[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v17 0/9] 8bit AVR cores
|
From: |
Michael Rolnik |
|
Subject: |
Re: [Qemu-devel] [PATCH v17 0/9] 8bit AVR cores |
|
Date: |
Fri, 16 Sep 2016 09:45:20 +0300 |
ping
On Thu, Aug 18, 2016 at 3:07 PM, Michael Rolnik <address@hidden> wrote:
> This series of patches adds 8bit AVR cores to QEMU.
> All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully
> tested yet.
> However I was able to execute simple code with functions. e.g fibonacci
> calculation.
> This series of patches include a non real, sample board.
> No fuses support yet. PC is set to 0 at reset.
>
> the patches include the following
> 1. just a basic 8bit AVR CPU, without instruction decoding or translation
> 2. CPU features which allow define the following 8bit AVR cores
> avr1
> avr2 avr25
> avr3 avr31 avr35
> avr4
> avr5 avr51
> avr6
> xmega2 xmega4 xmega5 xmega6 xmega7
> 3. a definition of sample machine with SRAM, FLASH and CPU which allows to
> execute simple code
> 4. encoding for all AVR instructions
> 5. interrupt handling
> 6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
> 7. a decoder which given an opcode decides what istruction it is
> 8. translation of AVR instruction into TCG
> 9. all features together
>
> changes since v3
> 1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff)
> for faster address manipulaton
> 2. ffs changed to ctz32
> 3. duplicate code removed at avr_cpu_do_interrupt
> 4. using andc instead of not + and
> 5. fixing V flag calculation in varios instructions
> 6. freeing local variables in PUSH
> 7. tcg_const_local_i32 -> tcg_const_i32
> 8. using sextract32 instead of my implementation
> 9. fixing BLD instruction
> 10.xor(r) instead of 0xff - r at COM
> 11.fixing MULS/MULSU not to modify inputs' content
> 12.using SUB for NEG
> 13.fixing tcg_gen_qemu_ld/st call in XCH
>
> changes since v4
> 1. target is now defined as big endian in order to optimize
> push_ret/pop_ret
> 2. all style warnings are fixed
> 3. adding cpu_set/get_sreg functions
> 4. simplifying gen_goto_tb as there is no real paging
> 5. env->pc -> env->pc_w
> 6. making flag dump more compact
> 7. more spacing
> 8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
> 9. removing avr_set_feature
> 10. SPL/SPH set bug fix
> 11. switching stb_phys to cpu_stb_data
> 12. cleaning up avr_decode
> 13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
> 14. saving CPU features (savevm)
>
> changes since v5
> 1. BLD bug fix
> 2. decoder generator is added
>
> chages since v6
> 1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_
> cpu_gdb_write_register
> 2. configure the target as little endian because otherwise GDB does not
> work
> 3. fixing and testing gen_push_ret/gen_pop_ret
>
> changes since v7
> 1. folding back v6
> 2. logging at helper_outb and helper_inb are done for non supported yet
> registers only
> 3. MAINTAINERS updated
>
> changes since v8
> 1. removing hw/avr from hw/Makefile.obj as it should not be built for all
> 2. making linux compilable
> 3. testing on
> a. Mac, Apple LLVM version 7.0.0
> b. Ubuntu 12.04, gcc 4.9.2
> c. Fedora 23, gcc 5.3.1
> 4. folding back some patches
> 5. translation bug fixes for ORI, CPI, XOR instructions
> 6. propper handling of cpu register writes though memory
>
> changes since v9
> 1. removing forward declarations of static functions
> 2. disabling debug prints
> 3. switching to case range instead of if else if ...
> 4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any
> device
> 5. commenst about sample board and sample IO device added
> 6. sample board description is more descriptive now
> 7. memory_region_allocate_system_memory is used to create RAM
> 8. now there are helper_fullrd & helper_fullwr when LD/ST try to access
> registers
>
> changes since v10
> 1. movig back fullwr & fullrd into the commit where outb and inb were
> introduced
> 2. changing tlb_fill function signature
> 3. adding empty line between functions
> 4. adding newline on the last line of the file
> 5. using tb->flags to generae full access ST/LD instructions
> 6. fixing SBRC bug
> 7. folding back 10th commit
> 8. whenever a new file is introduced it's added to Makefile.objs
>
> changes since v11
> 1. updating to v2.7.0-rc
> 2. removing assignment to env->fullacc from gen_intermediate_code
>
> changes since v12
> 1. fixing spacing
> 2. fixing get/put_segment functions
> 3. removing target-avr/machine.h file
> 4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
> 5. comment spelling
> 6. removing hw/avr/sample_io.c
> 7. char const* -> const char*
> 8. proper ram allocation
> 9. fixing breakpoint functionality.
