qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3] docs: add cpu-hotplug.txt


From: Dou Liyang
Subject: [Qemu-devel] [PATCH v3] docs: add cpu-hotplug.txt
Date: Mon, 15 Aug 2016 13:49:48 +0800

This document describes how to use cpu hotplug in QEMU.

Signed-off-by: Dou Liyang <address@hidden>
---
Change log v2 -> v3:
  From drew's advice:
    1. modify the examples.
    2. Fix some syntax.

Change log v1 -> v2:
  From Fam's advice:
    1. Fix some comment.

Change log v1:
  From Igor's advice:
    1. Remove any mentioning of apic-id from the document.
    2. Remove the "device_del qom_path" from the CPU hot-unplug.
    3. Fix some comment.

 docs/cpu-hotplug.txt | 127 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)
 create mode 100644 docs/cpu-hotplug.txt

diff --git a/docs/cpu-hotplug.txt b/docs/cpu-hotplug.txt
new file mode 100644
index 0000000..892505f
--- /dev/null
+++ b/docs/cpu-hotplug.txt
@@ -0,0 +1,127 @@
+QEMU CPU hotplug
+================
+
+This document explains how to use the CPU hotplug feature in QEMU,
+which regards the CPU as a device, using -device/device_add and
+device_del.
+
+QEMU support was merged for 2.7.
+
+Guest support is required for CPU hotplug to work.
+
+CPU hot-plug
+------------
+
+In order to be able to hotplug CPUs, QEMU has to be told the maximum
+number of CPUs which the guest can have. This is done at startup time
+by means of the -smp command-line option, which has the following
+format:
+
+ -smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads]
+       [,sockets=sockets]
+
+Where,
+
+ - "cpus"    sets the number of CPUs to 'n' [default=1].
+ - "maxcpus" sets the maximum number of CPUs, including offline VCPUs
+   for hotplug, etc.
+ - "cores"   sets the number of CPU cores on one socket.
+ - "threads" sets the number of threads on one CPU core.
+ - "sockets" sets the number of discrete sockets in the system. On
+   sPAPR, sockets have no real meaning, And it has no real effect.
+
+For example, the following command-line:
+
+ qemu [...] -smp 3,maxcpus=8,sockets=2,cores=2,threads=2
+
+Creates a guest with 3 VCPUs and it supports up to 8 VCPUs. The
+CPU topology is sockets (2) * cores (2) * threads (2) and can't be
+greater than maxcpus. When the guest is booted, the guest will see
+3 VCPUs. More on this below.
+
+Query possible available CPU objects
+------------------------------------
+
+The VCPUs should be hotplugged by socket/core/thread-id parameters
+describing the available CPU objects.
+
+Before adding the VCPUs, we should know those topology parameters,
+so that we can find the available location (socket,core,thread) for
+a new VCPU.
+
+There are two ways to obtain them:
+
+1. Using the properties advertised by QEMU via the QMP command
+"query-hotpluggable-cpus".
+2. Using the corresponding HMP command "info hotpluggable-cpus".
+
+For example, a monitor command can be used to list the possible CPU
+objects:
+
+  (qemu) info hotpluggable-cpus
+
+Select the hotpluggable CPUs including "CPUInstance Properties" for
+hotpluging. Such as this:
+
+  ...
+  type: "qemu64-x86_64-cpu"
+  vcpus_count: "1"
+  CPUInstance Properties:
+    socket-id: "0"
+    core-id: "1"
+    thread-id: "0"
+  ...
+
+Hotplug CPUs
+------------
+
+A monitor command can be used to hotplug CPUs:
+
+ - "device_add": creates a VCPU device and inserts it into the
+       specific place as a device
+
+For example, the following command adds a VCPU which has the id cpu1
+in the specific position of the guest's CPU sockets which was discussed
+earlier by using the socket/core/thread-id:
+
+  (qemu) device_add qemu64-x86_64-cpu,id=cpu1,socket-id=0,core-id=1,thread-id=1
+
+Where,
+
+ - "qemu64-x86_64-cpu" is the CPU model.
+ - "id" is the unique identifier in the device set. It is required.
+ - "socket-id/core-id/thread-id" represent the designated position
+   which is obtained form the above possible list of CPUs.
+
+It's also possible to start a guest with a cpu cold-plugged into a
+specific location (socket,core,thread).
+
+In the following command line example, a guest which has 3 VCPUs is
+created:
+
+ qemu  [...] -smp 1,maxcpus=8,sockets=2,cores=2,threads=2 \
+       -device qemu64-x86_64-cpu,id=cpu1,socket-id=1, \
+       core-id=1,thread-id=0 \
+       -device qemu64-x86_64-cpu,id=cpu2,socket-id=1, \
+       core-id=1,thread-id=1 \
+
+Two VCPUs are cold-plugged by "-device" parameter, which are in the
+same socket and core but with different thread-ids. After that, the
+guest has an additional five VCPUs to be hot-plugged when needed.
+
+CPU hot-unplug
+--------------
+
+In order to be able to hot unplug a CPU device, QEMU removes CPU
+devices by using the ids which were assigned when hotplugging the
+CPU device.
+
+A monitor command can be used to hot unplug CPUs:
+
+ - "device_del": deletes a CPU device
+
+For example, assuming that the CPU device with id "cpu1" exists and has
+been offline, the following command tries to remove it.
+
+  (qemu) device_del cpu1
+
-- 
2.5.5






reply via email to

[Prev in Thread] Current Thread [Next in Thread]