[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 568228] Re: /home/qemu-0.12.3/tcg/tcg.c:1367: tcg fata
|
From: |
pranith |
|
Subject: |
[Qemu-devel] [Bug 568228] Re: /home/qemu-0.12.3/tcg/tcg.c:1367: tcg fatal error |
|
Date: |
Fri, 02 Sep 2016 13:17:38 -0000 |
** Changed in: qemu
Status: New => Invalid
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/568228
Title:
/home/qemu-0.12.3/tcg/tcg.c:1367: tcg fatal error
Status in QEMU:
Invalid
Bug description:
I get the following error each time I start emulation in QEMU 0.12.3
on a Sun SunFire 280R running Debian Lenny 5.03 for Sparc64:
/home/qemu-0.12.3/tcg/tcg.c:1367: tcg fatal error
I had the same problem in Qemu 0.11.1.
Here are informations about my system, I am not a programmer so I
don't know what information to give, if you need more info just ask
me:
sunfire:/home# uname -a
Linux sunfire 2.6.26 #1 Thu Apr 8 17:09:17 EDT 2010 sparc64 GNU/Linux
sunfire:/home# dmesg
nges:
[ 0.000000] Normal 0 -> 130933
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0 -> 129023
[ 0.000000] 0: 129024 -> 130666
[ 0.000000] 0: 130796 -> 130803
[ 0.000000] 0: 130805 -> 130815
[ 0.000000] 0: 130818 -> 130826
[ 0.000000] 0: 130828 -> 130916
[ 0.000000] 0: 130919 -> 130933
[ 0.000000] On node 0 totalpages: 130792
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129896 pages, LIFO batch:15
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 129896
[ 0.000000] Kernel command line: root=/dev/sdb2 ro
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] clocksource: mult[c80000] shift[16]
[ 0.000000] clockevent: mult[147ae14] shift[32]
[ 380.165881] Console: colour dummy device 80x25
[ 380.183520] console handover: boot [earlyprom0] -> real [tty0]
[ 380.208131] Dentry cache hash table entries: 131072 (order: 7, 1048576
bytes)
[ 380.210503] Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
[ 380.235415] Memory: 1022064k available (4952k kernel code, 2064k data,
192k init) [fffff80000000000,000000003feea000]
[ 380.312667] Calibrating delay using timer specific routine.. 9.99 BogoMIPS
(lpj=19990)
[ 380.312839] Security Framework initialized
[ 380.312870] SELinux: Disabled at boot.
[ 380.312889] Capability LSM initialized
[ 380.312935] Mount-cache hash table entries: 512
[ 380.313505] Initializing cgroup subsys ns
[ 380.313524] Initializing cgroup subsys cpuacct
[ 380.313536] Initializing cgroup subsys devices
[ 380.314346] net_namespace: 1208 bytes
[ 380.314892] NET: Registered protocol family 16
[ 380.325288] PCI: Probing for controllers.
