qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v4] ppc: Fix signal delivery in ppc-user and ppc64-u


From: Benjamin Herrenschmidt
Subject: [Qemu-devel] [PATCH v4] ppc: Fix signal delivery in ppc-user and ppc64-user
Date: Wed, 03 Aug 2016 22:38:51 +1000

There were a number of bugs in the implementation:

 - The structure alignment was wrong for 64-bit.

 - Also 64-bit only does RT signals.

 - On 64-bit, we need to put a pointer to the (aligned) vector registers
   in the frame and use it for restoring

 - We had endian bugs when saving/restoring vector registers

 - My recent fixes for exception NIP broke sigreturn in user mode
   causing us to resume one instruction too far.

 - Add VSR second halves

Signed-off-by: Benjamin Herrenschmidt <address@hidden>
---
v2. Fix endian bugs too
    Fix bad PC on sigreturn

v3. Add missing VSX second halves
    Tested with ppc32, ppc64be and ppc64le, verified reading
    and writing VSX and VMX registers from a signal handler
    and observing the result in the main program. Compared
    successfully to running in actual hardware.

v4. Improve comments about alignment.

 linux-user/main.c           |   2 +-
 linux-user/ppc/syscall_nr.h |   2 +
 linux-user/signal.c         | 124 +++++++++++++++++++++++++++++++-------------
 3 files changed, 90 insertions(+), 38 deletions(-)

diff --git a/linux-user/main.c b/linux-user/main.c
index 1d149dc..24f34e6 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -2003,12 +2003,12 @@ void cpu_loop(CPUPPCState *env)
             if (ret == -TARGET_ERESTARTSYS) {
                 break;
             }
-            env->nip += 4;
             if (ret == (target_ulong)(-TARGET_QEMU_ESIGRETURN)) {
                 /* Returning from a successful sigreturn syscall.
                    Avoid corrupting register state.  */
                 break;
             }
+            env->nip += 4;
             if (ret > (target_ulong)(-515)) {
                 env->crf[0] |= 0x1;
                 ret = -ret;
diff --git a/linux-user/ppc/syscall_nr.h b/linux-user/ppc/syscall_nr.h
index 46ed8a6..afa3654 100644
--- a/linux-user/ppc/syscall_nr.h
+++ b/linux-user/ppc/syscall_nr.h
@@ -120,7 +120,9 @@
 #define TARGET_NR_sysinfo                116
 #define TARGET_NR_ipc                    117
 #define TARGET_NR_fsync                  118
+#if !defined(TARGET_PPC64)
 #define TARGET_NR_sigreturn              119
+#endif
 #define TARGET_NR_clone                  120
 #define TARGET_NR_setdomainname          121
 #define TARGET_NR_uname                  122
diff --git a/linux-user/signal.c b/linux-user/signal.c
index 9a4d894..55d9046 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -4408,7 +4408,12 @@ struct target_mcontext {
     target_ulong mc_gregs[48];
     /* Includes fpscr.  */
     uint64_t mc_fregs[33];
+#if defined(TARGET_PPC64)
+    /* Pointer to the vector regs */
+    target_ulong v_regs;
+#else
     target_ulong mc_pad[2];
+#endif
     /* We need to handle Altivec and SPE at the same time, which no
        kernel needs to do.  Fortunately, the kernel defines this bit to
        be Altivec-register-large all the time, rather than trying to
@@ -4418,15 +4423,30 @@ struct target_mcontext {
         uint32_t spe[33];
         /* Altivec vector registers.  The packing of VSCR and VRSAVE
            varies depending on whether we're PPC64 or not: PPC64 splits
-           them apart; PPC32 stuffs them together.  */
+           them apart; PPC32 stuffs them together.
+           We also need to account for the VSX registers on PPC64
+        */
 #if defined(TARGET_PPC64)
-#define QEMU_NVRREG 34
+#define QEMU_NVRREG (34 + 16)
+        /* On ppc64, this mcontext structure is naturally *unaligned*,
+         * or rather it is aligned on a 8 bytes boundary but not on
+         * a 16 bytes one. This pad fixes it up. This is also why the
+         * vector regs are referenced by the v_regs pointer above so
+         * any amount of padding can be added here
+         */
+        target_ulong pad;
 #else
+        /* On ppc32, we are already aligned to 16 bytes */
 #define QEMU_NVRREG 33
 #endif
-        ppc_avr_t altivec[QEMU_NVRREG];
+        /* We cannot use ppc_avr_t here as we do *not* want the implied
+         * 16-bytes alignment that would result from it. This would have
+         * the effect of making the whole struct target_mcontext aligned
+         * which breaks the layout of struct target_ucontext on ppc64.
+         */
+        uint64_t altivec[QEMU_NVRREG][2];
 #undef QEMU_NVRREG
-    } mc_vregs __attribute__((__aligned__(16)));
+    } mc_vregs;
 };
 
