qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 3/3] tests: in IDE and AHCI tests perform DMA write


From: Denis V. Lunev
Subject: [Qemu-devel] [PATCH 3/3] tests: in IDE and AHCI tests perform DMA write before flushing
Date: Fri, 24 Jun 2016 18:06:42 +0300

From: Evgeny Yakovlev <address@hidden>

Due to previous change flushed on clean disks stopped generating
flush_to_disk events and IDE and AHCI tests that test flush commands began
to fail.

This change adds additional DMA writes to affected tests before sending
flush cache commands so that bdrv_flush actually generates flush_to_disk
event.

Signed-off-by: Evgeny Yakovlev <address@hidden>
Signed-off-by: Denis V. Lunev <address@hidden>
CC: Kevin Wolf <address@hidden>
CC: Max Reitz <address@hidden>
CC: Stefan Hajnoczi <address@hidden>
CC: Fam Zheng <address@hidden>
CC: John Snow <address@hidden>
---
 tests/ahci-test.c | 34 ++++++++++++++++++++++++++++++++--
 tests/ide-test.c  | 43 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 75 insertions(+), 2 deletions(-)

diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 57dc44c..d707714 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -1063,11 +1063,34 @@ static void test_dma_fragmented(void)
     g_free(tx);
 }
 
+/*
+ * Write sector 0 with random data to make AHCI storage dirty
+ * Needed for flush tests so that flushes actually go though the block layer
+ */
+static void make_dirty(AHCIQState* ahci, uint8_t port)
+{
+    uint64_t ptr;
+    unsigned bufsize = 512;
+
+    ptr = ahci_alloc(ahci, bufsize);
+    g_assert(ptr);
+
+    ahci_guest_io(ahci, port, CMD_WRITE_DMA, ptr, bufsize, 0);
+    ahci_free(ahci, ptr);
+}
+
 static void test_flush(void)
 {
     AHCIQState *ahci;
+    uint8_t port;
 
     ahci = ahci_boot_and_enable(NULL);
+
+    port = ahci_port_select(ahci);
+    ahci_port_clear(ahci, port);
+
+    make_dirty(ahci, port);
+
     ahci_test_flush(ahci);
     ahci_shutdown(ahci);
 }
@@ -1087,10 +1110,13 @@ static void test_flush_retry(void)
                                 debug_path,
                                 tmp_path, imgfmt);
 
-    /* Issue Flush Command and wait for error */
     port = ahci_port_select(ahci);
     ahci_port_clear(ahci, port);
 
+    /* Issue write so that flush actually goes to disk */
+    make_dirty(ahci, port);
+
+    /* Issue Flush Command and wait for error */
     cmd = ahci_guest_io_halt(ahci, port, CMD_FLUSH_CACHE, 0, 0, 0);
     ahci_guest_io_resume(ahci, cmd);
 
@@ -1343,9 +1369,13 @@ static void test_flush_migrate(void)
 
     set_context(src->parent);
 
-    /* Issue Flush Command */
     px = ahci_port_select(src);
     ahci_port_clear(src, px);
+
+    /* Dirty device so that flush reaches disk */
+    make_dirty(src, px);
+
+    /* Issue Flush Command */
     cmd = ahci_command_create(CMD_FLUSH_CACHE);
     ahci_command_commit(src, cmd, px);
     ahci_command_issue_async(src, cmd);
diff --git a/tests/ide-test.c b/tests/ide-test.c
index fed1b2e..8466d0f 100644
--- a/tests/ide-test.c
+++ b/tests/ide-test.c
@@ -499,6 +499,39 @@ static void test_identify(void)
     ide_test_quit();
 }
 
+/*
+ * Write sector 0 with random data to make IDE storage dirty
+ * Needed for flush tests so that flushes actually go though the block layer
+ */
+static void make_dirty(uint8_t device)
+{
+    uint8_t status;
+    size_t len = 512;
+    uintptr_t guest_buf;
+    void* buf;
+
+    guest_buf = guest_alloc(guest_malloc, len);
+    buf = g_malloc(len);
+    g_assert(guest_buf);
+    g_assert(buf);
+
+    memwrite(guest_buf, buf, len);
+
+    PrdtEntry prdt[] = {
+        {
+            .addr = cpu_to_le32(guest_buf),
+            .size = cpu_to_le32(len | PRDT_EOT),
+        },
+    };
+
+    status = send_dma_request(CMD_WRITE_DMA, 0, 1, prdt,
+                              ARRAY_SIZE(prdt), NULL);
+    g_assert_cmphex(status, ==, BM_STS_INTR);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+    g_free(buf);
+}
+
 static void test_flush(void)
 {
     uint8_t data;
@@ -507,6 +540,11 @@ static void test_flush(void)
         "-drive file=blkdebug::%s,if=ide,cache=writeback,format=raw",
         tmp_path);
 
+    qtest_irq_intercept_in(global_qtest, "ioapic");
+
+    /* Dirty media so that CMD_FLUSH_CACHE will actually go to disk */
+    make_dirty(0);
+
     /* Delay the completion of the flush request until we explicitly do it */
     g_free(hmp("qemu-io ide0-hd0 \"break flush_to_os A\""));
 
@@ -549,6 +587,11 @@ static void test_retry_flush(const char *machine)
         "rerror=stop,werror=stop",
         debug_path, tmp_path);
 
+    qtest_irq_intercept_in(global_qtest, "ioapic");
+
+    /* Dirty media so that CMD_FLUSH_CACHE will actually go to disk */
+    make_dirty(0);
+
     /* FLUSH CACHE command on device 0*/
     outb(IDE_BASE + reg_device, 0);
     outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE);
-- 
2.1.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]