qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [RFC PATCH 05/11] docs: add qemu-clock documentation


From: Peter Maydell
Subject: Re: [Qemu-devel] [RFC PATCH 05/11] docs: add qemu-clock documentation
Date: Fri, 29 Jul 2016 14:47:02 +0100

On 13 June 2016 at 17:27,  <address@hidden> wrote:
> From: KONRAD Frederic <address@hidden>
>
> This adds the qemu-clock documentation.
>
> Signed-off-by: KONRAD Frederic <address@hidden>
> ---
>  docs/clock.txt | 112 
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 112 insertions(+)
>  create mode 100644 docs/clock.txt
>
> diff --git a/docs/clock.txt b/docs/clock.txt
> new file mode 100644
> index 0000000..f4ad4c8
> --- /dev/null
> +++ b/docs/clock.txt
> @@ -0,0 +1,112 @@
> +
> +What is a QEMU_CLOCK
> +====================
> +
> +A QEMU_CLOCK is a QOM Object developed for the purpose of modeling a clock 
> tree
> +with QEMU.
> +
> +It only simulates the clock by keeping a copy of the current frequency and
> +doesn't model the signal itself such as pin toggle or duty cycle.
> +
> +It allows to model the impact of badly configured PLL, clock source selection
> +or disabled clock on the models.

I think this would be a good place to give a brief bullet-point summary
of the operations that can be done on a clock (which then can be
expanded on in sections below).


> +
> +Bounding the clock together to create a tree

"Binding" ?

> +============================================
> +
> +In order to create a clock tree with QEMU_CLOCK two or more clock must be 
> bound
> +together.

Is the simple case of "only one clock, not bound to any other clock,
with a callback" not a valid clock tree ?

> Let's say there are two clocks clk_a and clk_b:
> +Using qemu_clk_bound(clk_a, clk_b) will bound clk_a and clk_b.

"bind" ? (and in the function name)

> +
> +Binding two qemu-clk together is a unidirectional link which means that 
> changing

"creates a unidirectional link" ?

> +the rate of clk_a will propagate to clk_b and not the opposite. The bound
> +process automatically refresh clk_b rate.

"refreshes"

> +
> +Clock can be bound and unbound during execution for modeling eg: a clock
> +selector.
> +
> +A clock can drive more than one other clock. eg with this code:
> +qemu_clk_bound(clk_a, clk_b);
> +qemu_clk_bound(clk_a, clk_c);
> +
> +A clock rate change one clk_a will propagate to clk_b and clk_c.

If you bind clock A to clock B, then is trying to change the rate
of clock B (a) a bug (assert, or fail the call) (b) OK but
ignored (c) OK but the changed rate doesn't get used until/unless
the clocks are unbound ?

Is it possible to bind two clocks together but with a frequency
difference between them (ie to model the common case where there's
some master clock and then a clock divider that creates various
other clocks based on the rate of that master) ?

> +
> +Implementing a callback on a rate change
> +========================================
> +
> +The function prototype is the following:
> +typedef float (*qemu_clk_rate_change_cb)(void *opaque, float rate);
> +
> +It's main goal is to modify the rate before it's passed to the next clocks in
> +the tree.
> +
> +eg: for a 4x PLL the function will be:
> +float qemu_clk_rate_change_cb(void *opaque, float rate)
> +{
> +    return 4.0 * rate;
> +}
> +
> +To set the callback for the clock:
> +void qemu_clk_set_callback(qemu_clk clk, qemu_clk_on_rate_update_cb cb,
> +                           void *opaque);
> +can be called.
> +
> +NOTE: It's not recommended that the clock is driven by more than one clock 
> as it

did you mean "callback" here ?

> +would mean that we don't know which clock trigger the callback.
> +
> +The rate update process
> +=======================
> +
> +The rate update happen in this way:
> +When a model wants to update a clock frequency (eg: based on a register 
> change
> +or something similar) it will call qemu_clk_update_rate(..) on the clock:
> +  * The callback associated to the clock is called with the new rate.
> +  * qemu_clk_update_rate(..) is then called on all bound clock with the
> +    value returned by the callback.
> +
> +NOTE: When no callback is attached the clock qemu_clk_update_rate(..) is 
> called
> +with the unmodified rate.
> +
> +Attaching a QEMU_CLOCK to a DeviceState
> +=======================================
> +
> +Attaching a qemu-clk to a DeviceState is required to be able to get the clock
> +outside the model through qemu_clk_get_pin(..).
> +
> +It is also required to be able to print the clock and its rate with info 
> qtree.
> +For example:
> +
> +  type System
> +  dev: xlnx.zynqmp_crf, id ""
> +    gpio-out "sysbus-irq" 1
> +    gpio-out "RST_A9" 4
> +    qemu-clk "dbg_trace" 0.0
> +    qemu-clk "vpll_to_lpd" 625000000.0
> +    qemu-clk "dp_stc_ref" 0.0
> +    qemu-clk "dpll_to_lpd" 12500000.0
> +    qemu-clk "acpu_clk" 0.0
> +    qemu-clk "pcie_ref" 0.0
> +    qemu-clk "topsw_main" 0.0
> +    qemu-clk "topsw_lsbus" 0.0
> +    qemu-clk "dp_audio_ref" 0.0
> +    qemu-clk "sata_ref" 0.0
> +    qemu-clk "dp_video_ref" 71428568.0
> +    qemu-clk "vpll_clk" 2500000000.0
> +    qemu-clk "apll_to_lpd" 12500000.0
> +    qemu-clk "dpll_clk" 50000000.0
> +    qemu-clk "gpu_ref" 0.0
> +    qemu-clk "aux_refclk" 0.0
> +    qemu-clk "video_clk" 27000000.0
> +    qemu-clk "gdma_ref" 0.0
> +    qemu-clk "gt_crx_ref_clk" 0.0
> +    qemu-clk "dbg_fdp" 0.0
> +    qemu-clk "apll_clk" 50000000.0
> +    qemu-clk "pss_alt_ref_clk" 0.0
> +    qemu-clk "ddr" 0.0
> +    qemu-clk "pss_ref_clk" 50000000.0
> +    qemu-clk "dpdma_ref" 0.0
> +    qemu-clk "dbg_tstmp" 0.0
> +    mmio 00000000fd1a0000/000000000000010c
> +
> +This way a DeviceState can have multiple clock input or output.
> +
> --
> 2.5.5

thanks
-- PMM



reply via email to

[Prev in Thread] Current Thread [Next in Thread]