[ 380.325332] /address@hidden,700000: SCHIZO PCI Bus Module ver[4:0]
[ 380.325349] /address@hidden,700000: PCI IO[7ffef000000] MEM[7fe00000000]
[ 380.329864] /address@hidden,600000: SCHIZO PCI Bus Module ver[4:0]
[ 380.329881] /address@hidden,600000: PCI IO[7ffed000000] MEM[7fd00000000]
[ 380.334466] PCI: Scanning PBM /address@hidden,600000
[ 380.334976] PCI: Scanning PBM /address@hidden,700000
[ 380.336347] ebus0: [flashprom] [bbc] [ppm] [i2c -> (dimm-fru) (dimm-fru)
(dimm-fru) (dimm-fru) (nvram) (idprom)] [i2c -> (cpu-fru) (temperature)
(fan-control) (motherboard-fru) (i2c-bridge)] [beep] [rtc] [gpio] [pmc]
[floppy] [parallel] [serial]
[ 380.349031] usbcore: registered new interface driver usbfs
[ 380.349274] usbcore: registered new interface driver hub
[ 380.349452] usbcore: registered new device driver usb
[ 380.353275] /address@hidden,700000/address@hidden/address@hidden,300070:
Clock regs at 000007fe7e300070
[ 380.354631] NET: Registered protocol family 2
[ 380.356677] Switched to high resolution mode on CPU 0
[ 380.388803] IP route cache hash table entries: 8192 (order: 3, 65536 bytes)
[ 380.389510] TCP established hash table entries: 32768 (order: 6, 524288
bytes)
[ 380.391238] TCP bind hash table entries: 32768 (order: 5, 262144 bytes)
[ 380.392036] TCP: Hash tables configured (established 32768 bind 32768)
[ 380.392052] TCP reno registered
[ 380.400796] NET: Registered protocol family 1
[ 380.401078] checking if image is initramfs... it is
[ 381.658428] Freeing initrd memory: 5829k freed
[ 381.659077] Mini RTC Driver
[ 381.659365] /address@hidden,400000: US3 memory controller at
0000040000400000 [ACTIVE]
[ 381.660085] audit: initializing netlink socket (disabled)
[ 381.660134] type=2000 audit(1271905721.644:1): initialized
[ 381.660454] Total HugeTLB memory allocated, 0
[ 381.660756] VFS: Disk quotas dquot_6.5.1
[ 381.660865] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 381.661363] Installing knfsd (copyright (C) 1996 address@hidden).
[ 381.662280] NTFS driver 2.1.29 [Flags: R/W].
[ 381.662397] msgmni has been set to 2009
[ 381.662746] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 381.662775] io scheduler noop registered
[ 381.662788] io scheduler anticipatory registered
[ 381.662801] io scheduler deadline registered
[ 381.662844] io scheduler cfq registered (default)
[ 381.668602] Console: switching to colour frame buffer device 80x30
[ 381.672374] fb0: TVP4020 frame buffer device, memory = 8192K.
[ 381.681745] [drm] Initialized drm 1.1.0 20060810
[ 381.683020] f0086398: ttyS0 at MMIO 0x7fe7e400000 (irq = 10) is a SAB82532
V3.2
[ 381.686005] f0086398: ttyS1 at MMIO 0x7fe7e400040 (irq = 10) is a SAB82532
V3.2
[ 381.694246] brd: module loaded
[ 381.698234] loop: module loaded
[ 381.700507] sungem.c:v0.98 8/24/03 David S. Miller (address@hidden)
[ 381.703764] PHY ID: 18074c1, addr: 0
[ 381.704753] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:12:bb:58
[ 381.707196] eth0: Found Generic MII PHY
[ 381.709903] Uniform Multi-Platform E-IDE driver
[ 381.712557] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 381.719917] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 381.719963] ohci_hcd 0000:00:05.3: OHCI Host Controller
[ 381.723674] ohci_hcd 0000:00:05.3: new USB bus registered, assigned bus
number 1
[ 381.731670] ohci_hcd 0000:00:05.3: irq 13, io mem 0x7fe01000000
[ 381.792942] usb usb1: configuration #1 chosen from 1 choice
[ 381.797235] hub 1-0:1.0: USB hub found
[ 381.801563] hub 1-0:1.0: 4 ports detected
[ 381.909230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 381.913796] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 381.923701] usb usb1: Product: OHCI Host Controller
[ 381.928419] usb usb1: Manufacturer: Linux 2.6.26 ohci_hcd