> 10.env1 -> env
> 11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions
> 12.any cpu is removed
> 12.feature bits are not saved into vm state
>
> changes since v13
> 1. rebasing to v2.7.0-rc1
>
> changes since v14
> 1. I made self review with git gui tool. (I did not know such a thing
> exists)
> 2. removing all double/tripple spaces
> 3. removing comment reference to SampleIO
> 4. folding back some changes, so there is not deleted lines in my code
> 5. moving avr configuration, within configure file, before chris
>
> changes since v15
> 1. removing IO registers cache from CPU
> 2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
> 3. implementing CBIC/SBIC as read(helper_inb), check, branch
> 4. adding missing tcg_temp_free_i32 for tcg_const_i32
>
> changes since v16
> 1. removing EXT IO registers knoledge from CPU. These registers are
> accessible
> by LD/ST only. CPU has no interest in them
>
>
> Michael Rolnik (9):
> target-avr: AVR cores support is added.
> target-avr: adding AVR CPU features/flavors
> target-avr: adding a sample AVR board
> target-avr: adding instructions encodings
> target-avr: adding AVR interrupt handling
> target-avr: adding helpers for IN, OUT, SLEEP, WBR & unsupported
> instructions
> target-avr: adding instruction translation
> target-avr: instruction decoder generator
> target-avr: adding instruction decoder
>
> MAINTAINERS | 6 +
> arch_init.c | 2 +
> configure | 5 +
> default-configs/avr-softmmu.mak | 21 +
> hw/avr/Makefile.objs | 21 +
> hw/avr/sample.c | 112 ++
> include/disas/bfd.h | 6 +
> include/sysemu/arch_init.h | 1 +
> target-avr/Makefile.objs | 26 +
> target-avr/cpu-qom.h | 85 +
> target-avr/cpu.c | 603 +++++++
> target-avr/cpu.h | 238 +++
> target-avr/cpugen/CMakeLists.txt | 38 +
> target-avr/cpugen/README.md | 17 +
> target-avr/cpugen/cpu/avr.yaml | 214 +++
> target-avr/cpugen/src/CMakeLists.txt | 63 +
> target-avr/cpugen/src/cpugen.cpp | 458 +++++
> target-avr/cpugen/src/utils.cpp | 27 +
> target-avr/cpugen/src/utils.h | 79 +
> target-avr/cpugen/xsl/decode.c.xsl | 103 ++
> target-avr/cpugen/xsl/translate-inst.h.xsl | 118 ++
> target-avr/cpugen/xsl/utils.xsl | 108 ++
> target-avr/decode.c | 693 ++++++++
> target-avr/gdbstub.c | 86 +
> target-avr/helper.c | 392 +++++
> target-avr/helper.h | 29 +
> target-avr/machine.c | 115 ++
> target-avr/translate-inst.c | 2641
> ++++++++++++++++++++++++++++
> target-avr/translate-inst.h | 805 +++++++++
> target-avr/translate.c | 266 +++
> target-avr/translate.h | 116 ++
> 31 files changed, 7494 insertions(+)
> create mode 100644 default-configs/avr-softmmu.mak
> create mode 100644 hw/avr/Makefile.objs
> create mode 100644 hw/avr/sample.c
> create mode 100644 target-avr/Makefile.objs
> create mode 100644 target-avr/cpu-qom.h
> create mode 100644 target-avr/cpu.c
> create mode 100644 target-avr/cpu.h
> create mode 100644 target-avr/cpugen/CMakeLists.txt
> create mode 100644 target-avr/cpugen/README.md
> create mode 100644 target-avr/cpugen/cpu/avr.yaml
> create mode 100644 target-avr/cpugen/src/CMakeLists.txt
> create mode 100644 target-avr/cpugen/src/cpugen.cpp
> create mode 100644 target-avr/cpugen/src/utils.cpp
> create mode 100644 target-avr/cpugen/src/utils.h
> create mode 100644 target-avr/cpugen/xsl/decode.c.xsl
> create mode 100644 target-avr/cpugen/xsl/translate-inst.h.xsl
> create mode 100644 target-avr/cpugen/xsl/utils.xsl
> create mode 100644 target-avr/decode.c
> create mode 100644 target-avr/gdbstub.c
> create mode 100644 target-avr/helper.c
> create mode 100644 target-avr/helper.h
> create mode 100644 target-avr/machine.c
> create mode 100644 target-avr/translate-inst.c
> create mode 100644 target-avr/translate-inst.h
> create mode 100644 target-avr/translate.c
> create mode 100644 target-avr/translate.h
>
> --
> 2.4.9 (Apple Git-60)
>
>
--
Best Regards,
Michael Rolnik