[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 0/7] virtio-blk: multiqueue support
From: |
Paolo Bonzini |
Subject: |
Re: [Qemu-devel] [PATCH v3 0/7] virtio-blk: multiqueue support |
Date: |
Mon, 20 Jun 2016 13:42:14 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.1.0 |
On 20/06/2016 12:36, Stefan Hajnoczi wrote:
> On Tue, Jun 07, 2016 at 05:28:24PM +0100, Stefan Hajnoczi wrote:
>> v3:
>> * Drop Patch 1 to batch guest notify for non-dataplane
>>
>> The Linux AIO completion BH and the virtio-blk batch notify BH changed
>> order
>> in the AioContext->first_bh list as a side-effect of moving the BH from
>> hw/block/dataplane/virtio-blk.c to hw/block/virtio-blk.c. This caused a
>> serious performance regression for both dataplane and non-dataplane.
>>
>> I've decided not to move the BH in this series and work on a separate
>> solution for making batch notify generic.
>>
>> The remaining patches have been reordered and cleaned up.
>>
>> * See performance data below.
>>
>> v2:
>> * Simplify s->rq live migration [Paolo]
>> * Use more efficient bitmap ops for batch notification [Paolo]
>> * Fix perf regression due to batch notify BH in wrong AioContext [Christian]
>>
>> The virtio_blk guest driver has supported multiple virtqueues since Linux
>> 3.17.
>> This patch series adds multiple virtqueues to QEMU's virtio-blk emulated
>> device.
>>
>> Ming Lei sent patches previously but these were not merged. This series
>> implements virtio-blk multiqueue for QEMU from scratch since the codebase has
>> changed. Live migration support for s->rq was also missing from the previous
>> series and has been added.
>>
>> It's important to note that QEMU's block layer does not support multiqueue
>> yet.
>> Therefore virtio-blk device processes all virtqueues in the same AioContext
>> (IOThread). Further work is necessary to take advantage of multiqueue
>> support
>> in QEMU's block layer once it becomes available.
>>
>> Performance results:
>>
>> Using virtio-blk-pci,num-queues=4 can produce a speed-up but -smp 4
>> introduces a lot of variance across runs. No pinning was performed.
>>
>> Results show that there is no regression anymore, thanks to dropping the
>> batch notify BH patch.
>>
>> RHEL 7.2 guest on RHEL 7.2 host with 1 vcpu and 1 GB RAM unless otherwise
>> noted. The default configuration of the Linux null_blk driver is used as
>> /dev/vdb.
>>
>> $ cat files/fio.job
>> [global]
>> filename=/dev/vdb
>> ioengine=libaio
>> direct=1
>> runtime=60
>> ramp_time=5
>> gtod_reduce=1
>>
>> [job1]
>> numjobs=4
>> iodepth=16
>> rw=randread
>> bs=4K
>>
>> $ ./analyze.py runs/
>> Name IOPS Error
>> unpatched-d6550e9ed2 19269820.2 ± 1.36%
>> unpatched-dataplane-d6550e9ed2 22351400.4 ± 1.07%
>> v3-dataplane 22318511.2 ± 0.77%
>> v3-no-dataplane 18936103.8 ± 1.12%
>> v3-queues-4-no-dataplane 19177021.8 ± 1.45%
>> v3-smp-4-no-dataplane 25509585.2 ± 29.50%
>> v3-smp-4-no-dataplane-no-mq 12466177.2 ± 7.88%
>>
>> Configuration:
>> Name Patched? Dataplane? SMP? MQ?
>> unpatched-d6550e9ed2 N N N N
>> unpatched-dataplane-d6550e9ed2 N Y N N
>> v3-dataplane Y Y N N
>> v3-no-dataplane Y N N N
>> v3-queues-4-no-dataplane Y N N Y
>> v3-smp-4-no-dataplane Y N Y Y
>> v3-smp-4-no-dataplane-no-mq Y N Y N
>>
>> SMP means -smp 4.
>> MQ means virtio-blk-pci,num-queues=4.
>>
>> Stefan Hajnoczi (7):
>> virtio-blk: add VirtIOBlockConf->num_queues
>> virtio-blk: multiqueue batch notify
>> virtio-blk: tell dataplane which vq to notify
>> virtio-blk: associate request with a virtqueue
>> virtio-blk: live migrate s->rq with multiqueue
>> virtio-blk: dataplane multiqueue support
>> virtio-blk: add num-queues device property
>>
>> hw/block/dataplane/virtio-blk.c | 81
>> +++++++++++++++++++++++++++++------------
>> hw/block/dataplane/virtio-blk.h | 2 +-
>> hw/block/virtio-blk.c | 52 +++++++++++++++++++++-----
>> include/hw/virtio/virtio-blk.h | 6 ++-
>> 4 files changed, 105 insertions(+), 36 deletions(-)
>
> Ping?
>
Looks good to me, but I'll never understand who's supposed to apply
virtio-blk patches. :)
Paolo
- [Qemu-devel] [PATCH v3 0/7] virtio-blk: multiqueue support, Stefan Hajnoczi, 2016/06/08
- [Qemu-devel] [PATCH v3 3/7] virtio-blk: tell dataplane which vq to notify, Stefan Hajnoczi, 2016/06/08
- [Qemu-devel] [PATCH v3 4/7] virtio-blk: associate request with a virtqueue, Stefan Hajnoczi, 2016/06/08
- [Qemu-devel] [PATCH v3 2/7] virtio-blk: multiqueue batch notify, Stefan Hajnoczi, 2016/06/08
- [Qemu-devel] [PATCH v3 1/7] virtio-blk: add VirtIOBlockConf->num_queues, Stefan Hajnoczi, 2016/06/08
- [Qemu-devel] [PATCH v3 5/7] virtio-blk: live migrate s->rq with multiqueue, Stefan Hajnoczi, 2016/06/08
- [Qemu-devel] [PATCH v3 6/7] virtio-blk: dataplane multiqueue support, Stefan Hajnoczi, 2016/06/08
- [Qemu-devel] [PATCH v3 7/7] virtio-blk: add num-queues device property, Stefan Hajnoczi, 2016/06/08
- Re: [Qemu-devel] [PATCH v3 0/7] virtio-blk: multiqueue support, Stefan Hajnoczi, 2016/06/20