[ 381.933108] usb usb1: SerialNumber: 0000:00:05.3
[ 381.937761] USB Universal Host Controller Interface driver v3.0
[ 381.942637] mice: PS/2 mouse device common for all mice
[ 382.164665] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 382.331310] usb 1-2: configuration #1 chosen from 1 choice
[ 382.336918] usb 1-2: New USB device found, idVendor=049f, idProduct=000e
[ 382.341070] usb 1-2: New USB device strings: Mfr=4, Product=20,
SerialNumber=0
[ 382.349921] usb 1-2: Product: Compaq Internet Keyboard
[ 382.354146] usb 1-2: Manufacturer: Chicony
[ 382.612663] usb 1-3: new full speed USB device using ohci_hcd and address 3
[ 382.777825] usb 1-3: configuration #1 chosen from 1 choice
[ 382.783275] usb 1-3: New USB device found, idVendor=058f, idProduct=6387
[ 382.787329] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 382.791996] usb 1-3: Product: Mass Storage
[ 382.795814] usb 1-3: Manufacturer: Generic
[ 382.799482] usb 1-3: SerialNumber: 0AC899D6
[ 383.056664] usb 1-4: new low speed USB device using ohci_hcd and address 4
[ 383.221349] usb 1-4: configuration #1 chosen from 1 choice
[ 383.226691] usb 1-4: New USB device found, idVendor=045e, idProduct=0039
[ 383.230537] usb 1-4: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[ 383.235076] usb 1-4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 383.238730] usb 1-4: Manufacturer: Microsoft
[ 383.248269] input: Chicony Compaq Internet Keyboard as /class/input/input0
[ 383.264794] input,hidraw0: USB HID v1.10 Keyboard [Chicony Compaq Internet
Keyboard] on usb-0000:00:05.3-2
[ 383.286678] input: Chicony Compaq Internet Keyboard as /class/input/input1
[ 383.304765] input,hidraw1: USB HID v1.10 Device [Chicony Compaq Internet
Keyboard] on usb-0000:00:05.3-2
[ 383.317738] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)
as /class/input/input2
[ 383.340859] input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft
5-Button Mouse with IntelliEye(TM)] on usb-0000:00:05.3-4
[ 383.349107] usbcore: registered new interface driver usbhid
[ 383.353153] usbhid: v2.6:USB HID core driver
[ 383.357245] Advanced Linux Sound Architecture Driver Version 1.0.16.
[ 383.402450] PCI: Enabling device: (0000:00:03.0), cmd 1
[ 384.100863] eth0: Link is up at 100 Mbps, full-duplex.
[ 384.846600] usbcore: registered new interface driver snd-usb-audio
[ 384.851077] ALSA device list:
[ 384.855394] #0: Ensoniq AudioPCI ENS1371 at 0x7ffef000500, irq 17
[ 384.861036] TCP cubic registered
[ 384.865480] NET: Registered protocol family 17
[ 384.870147] RPC: Registered udp transport module.
[ 384.874530] RPC: Registered tcp transport module.
[ 384.879100] registered taskstats version 1
[ 384.883476] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 386.429586] SCSI subsystem initialized
[ 386.509039] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[12]
MMIO=[7fe00120000-7fe001207ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 386.596175] QLogic Fibre Channel HBA Driver: 8.02.01-k4
[ 386.600382] PCI: Enabling device: (0001:00:04.0), cmd 3
[ 386.602464] qla2xxx 0001:00:04.0: Found an ISP2200, irq 20, iobase
0x000007fd00100000
[ 386.612339] qla2xxx 0001:00:04.0: Configuring PCI space...
[ 386.616586] qla2xxx 0001:00:04.0: Configure NVRAM parameters...
[ 386.714919] qla2xxx 0001:00:04.0: Inconsistent NVRAM detected:
checksum=0x0 id=<4>qla2xxx 0001:00:04.0: Falling back to functioning (yet
invalid -- WWPN) defaults.
[ 386.728340] qla2xxx 0001:00:04.0: Verifying loaded RISC code...
[ 386.734153] PCI: Enabling device: (0000:00:06.0), cmd 147
[ 386.735307] sym0: <875> rev 0x37 at pci 0000:00:06.0 irq 14
[ 386.826112] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
[ 386.837235] sym0: SCSI BUS has been reset.
