[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v6 08/11] target-avr: adding instruction transla
From: |
Michael Rolnik |
Subject: |
Re: [Qemu-devel] [PATCH v6 08/11] target-avr: adding instruction translation |
Date: |
Mon, 13 Jun 2016 23:25:08 +0300 |
what is the difference between tcg_gen_qemu_st16 and tcg_gen_qemu_st_tl
On Mon, Jun 13, 2016 at 7:06 PM, Richard Henderson <address@hidden> wrote:
> On 06/12/2016 12:01 PM, Michael Rolnik wrote:
>
>> +void gen_push_ret(CPUAVRState *env, int ret)
>> +{
>> + if (avr_feature(env, AVR_FEATURE_1_BYTE_PC)) {
>> +
>> + TCGv t0 = tcg_const_i32((ret & 0x0000ff));
>> +
>> + tcg_gen_qemu_st8(t0, cpu_sp, MMU_DATA_IDX);
>> + tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
>> +
>> + tcg_temp_free_i32(t0);
>> + } else if (avr_feature(env, AVR_FEATURE_2_BYTE_PC)) {
>> +
>> + TCGv t0 = tcg_const_i32((ret & 0x00ffff));
>> +
>> + tcg_gen_qemu_st16(t0, cpu_sp, MMU_DATA_IDX);
>> + tcg_gen_subi_tl(cpu_sp, cpu_sp, 2);
>>
>
> This stores to the wrong bytes. You need
>
> tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
> tcg_gen_qemu_st_tl(t0, cpu_sp, MMU_DATA_IDX, MO_BEUW);
> tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
>
> + } else if (avr_feature(env, AVR_FEATURE_3_BYTE_PC)) {
>> +
>> + TCGv t0 = tcg_const_i32((ret & 0x0000ff));
>> + TCGv t1 = tcg_const_i32((ret & 0xffff00) >> 8);
>> +
>> + tcg_gen_qemu_st8(t0, cpu_sp, MMU_DATA_IDX);
>> + tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
>> +
>> + tcg_gen_qemu_st16(t1, cpu_sp, MMU_DATA_IDX);
>> + tcg_gen_subi_tl(cpu_sp, cpu_sp, 2);
>>
>
> Similarly.
>
> +void gen_pop_ret(CPUAVRState *env, TCGv ret)
>> +{
>> + if (avr_feature(env, AVR_FEATURE_1_BYTE_PC)) {
>> +
>> + tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
>> + tcg_gen_qemu_ld8u(ret, cpu_sp, MMU_DATA_IDX);
>> + } else if (avr_feature(env, AVR_FEATURE_2_BYTE_PC)) {
>> +
>> + tcg_gen_addi_tl(cpu_sp, cpu_sp, 2);
>> + tcg_gen_qemu_ld16u(ret, cpu_sp, MMU_DATA_IDX);
>>
>
> Similarly,
>
> tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
> tcg_gen_qemu_ld_tl(ret, cpu_sp, MMU_DATA_IDX, MO_BEUW);
> tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
>
>
> + } else if (avr_feature(env, AVR_FEATURE_3_BYTE_PC)) {
>> +
>> + TCGv t0 = tcg_temp_new_i32();
>> +
>> + tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
>> + tcg_gen_qemu_ld8u(ret, cpu_sp, MMU_DATA_IDX);
>> +
>> + tcg_gen_addi_tl(cpu_sp, cpu_sp, 2);
>> + tcg_gen_qemu_ld16u(t0, cpu_sp, MMU_DATA_IDX);
>> +
>> + tcg_gen_shli_tl(t0, t0, 16);
>> + tcg_gen_or_tl(ret, ret, t0);
>>
>
> You're putting t0 at the wrong end.
>
> tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
> tcg_gen_qemu_ld_tl(t0, cpu_sp, MMU_DATA_IDX, MO_UB);
> tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
> tcg_gen_qemu_ld_tl(ret, cpu_sp, MMU_DATA_IDX, MO_BEUW);
> tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
> tcg_gen_deposit_tl(ret, ret, t0, 16, 8);
>
>
>
> r~
>
--
Best Regards,
Michael Rolnik
- [Qemu-devel] [PATCH v6 05/11] target-avr: adding AVR interrupt handling, (continued)
- [Qemu-devel] [PATCH v6 05/11] target-avr: adding AVR interrupt handling, Michael Rolnik, 2016/06/12
- [Qemu-devel] [PATCH v6 04/11] target-avr: adding instructions encodings, Michael Rolnik, 2016/06/12
- [Qemu-devel] [PATCH v6 06/11] target-avr: adding helpers for IN, OUT, SLEEP, WBR & unsupported instructions, Michael Rolnik, 2016/06/12
- [Qemu-devel] [PATCH v6 09/11] target-avr: updating translate.c to use instructions translation, Michael Rolnik, 2016/06/12
- [Qemu-devel] [PATCH v6 07/11] target-avr: adding instruction decoder, Michael Rolnik, 2016/06/12
- [Qemu-devel] [PATCH v6 11/11] target-avr: decoder generator. currently not used by the build, can be used manually, Michael Rolnik, 2016/06/12
- [Qemu-devel] [PATCH v6 10/11] target-avr: saving sreg, rampD, rampX, rampY, rampD, eind in HW representation saving cpu features, Michael Rolnik, 2016/06/12
- [Qemu-devel] [PATCH v6 08/11] target-avr: adding instruction translation, Michael Rolnik, 2016/06/12
- Re: [Qemu-devel] [PATCH v6 00/11] 8bit AVR cores, Richard Henderson, 2016/06/13