#define QVIRTIO_DRIVER          0x2
> -#define QVIRTIO_DRIVER_OK       0x4
> -
> -#define QVIRTIO_F_NOTIFY_ON_EMPTY       0x01000000
> -#define QVIRTIO_F_ANY_LAYOUT            0x08000000
>  #define QVIRTIO_F_RING_INDIRECT_DESC    0x10000000
>  #define QVIRTIO_F_RING_EVENT_IDX        0x20000000
>  #define QVIRTIO_F_BAD_FEATURE           0x40000000
> @@ -27,8 +20,6 @@
>  #define QVRING_DESC_F_WRITE     0x2
>  #define QVRING_DESC_F_INDIRECT  0x4
>  
> -#define QVIRTIO_F_NOTIFY_ON_EMPTY       0x01000000
> -#define QVIRTIO_F_ANY_LAYOUT            0x08000000
>  #define QVIRTIO_F_RING_INDIRECT_DESC    0x10000000
>  #define QVIRTIO_F_RING_EVENT_IDX        0x20000000
>  #define QVIRTIO_F_BAD_FEATURE           0x40000000
> diff --git a/tests/virtio-blk-test.c b/tests/virtio-blk-test.c
> index 02107a6..bfeffc4 100644
> --- a/tests/virtio-blk-test.c
> +++ b/tests/virtio-blk-test.c
> @@ -20,6 +20,7 @@
>  #include "libqos/malloc-generic.h"
>  #include "qemu/bswap.h"
>  #include "standard-headers/linux/virtio_ids.h"
> +#include "standard-headers/linux/virtio_config.h"
>  
>  #define QVIRTIO_BLK_F_BARRIER       0x00000001
>  #define QVIRTIO_BLK_F_SIZE_MAX      0x00000002
> @@ -240,7 +241,7 @@ static void test_basic(const QVirtioBus *bus,
> QVirtioDevice *dev, 
>      guest_free(alloc, req_addr);
>  
> -    if (features & QVIRTIO_F_ANY_LAYOUT) {
> +    if (features & VIRTIO_F_ANY_LAYOUT) {
>          /* Write and read with 2 descriptor layout */
>          /* Write request */
>          req.type = QVIRTIO_BLK_T_OUT;
> @@ -607,7 +608,7 @@ static void pci_idx(void)
>      features = qvirtio_get_features(&qvirtio_pci, &dev->vdev);
>      features = features & ~(QVIRTIO_F_BAD_FEATURE |
>                              QVIRTIO_F_RING_INDIRECT_DESC |
> -                            QVIRTIO_F_NOTIFY_ON_EMPTY |
> QVIRTIO_BLK_F_SCSI);
> +                            VIRTIO_F_NOTIFY_ON_EMPTY |
> QVIRTIO_BLK_F_SCSI); qvirtio_set_features(&qvirtio_pci, &dev->vdev,
> features); 
>      vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&qvirtio_pci,
> &dev->vdev,

In standard-headers/linux/virtio_config.h, there is;

#define VIRTIO_F_NOTIFY_ON_EMPTY        24
#define VIRTIO_F_ANY_LAYOUT             27

whereas in tests/libqos.h, there is:

#define QVIRTIO_F_NOTIFY_ON_EMPTY       0x01000000
#define QVIRTIO_F_ANY_LAYOUT            0x08000000

It is necessary to use 2 << VIRTIO_F_NOTIFY_ON_EMPTY to make the change
properly.

Marc



reply via email to

[Prev in Thread] Current Thread [Next in Thread]