[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] aux: fix break that wanted to break two levels out
From: |
Paolo Bonzini |
Subject: |
[Qemu-devel] [PATCH] aux: fix break that wanted to break two levels out |
Date: |
Tue, 21 Jun 2016 15:16:17 +0200 |
The last "ret = AUX_I2C_NACK;" is dead, because it is always overridden
by AUX_I2C_ACK. What really the code wants is to jump out of the switch
statement, and a "return" will not cut it because it would omit a debug
printf.
Change the logic so that we can break out of the while loop. For clarity,
hoist the bus->last_* assignments up, right after i2c_start_transfer.
Signed-off-by: Paolo Bonzini <address@hidden>
---
hw/misc/aux.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/hw/misc/aux.c b/hw/misc/aux.c
index 25d7712..06e24ca 100644
--- a/hw/misc/aux.c
+++ b/hw/misc/aux.c
@@ -153,12 +153,12 @@ AUXReply aux_request(AUXBus *bus, AUXCommand cmd,
uint32_t address,
case WRITE_I2C_MOT:
case READ_I2C_MOT:
is_write = cmd == READ_I2C_MOT ? false : true;
+ ret = AUX_I2C_NACK;
if (!i2c_bus_busy(i2c_bus)) {
/*
* No transactions started..
*/
if (i2c_start_transfer(i2c_bus, address, is_write)) {
- ret = AUX_I2C_NACK;
break;
}
} else if ((address != bus->last_i2c_address) ||
@@ -168,22 +168,22 @@ AUXReply aux_request(AUXBus *bus, AUXCommand cmd,
uint32_t address,
*/
i2c_end_transfer(i2c_bus);
if (i2c_start_transfer(i2c_bus, address, is_write)) {
- ret = AUX_I2C_NACK;
break;
}
}
+ bus->last_transaction = cmd;
+ bus->last_i2c_address = address;
while (len > 0) {
if (i2c_send_recv(i2c_bus, data++, is_write) < 0) {
- ret = AUX_I2C_NACK;
i2c_end_transfer(i2c_bus);
break;
}
len--;
}
- bus->last_transaction = cmd;
- bus->last_i2c_address = address;
- ret = AUX_I2C_ACK;
+ if (len == 0) {
+ ret = AUX_I2C_ACK;
+ }
break;
default:
DPRINTF("Not implemented!\n");
--
2.5.5