qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether O


From: Thomas Huth
Subject: [Qemu-devel] [PATCH v2] ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully
Date: Tue, 14 Jun 2016 15:57:56 +0200

Since the mac99 and g3beige PowerPC machines recently broke without
being noticed, it would be good to have a tester for "make check"
that detects such issues immediately. A simple way to test the firmware
of these machines is to use the "-prom-env" parameter of QEMU. This
parameter can be used to put some Forth code into the 'boot-command'
firmware variable which then can signal success to the tester by
writing a magic value to a known memory location. And since some of the
Sparc machines are also using OpenBIOS, they are now tested with this
prom-env-tester, too.

Reviewed-by: Markus Armbruster <address@hidden>
Signed-off-by: Thomas Huth <address@hidden>
---
 v2: Removed unnecessary include statements (as suggested by Markus)

 tests/Makefile.include |  5 +++
 tests/prom-env-test.c  | 90 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 95 insertions(+)
 create mode 100644 tests/prom-env-test.c

diff --git a/tests/Makefile.include b/tests/Makefile.include
index 7d63d16..f95a3ca 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -258,6 +258,10 @@ check-qtest-ppc-y += tests/boot-order-test$(EXESUF)
 check-qtest-ppc64-y += tests/boot-order-test$(EXESUF)
 check-qtest-ppc64-y += tests/spapr-phb-test$(EXESUF)
 gcov-files-ppc64-y += ppc64-softmmu/hw/ppc/spapr_pci.c
+check-qtest-ppc-y = tests/prom-env-test$(EXESUF)
+check-qtest-ppc64-y = tests/prom-env-test$(EXESUF)
+check-qtest-sparc-y = tests/prom-env-test$(EXESUF)
+check-qtest-sparc64-y = tests/prom-env-test$(EXESUF)
 check-qtest-microblazeel-y = $(check-qtest-microblaze-y)
 check-qtest-xtensaeb-y = $(check-qtest-xtensa-y)
 
@@ -549,6 +553,7 @@ tests/rtc-test$(EXESUF): tests/rtc-test.o
 tests/m48t59-test$(EXESUF): tests/m48t59-test.o
 tests/endianness-test$(EXESUF): tests/endianness-test.o
 tests/spapr-phb-test$(EXESUF): tests/spapr-phb-test.o $(libqos-obj-y)
+tests/prom-env-test$(EXESUF): tests/prom-env-test.o $(libqos-obj-y)
 tests/fdc-test$(EXESUF): tests/fdc-test.o
 tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
 tests/ahci-test$(EXESUF): tests/ahci-test.o $(libqos-pc-obj-y)
diff --git a/tests/prom-env-test.c b/tests/prom-env-test.c
new file mode 100644
index 0000000..6df57d2
--- /dev/null
+++ b/tests/prom-env-test.c
@@ -0,0 +1,90 @@
+/*
+ * Test OpenBIOS-based machines.
+ *
+ * Copyright (c) 2016 Red Hat Inc.
+ *
+ * Author:
+ *    Thomas Huth <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2
+ * or later. See the COPYING file in the top-level directory.
+ *
+ * This test is used to check that some OpenBIOS machines can be started
+ * successfully in TCG mode. To do this, we first put some Forth code into
+ * the "boot-command" Open Firmware environment variable. This Forth code
+ * writes a well-known magic value to a known location in memory. Then we
+ * start the guest so that OpenBIOS can boot and finally run the Forth code.
+ * The testing code here then can finally check whether the value has been
+ * successfully written into the guest memory.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest.h"
+
+#define MAGIC   0xcafec0de
+#define ADDRESS 0x4000
+
+static void check_guest_memory(void)
+{
+    uint32_t signature;
+    int i;
+
+    /* Poll until code has run and modified memory. Wait at most 30 seconds */
+    for (i = 0; i < 3000; ++i) {
+        signature = readl(ADDRESS);
+        if (signature == MAGIC) {
+            break;
+        }
+        g_usleep(10000);
+    }
+
+    g_assert_cmphex(signature, ==, MAGIC);
+}
+
+static void test_machine(const void *machine)
+{
+    char *args;
+
+    args = g_strdup_printf("-M %s,accel=tcg -prom-env 'boot-command=%x %x l!'",
+                           (const char *)machine, MAGIC, ADDRESS);
+
+    qtest_start(args);
+    check_guest_memory();
+    qtest_quit(global_qtest);
+
+    g_free(args);
+}
+
+static void add_tests(const char *machines[])
+{
+    int i;
+    char *name;
+
+    for (i = 0; machines[i] != NULL; i++) {
+        name = g_strdup_printf("prom-env/%s", machines[i]);
+        qtest_add_data_func(name, machines[i], test_machine);
+        g_free(name);
+    }
+}
+
+int main(int argc, char *argv[])
+{
+    const char *sparc_machines[] = { "SPARCbook", "Voyager", "SS-20", NULL };
+    const char *sparc64_machines[] = { "sun4u", "sun4v", NULL };
+    const char *mac_machines[] = { "mac99", "g3beige", NULL };
+    const char *arch = qtest_get_arch();
+
+    g_test_init(&argc, &argv, NULL);
+
+    if (!strcmp(arch, "ppc") || !strcmp(arch, "ppc64")) {
+        add_tests(mac_machines);
+    } else if (!strcmp(arch, "sparc")) {
+        add_tests(sparc_machines);
+    } else if (!strcmp(arch, "sparc64")) {
+        add_tests(sparc64_machines);
+    } else {
+        g_assert_not_reached();
+    }
+
+    return g_test_run();
+}
-- 
1.8.3.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]