[ 386.841214] scsi1 : sym-2.2.3
[ 386.847653] PCI: Enabling device: (0000:00:06.1), cmd 147
[ 386.848824] sym1: <875> rev 0x37 at pci 0000:00:06.1 irq 15
[ 386.939517] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
[ 386.950672] sym1: SCSI BUS has been reset.
[ 386.954818] scsi2 : sym-2.2.3
[ 386.965219] firmware: requesting ql2200_fw.bin
[ 387.039293] Initializing USB Mass Storage driver...
[ 387.043558] scsi3 : SCSI emulation for USB Mass Storage devices
[ 387.050004] usbcore: registered new interface driver usb-storage
[ 387.054012] USB Mass Storage support registered.
[ 387.057924] usb-storage: device found at 3
[ 387.057930] usb-storage: waiting for device to settle before scanning
[ 388.004887] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003bafffe12bb58]
[ 391.590521] scsi 1:0:6:0: CD-ROM TOSHIBA DVD-ROM SD-M1401 1009
PQ: 0 ANSI: 2
[ 391.599122] target1:0:6: Beginning Domain Validation
[ 391.603264] target1:0:6: asynchronous
[ 391.608968] target1:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
[ 391.614104] target1:0:6: Domain Validation skipping write tests
[ 391.618025] target1:0:6: Ending Domain Validation
[ 392.057675] usb-storage: device scan complete
[ 392.063643] scsi 3:0:0:0: Direct-Access Generic Flash Disk 8.07
PQ: 0 ANSI: 2
[ 394.008952] Driver 'sr' needs updating - please use bus_type methods
[ 394.017708] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 394.021916] Uniform CD-ROM driver Revision: 3.20
[ 394.026310] sr 1:0:6:0: Attached scsi CD-ROM sr0
[ 394.056732] sr 1:0:6:0: Attached scsi generic sg0 type 5
[ 394.357542] scsi 3:0:0:0: Attached scsi generic sg1 type 0
[ 394.413753] Driver 'sd' needs updating - please use bus_type methods
[ 394.437062] sd 3:0:0:0: [sda] 4103936 512-byte hardware sectors (2101 MB)
[ 394.450042] sd 3:0:0:0: [sda] Write Protect is off
[ 394.454315] sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 394.454322] sd 3:0:0:0: [sda] Assuming drive cache: write through
[ 394.481010] sd 3:0:0:0: [sda] 4103936 512-byte hardware sectors (2101 MB)
[ 394.493994] sd 3:0:0:0: [sda] Write Protect is off
[ 394.498261] sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 394.498268] sd 3:0:0:0: [sda] Assuming drive cache: write through
[ 394.502483] sda:
[ 394.548320] sd 3:0:0:0: [sda] Attached SCSI removable disk
[ 397.912726] qla2xxx 0001:00:04.0: Allocated (252 KB) for firmware dump...
[ 398.044667] qla2xxx 0001:00:04.0: LIP reset occured (f8ef).
[ 398.049170] scsi0 : qla2xxx
[ 398.054582] qla2xxx 0001:00:04.0:
[ 398.054586] QLogic Fibre Channel HBA Driver: 8.02.01-k4
[ 398.054590] QLogic QLA22xx -
[ 398.054592] ISP2200: PCI (66 MHz) @ 0001:00:04.0 hdma-, host#=0,
fw=2.02.08 TP
[ 398.091669] qla2xxx 0001:00:04.0: LIP occured (f8ef).
[ 398.097133] qla2xxx 0001:00:04.0: LOOP UP detected (1 Gbps).
[ 398.110704] scsi 0:0:0:0: Direct-Access SEAGATE ST336605FSUN36G 0638
PQ: 0 ANSI: 3
[ 398.126430] scsi 0:0:1:0: Direct-Access SEAGATE ST336605FSUN36G 0638
PQ: 0 ANSI: 3
[ 398.144907] scsi: waiting for bus probes to complete ...
