qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 0/3] Add ASPEED SCU device


From: Andrew Jeffery
Subject: [Qemu-devel] [PATCH v3 0/3] Add ASPEED SCU device
Date: Fri, 24 Jun 2016 14:28:22 +0930

Hi all,

These are three patches implementing minimal functionality for the ASPEED System
Control Unit device and integrating it into the AST2400 SoC model/palmetto-bmc
machine. The device is critical for initialisation of u-boot and the kernel as
it provides chip level control registers, influencing the configuration of the
software and the software's configuration of the SoC.

Since v2:

* Fix mixing of offsets and register indexes
* Sanity check device property values
* SoC actually initialises the silicon revision

Since v1:

* Select reset values based on silicon revision
* Expose hardware strapping values via properties

Andrew Jeffery (3):
  hw/misc: Add a model for the ASPEED System Control Unit
  ast2400: Integrate the SCU model and set silicon revision
  palmetto-bmc: Configure the SCU's hardware strapping register

 hw/arm/ast2400.c             |  21 ++++
 hw/arm/palmetto-bmc.c        |   2 +
 hw/misc/Makefile.objs        |   1 +
 hw/misc/aspeed_scu.c         | 284 +++++++++++++++++++++++++++++++++++++++++++
 hw/misc/trace-events         |   3 +
 include/hw/arm/ast2400.h     |   2 +
 include/hw/misc/aspeed_scu.h |  34 ++++++
 7 files changed, 347 insertions(+)
 create mode 100644 hw/misc/aspeed_scu.c
 create mode 100644 include/hw/misc/aspeed_scu.h

-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]