 /* See arch/powerpc/include/asm/sigcontext.h.  */
@@ -4580,6 +4600,16 @@ static target_ulong get_sigframe(struct target_sigaction 
*ka,
     return (oldsp - frame_size) & ~0xFUL;
 }
 
+#if ((defined(TARGET_WORDS_BIGENDIAN) && defined(HOST_WORDS_BIGENDIAN)) || \
+     (!defined(HOST_WORDS_BIGENDIAN) && !defined(TARGET_WORDS_BIGENDIAN)))
+#define PPC_VEC_HI      0
+#define PPC_VEC_LO      1
+#else
+#define PPC_VEC_HI      1
+#define PPC_VEC_LO      0
+#endif
+
+
 static void save_user_regs(CPUPPCState *env, struct target_mcontext *frame)
 {
     target_ulong msr = env->msr;
@@ -4606,18 +4636,33 @@ static void save_user_regs(CPUPPCState *env, struct 
target_mcontext *frame)
 
     /* Save Altivec registers if necessary.  */
     if (env->insns_flags & PPC_ALTIVEC) {
+        uint32_t *vrsave;
         for (i = 0; i < ARRAY_SIZE(env->avr); i++) {
             ppc_avr_t *avr = &env->avr[i];
-            ppc_avr_t *vreg = &frame->mc_vregs.altivec[i];
+            ppc_avr_t *vreg = (ppc_avr_t *)&frame->mc_vregs.altivec[i];
 
-            __put_user(avr->u64[0], &vreg->u64[0]);
-            __put_user(avr->u64[1], &vreg->u64[1]);
+            __put_user(avr->u64[PPC_VEC_HI], &vreg->u64[0]);
+            __put_user(avr->u64[PPC_VEC_LO], &vreg->u64[1]);
         }
         /* Set MSR_VR in the saved MSR value to indicate that
            frame->mc_vregs contains valid data.  */
         msr |= MSR_VR;
-        __put_user((uint32_t)env->spr[SPR_VRSAVE],
-                   &frame->mc_vregs.altivec[32].u32[3]);
+#if defined(TARGET_PPC64)
+        vrsave = (uint32_t *)&frame->mc_vregs.altivec[33];
+        /* 64-bit needs to put a pointer to the vectors in the frame */
+        __put_user(h2g(frame->mc_vregs.altivec), &frame->v_regs);
+#else
+        vrsave = (uint32_t *)&frame->mc_vregs.altivec[32];
+#endif
+        __put_user((uint32_t)env->spr[SPR_VRSAVE], vrsave);
+    }
+
+    /* Save VSX second halves */
+    if (env->insns_flags2 & PPC2_VSX) {
+        uint64_t *vsregs = (uint64_t *)&frame->mc_vregs.altivec[34];
+        for (i = 0; i < ARRAY_SIZE(env->vsr); i++) {
+            __put_user(env->vsr[i], &vsregs[i]);
+        }
     }
 
     /* Save floating point registers.  */
@@ -4697,17 +4742,39 @@ static void restore_user_regs(CPUPPCState *env,
 
     /* Restore Altivec registers if necessary.  */
     if (env->insns_flags & PPC_ALTIVEC) {
+        ppc_avr_t *v_regs;
+        uint32_t *vrsave;
+#if defined(TARGET_PPC64)
+        uint64_t v_addr;
+        /* 64-bit needs to recover the pointer to the vectors from the frame */
+        __get_user(v_addr, &frame->v_regs);
+        v_regs = g2h(v_addr);
+#else
+        v_regs = (ppc_avr_t *)frame->mc_vregs.altivec;
+#endif
         for (i = 0; i < ARRAY_SIZE(env->avr); i++) {
             ppc_avr_t *avr = &env->avr[i];
-            ppc_avr_t *vreg = &frame->mc_vregs.altivec[i];
+            ppc_avr_t *vreg = &v_regs[i];
 
-            __get_user(avr->u64[0], &vreg->u64[0]);
-            __get_user(avr->u64[1], &vreg->u64[1]);
+            __get_user(avr->u64[PPC_VEC_HI], &vreg->u64[0]);
+            __get_user(avr->u64[PPC_VEC_LO], &vreg->u64[1]);
         }
         /* Set MSR_VEC in the saved MSR value to indicate that
            frame->mc_vregs contains valid data.  */
-        __get_user(env->spr[SPR_VRSAVE],
-                   (target_ulong *)(&frame->mc_vregs.altivec[32].u32[3]));
+#if defined(TARGET_PPC64)
+        vrsave = (uint32_t *)&v_regs[33];
+#else
+        vrsave = (uint32_t *)&v_regs[32];
+#endif
+        __get_user(env->spr[SPR_VRSAVE], vrsave);
+    }
+
+    /* Restore VSX second halves */
+    if (env->insns_flags2 & PPC2_VSX) {
+        uint64_t *vsregs = (uint64_t *)&frame->mc_vregs.altivec[34];
+        for (i = 0; i < ARRAY_SIZE(env->vsr); i++) {
+            __get_user(env->vsr[i], &vsregs[i]);
+        }
     }
 