[ 398.153043] sd 0:0:0:0: [sdb] 71132959 512-byte hardware sectors (36420 MB)
[ 398.159977] sd 0:0:0:0: [sdb] Write Protect is off
[ 398.164380] sd 0:0:0:0: [sdb] Mode Sense: db 00 10 08
[ 398.168750] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
supports DPO and FUA
[ 398.181593] sd 0:0:0:0: [sdb] 71132959 512-byte hardware sectors (36420 MB)
[ 398.188754] sd 0:0:0:0: [sdb] Write Protect is off
[ 398.193390] sd 0:0:0:0: [sdb] Mode Sense: db 00 10 08
[ 398.197775] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
supports DPO and FUA
[ 398.207949] sdb: sdb1 sdb2 sdb3 sdb4
[ 398.219180] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 398.223902] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 398.232492] sd 0:0:1:0: [sdc] 71132959 512-byte hardware sectors (36420 MB)
[ 398.239757] sd 0:0:1:0: [sdc] Write Protect is off
[ 398.244397] sd 0:0:1:0: [sdc] Mode Sense: db 00 10 08
[ 398.249021] sd 0:0:1:0: [sdc] Write cache: disabled, read cache: enabled,
supports DPO and FUA
[ 398.262681] sd 0:0:1:0: [sdc] 71132959 512-byte hardware sectors (36420 MB)
[ 398.270173] sd 0:0:1:0: [sdc] Write Protect is off
[ 398.274917] sd 0:0:1:0: [sdc] Mode Sense: db 00 10 08
[ 398.279543] sd 0:0:1:0: [sdc] Write cache: disabled, read cache: enabled,
supports DPO and FUA
[ 398.289888] sdc: sdc1 sdc3
[ 398.304581] sd 0:0:1:0: [sdc] Attached SCSI disk
[ 398.309417] sd 0:0:1:0: Attached scsi generic sg3 type 0
[ 398.768132] kjournald starting. Commit interval 5 seconds
[ 398.772864] EXT3-fs: mounted filesystem with ordered data mode.
[ 401.026534] udevd version 125 started
[ 405.141436] Adding 1566320k swap on /dev/sdb4. Priority:-1 extents:1
across:1566320k
[ 405.604286] EXT3 FS on sdb2, internal journal
[ 408.242503] eth0: Link is up at 100 Mbps, full-duplex.
[ 408.249685] eth0: Pause is disabled
[ 410.325778] NET: Registered protocol family 10
[ 410.330075] lo: Disabled Privacy Extensions
[ 414.287849] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 414.307535] NFSD: starting 90-second grace period
[ 418.763886] NET: Registered protocol family 5
[ 420.772658] eth0: no IPv6 routers present
[ 550.132380] ioctl32(xfce4-terminal:3010): Unknown cmd fd(8)
cmd(0000530b){t:'S';sz:0} arg(f7e8a380) on /dev/pts/0
[ 550.132405] ioctl32(xfce4-terminal:3010): Unknown cmd fd(8)
cmd(0000530b){t:'S';sz:0} arg(f7e8a388) on /dev/pts/0
[ 550.132420] ioctl32(xfce4-terminal:3010): Unknown cmd fd(8)
cmd(0000530b){t:'S';sz:0} arg(f7e8a390) on /dev/pts/0
[ 2388.411343] ioctl32(synaptic:3478): Unknown cmd fd(16)
cmd(0000530b){t:'S';sz:0} arg(f755a380) on /dev/pts/1
[ 2388.411368] ioctl32(synaptic:3478): Unknown cmd fd(16)
cmd(0000530b){t:'S';sz:0} arg(f755a388) on /dev/pts/1
[ 2388.411383] ioctl32(synaptic:3478): Unknown cmd fd(16)
cmd(0000530b){t:'S';sz:0} arg(f755a390) on /dev/pts/1
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/568228/+subscriptions
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [Bug 568228] Re: /home/qemu-0.12.3/tcg/tcg.c:1367: tcg fatal error,
pranith <=