qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 2/3] tests: add a simple /vhost-user/multiqueue test


From: Marc-André Lureau
Subject: [Qemu-devel] [PATCH 2/3] tests: add a simple /vhost-user/multiqueue test
Date: Fri, 9 Sep 2016 15:34:44 +0400

This test just checks that 2 virtio-net queues can be setup over
vhost-user and waits for them to be started.

Signed-off-by: Marc-André Lureau <address@hidden>
---
 tests/vhost-user-test.c | 109 ++++++++++++++++++++++++++++++++++++++++++++++--
 tests/Makefile.include  |   2 +-
 2 files changed, 107 insertions(+), 4 deletions(-)

diff --git a/tests/vhost-user-test.c b/tests/vhost-user-test.c
index ab91e16..ffdd398 100644
--- a/tests/vhost-user-test.c
+++ b/tests/vhost-user-test.c
@@ -20,6 +20,11 @@
 #include "libqos/pci-pc.h"
 #include "libqos/virtio-pci.h"
 
+#include "libqos/pci-pc.h"
+#include "libqos/virtio-pci.h"
+#include "libqos/malloc-pc.h"
+#include "hw/virtio/virtio-net.h"
+
 #include <linux/vhost.h>
 #include <linux/virtio_ids.h>
 #include <linux/virtio_net.h>
@@ -50,6 +55,7 @@
 #define VHOST_MEMORY_MAX_NREGIONS    8
 
 #define VHOST_USER_F_PROTOCOL_FEATURES 30
+#define VHOST_USER_PROTOCOL_F_MQ 0
 #define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
 
 #define VHOST_LOG_PAGE 0x1000
@@ -72,6 +78,7 @@ typedef enum VhostUserRequest {
     VHOST_USER_SET_VRING_ERR = 14,
     VHOST_USER_GET_PROTOCOL_FEATURES = 15,
     VHOST_USER_SET_PROTOCOL_FEATURES = 16,
+    VHOST_USER_GET_QUEUE_NUM = 17,
     VHOST_USER_SET_VRING_ENABLE = 18,
     VHOST_USER_MAX
 } VhostUserRequest;
@@ -136,6 +143,7 @@ typedef struct TestServer {
     int log_fd;
     uint64_t rings;
     bool test_fail;
+    int queues;
 } TestServer;
 
 static const char *tmpfs;
@@ -281,6 +289,9 @@ static void chr_read(void *opaque, const uint8_t *buf, int 
size)
         msg.size = sizeof(m.payload.u64);
         msg.payload.u64 = 0x1ULL << VHOST_F_LOG_ALL |
             0x1ULL << VHOST_USER_F_PROTOCOL_FEATURES;
+        if (s->queues > 1) {
+            msg.payload.u64 |= 0x1ULL << VIRTIO_NET_F_MQ;
+        }
         p = (uint8_t *) &msg;
         qemu_chr_fe_write_all(chr, p, VHOST_USER_HDR_SIZE + msg.size);
         break;
@@ -295,6 +306,9 @@ static void chr_read(void *opaque, const uint8_t *buf, int 
size)
         msg.flags |= VHOST_USER_REPLY_MASK;
         msg.size = sizeof(m.payload.u64);
         msg.payload.u64 = 1 << VHOST_USER_PROTOCOL_F_LOG_SHMFD;
+        if (s->queues > 1) {
+            msg.payload.u64 |= 1 << VHOST_USER_PROTOCOL_F_MQ;
+        }
         p = (uint8_t *) &msg;
         qemu_chr_fe_write_all(chr, p, VHOST_USER_HDR_SIZE + msg.size);
         break;
@@ -307,7 +321,7 @@ static void chr_read(void *opaque, const uint8_t *buf, int 
size)
         p = (uint8_t *) &msg;
         qemu_chr_fe_write_all(chr, p, VHOST_USER_HDR_SIZE + msg.size);
 
-        assert(msg.payload.state.index < 2);
+        assert(msg.payload.state.index < s->queues * 2);
         s->rings &= ~(0x1ULL << msg.payload.state.index);
         break;
 
@@ -347,10 +361,18 @@ static void chr_read(void *opaque, const uint8_t *buf, 
int size)
         break;
 
     case VHOST_USER_SET_VRING_BASE:
-        assert(msg.payload.state.index < 2);
+        assert(msg.payload.state.index < s->queues * 2);
         s->rings |= 0x1ULL << msg.payload.state.index;
         break;
 
+    case VHOST_USER_GET_QUEUE_NUM:
+        msg.flags |= VHOST_USER_REPLY_MASK;
+        msg.size = sizeof(m.payload.u64);
+        msg.payload.u64 = s->queues;
+        p = (uint8_t *) &msg;
+        qemu_chr_fe_write_all(chr, p, VHOST_USER_HDR_SIZE + msg.size);
+        break;
+
     default:
         break;
     }
@@ -397,6 +419,7 @@ static TestServer *test_server_new(const gchar *name)
     g_cond_init(&server->data_cond);
 
     server->log_fd = -1;
+    server->queues = 1;
 
     return server;
 }
@@ -648,7 +671,6 @@ static void test_migrate(void)
     global_qtest = global;
 }
 
-#ifdef CONFIG_HAS_GLIB_SUBPROCESS_TESTS
 static void wait_for_rings_started(TestServer *s, size_t count)
 {
     gint64 end_time;
@@ -666,6 +688,7 @@ static void wait_for_rings_started(TestServer *s, size_t 
count)
     g_mutex_unlock(&s->data_mutex);
 }
 