     /* Restore floating point registers.  */
@@ -4738,6 +4805,7 @@ static void restore_user_regs(CPUPPCState *env,
     }
 }
 
+#if !defined(TARGET_PPC64)
 static void setup_frame(int sig, struct target_sigaction *ka,
                         target_sigset_t *set, CPUPPCState *env)
 {
@@ -4745,9 +4813,6 @@ static void setup_frame(int sig, struct target_sigaction 
*ka,
     struct target_sigcontext *sc;
     target_ulong frame_addr, newsp;
     int err = 0;
-#if defined(TARGET_PPC64)
-    struct image_info *image = ((TaskState *)thread_cpu->opaque)->info;
-#endif
 
     frame_addr = get_sigframe(ka, env, sizeof(*frame));
     trace_user_setup_frame(env, frame_addr);
@@ -4757,11 +4822,7 @@ static void setup_frame(int sig, struct target_sigaction 
*ka,
 
     __put_user(ka->_sa_handler, &sc->handler);
     __put_user(set->sig[0], &sc->oldmask);
-#if TARGET_ABI_BITS == 64
-    __put_user(set->sig[0] >> 32, &sc->_unused[3]);
-#else
     __put_user(set->sig[1], &sc->_unused[3]);
-#endif
     __put_user(h2g(&frame->mctx), &sc->regs);
     __put_user(sig, &sc->signal);
 
@@ -4790,22 +4851,7 @@ static void setup_frame(int sig, struct target_sigaction 
*ka,
     env->gpr[3] = sig;
     env->gpr[4] = frame_addr + offsetof(struct target_sigframe, sctx);
 
-#if defined(TARGET_PPC64)
-    if (get_ppc64_abi(image) < 2) {
-        /* ELFv1 PPC64 function pointers are pointers to OPD entries. */
-        struct target_func_ptr *handler =
-            (struct target_func_ptr *)g2h(ka->_sa_handler);
-        env->nip = tswapl(handler->entry);
-        env->gpr[2] = tswapl(handler->toc);
-    } else {
-        /* ELFv2 PPC64 function pointers are entry points, but R12
-         * must also be set */
-        env->nip = tswapl((target_ulong) ka->_sa_handler);
-        env->gpr[12] = env->nip;
-    }
-#else
     env->nip = (target_ulong) ka->_sa_handler;
-#endif
 
     /* Signal handlers are entered in big-endian mode.  */
     env->msr &= ~(1ull << MSR_LE);
@@ -4817,6 +4863,7 @@ sigsegv:
     unlock_user_struct(frame, frame_addr, 1);
     force_sig(TARGET_SIGSEGV);
 }
+#endif /* !defined(TARGET_PPC64) */
 
 static void setup_rt_frame(int sig, struct target_sigaction *ka,
                            target_siginfo_t *info,
@@ -4914,6 +4961,7 @@ sigsegv:
 
 }
 
+#if !defined(TARGET_PPC64)
 long do_sigreturn(CPUPPCState *env)
 {
     struct target_sigcontext *sc = NULL;
@@ -4950,6 +4998,7 @@ sigsegv:
     force_sig(TARGET_SIGSEGV);
     return 0;
 }
+#endif /* !defined(TARGET_PPC64) */
 
 /* See arch/powerpc/kernel/signal_32.c.  */
 static int do_setcontext(struct target_ucontext *ucp, CPUPPCState *env, int 
sig)
@@ -5893,7 +5942,8 @@ static void handle_pending_signal(CPUArchState *cpu_env, 
int sig,
 #endif
         /* prepare the stack frame of the virtual CPU */
 #if defined(TARGET_ABI_MIPSN32) || defined(TARGET_ABI_MIPSN64) \
-    || defined(TARGET_OPENRISC) || defined(TARGET_TILEGX)
+        || defined(TARGET_OPENRISC) || defined(TARGET_TILEGX) \
+        || defined(TARGET_PPC64)
         /* These targets do not have traditional signals.  */
         setup_rt_frame(sig, sa, &k->info, &target_old_set, cpu_env);
 #else




reply via email to

[Prev in Thread] Current Thread [Next in Thread]