qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v5 0/9] ast2400: SMC controllers


From: Cédric Le Goater
Subject: [Qemu-devel] [PATCH v5 0/9] ast2400: SMC controllers
Date: Tue, 28 Jun 2016 20:24:21 +0200

Hello,

The following adds support for the AST2400 SMC controllers. The device
model does not implement all the HW features, linear addressing mode
is underway, but it should be complete enough for the OpenBMC distro.

Flash images can be grabbed here for testing :

    
https://openpower.xyz/job/openbmc-build/distro=ubuntu,target=palmetto/lastSuccessfulBuild/artifact/images/palmetto/flash-palmetto
    
https://openpower.xyz/job/openpower-op-build/distro=ubuntu,target=palmetto/lastSuccessfulBuild/artifact/images/palmetto.pnor

Based on commit dc154b1db4b9.

Changes Since v4:
  - included "ssi: change ssi_slave_init to be a realize op" which is a
    prereq  
  - included more fixes from Paolo on m25p80
  - fixed qtest command line and Makefile

Changes Since v3:
  - fixed sabrelite_init() to use drive_get_next()
  - fixed typos
  - fixed multiple error handling when setting properties
  - fixed error logging
  - added extra register definitions
  - constantified a couple of routine arguments
  - sorted out what was need for migration
  - reworked the structures handling the IOs on the flash modules
  - moved mapping in SOC initialization   

Changes Since v2:
  - switched to a realize ops  
  - moved the initialization of the flash modules under the palmetto
    platform
  - changed mkstemp() path prefix

Changes Since v1:
  - included Paolo's fix adding a "drive" property to the flash device
    model    
  - fixed drive definition in the test command line

Thanks,

C.

Cédric Le Goater (5):
  ssi: change ssi_slave_init to be a realize ops
  ast2400: add SMC controllers (FMC and SPI)
  ast2400: add SPI flash slaves
  ast2400: create SPI flash slaves
  tests: add a m25p80 test

Paolo Bonzini (4):
  m25p80: do not put iovec on the stack
  m25p80: avoid out of bounds accesses
  m25p80: change cur_addr to 32 bit integer
  m25p80: qdev-ify drive property

 hw/arm/ast2400.c                    |  39 ++-
 hw/arm/palmetto-bmc.c               |  31 +++
 hw/arm/sabrelite.c                  |  18 +-
 hw/arm/spitz.c                      |  12 +-
 hw/arm/tosa.c                       |   5 +-
 hw/arm/xilinx_zynq.c                |   8 +-
 hw/arm/xlnx-ep108.c                 |   9 +-
 hw/arm/z2.c                         |   6 +-
 hw/block/m25p80.c                   |  76 +++---
 hw/display/ads7846.c                |   5 +-
 hw/display/ssd0323.c                |   5 +-
 hw/microblaze/petalogix_ml605_mmu.c |   9 +-
 hw/misc/max111x.c                   |  12 +-
 hw/sd/ssi-sd.c                      |   9 +-
 hw/ssi/Makefile.objs                |   1 +
 hw/ssi/aspeed_smc.c                 | 470 ++++++++++++++++++++++++++++++++++++
 hw/ssi/ssi.c                        |   6 +-
 include/hw/arm/ast2400.h            |   3 +
 include/hw/ssi/aspeed_smc.h         | 100 ++++++++
 include/hw/ssi/ssi.h                |   2 +-
 tests/Makefile.include              |   2 +
 tests/m25p80-test.c                 | 242 +++++++++++++++++++
 22 files changed, 985 insertions(+), 85 deletions(-)
 create mode 100644 hw/ssi/aspeed_smc.c
 create mode 100644 include/hw/ssi/aspeed_smc.h
 create mode 100644 tests/m25p80-test.c

-- 
2.1.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]