+#ifdef CONFIG_HAS_GLIB_SUBPROCESS_TESTS
 static gboolean
 reconnect_cb(gpointer user_data)
 {
@@ -753,6 +776,85 @@ static void test_connect_fail(void)
 
 #endif
 
+static QVirtioPCIDevice *virtio_net_pci_init(QPCIBus *bus, int slot)
+{
+    QVirtioPCIDevice *dev;
+
+    dev = qvirtio_pci_device_find(bus, VIRTIO_ID_NET);
+    g_assert(dev != NULL);
+    g_assert_cmphex(dev->vdev.device_type, ==, VIRTIO_ID_NET);
+
+    qvirtio_pci_device_enable(dev);
+    qvirtio_reset(&qvirtio_pci, &dev->vdev);
+    qvirtio_set_acknowledge(&qvirtio_pci, &dev->vdev);
+    qvirtio_set_driver(&qvirtio_pci, &dev->vdev);
+
+    return dev;
+}
+
+static void driver_init(const QVirtioBus *bus, QVirtioDevice *dev)
+{
+    uint32_t features;
+
+    features = qvirtio_get_features(bus, dev);
+    features = features & ~(QVIRTIO_F_BAD_FEATURE |
+                            (1u << VIRTIO_RING_F_INDIRECT_DESC) |
+                            (1u << VIRTIO_RING_F_EVENT_IDX));
+    qvirtio_set_features(bus, dev, features);
+
+    qvirtio_set_driver_ok(bus, dev);
+}
+
+#define PCI_SLOT                0x04
+
+static void test_multiqueue(void)
+{
+    const int queues = 2;
+    TestServer *s = test_server_new("mq");
+    QVirtioPCIDevice *dev;
+    QPCIBus *bus;
+    QVirtQueuePCI *vq[queues * 2];
+    QGuestAllocator *alloc;
+    char *cmd;
+    int i;
+
+    s->queues = queues;
+    test_server_listen(s);
+
+    cmd = g_strdup_printf(QEMU_CMD_MEM QEMU_CMD_CHR QEMU_CMD_NETDEV 
",queues=%d "
+                          "-device 
virtio-net-pci,netdev=net0,mq=on,vectors=%d",
+                          512, 512, root, s->chr_name,
+                          s->socket_path, "", s->chr_name,
+                          queues, queues * 2 + 2);
+    qtest_start(cmd);
+    g_free(cmd);
+
+    bus = qpci_init_pc();
+    dev = virtio_net_pci_init(bus, PCI_SLOT);
+
+    alloc = pc_alloc_init();
+    for (i = 0; i < queues * 2; i++) {
+        vq[i] = (QVirtQueuePCI *)qvirtqueue_setup(&qvirtio_pci, &dev->vdev,
+                                              alloc, i);
+    }
+
+    driver_init(&qvirtio_pci, &dev->vdev);
+    wait_for_rings_started(s, queues * 2);
+
+    /* End test */
+    for (i = 0; i < queues * 2; i++) {
+        qvirtqueue_cleanup(&qvirtio_pci, &vq[i]->vq, alloc);
+    }
+    pc_alloc_uninit(alloc);
+    qvirtio_pci_device_disable(dev);
+    g_free(dev->pdev);
+    g_free(dev);
+    qpci_free_pc(bus);
+    qtest_end();
+
+    test_server_free(s);
+}
+
 int main(int argc, char **argv)
 {
     QTestState *s = NULL;
@@ -798,6 +900,7 @@ int main(int argc, char **argv)
 
     qtest_add_data_func("/vhost-user/read-guest-mem", server, read_guest_mem);
     qtest_add_func("/vhost-user/migrate", test_migrate);
+    qtest_add_func("/vhost-user/multiqueue", test_multiqueue);
 #ifdef CONFIG_HAS_GLIB_SUBPROCESS_TESTS
     qtest_add_func("/vhost-user/reconnect/subprocess",
                    test_reconnect_subprocess);
diff --git a/tests/Makefile.include b/tests/Makefile.include
index e3a3266..db5c31a 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -642,7 +642,7 @@ tests/usb-hcd-ehci-test$(EXESUF): tests/usb-hcd-ehci-test.o 
$(libqos-usb-obj-y)
 tests/usb-hcd-xhci-test$(EXESUF): tests/usb-hcd-xhci-test.o $(libqos-usb-obj-y)
 tests/pc-cpu-test$(EXESUF): tests/pc-cpu-test.o
 tests/postcopy-test$(EXESUF): tests/postcopy-test.o
-tests/vhost-user-test$(EXESUF): tests/vhost-user-test.o qemu-char.o 
qemu-timer.o $(qtest-obj-y) $(test-io-obj-y) $(libqos-virtio-obj-y)
+tests/vhost-user-test$(EXESUF): tests/vhost-user-test.o qemu-char.o 
qemu-timer.o $(qtest-obj-y) $(test-io-obj-y) $(libqos-virtio-obj-y) 
$(libqos-pc-obj-y)
 tests/qemu-iotests/socket_scm_helper$(EXESUF): 
tests/qemu-iotests/socket_scm_helper.o
 tests/test-qemu-opts$(EXESUF): tests/test-qemu-opts.o $(test-util-obj-y)
 tests/test-write-threshold$(EXESUF): tests/test-write-threshold.o 
$(test-block-obj-y)
-- 
2.10.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]