qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [Bug 1622582] Re: Can't install Windows 7 with q35 (SATA)


From: John Snow
Subject: [Qemu-devel] [Bug 1622582] Re: Can't install Windows 7 with q35 (SATA)
Date: Thu, 22 Sep 2016 17:36:34 -0000

I can reproduce with the English version:
7b7af5fe3a01e9fd76de4dacb45a796b  
en_windows_7_professional_x64_dvd_x15-65805.iso

I can't reproduce with SP1, however:
ed15956fe33c13642a6d2cb2c7aa9749  
en_windows_7_professional_with_sp1_x64_dvd_u_676939.iso

We might be bumping up against a driver fix, but I still don't know the
root cause just yet. I'll have to investigate. It looks like Windows 7
submits a flurry of NCQ writes, then hangs for a while, then submits an
ATA SET FEATURES request, then another flurry of NCQ writes, then hangs
for a while again; rinse repeat.

It doesn't LOOK as if QEMU is dropping any requests, but I will have to
investigate to see if there's anything improper happening...

In the meantime, for you and anyone else who comes across this problem,
I recommend using Windows 7 Professional x64 SP1 if at all possible!

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1622582

Title:
  Can't install Windows 7 with q35 (SATA)

Status in QEMU:
  Confirmed

Bug description:
  I'm trying to install Windows 7 on a q35 machine on a "SATA disk". If
  I use q35 the installation is extremely slow. With extremely slow I
  mean, that the first few minutes (10-15 minutes) on the second
  installation step (copying files to disk) nothing happens. Than there
  is some progress, maybe until 9% and than there is "silence" for
  another 10 minutes or so. Therefore I used iotop (with --only option)
  in order to see, if there are any disk operations. But as I mentioned,
  only a few times qemu writes something to disk (with about < 1M/s).
  But most of the time there is nothing from qemu. Therefore the
  installation lasts over an hour. But even worse, after installation I
  can't boot Windows. Windows-Start-Manager tells me, that windows
  couldn't be loaded because the kernel is missing or corrupt (Status
  0xc0000221, File: \Windows\system32\ntoskrnl.exe). If I use IDE on q35
  or pc-i440fx-2.6 everything works fine. There is a continuous
  installation progress and iotop shows continuous disk writes with max
  30M/s (but also 5M/s and other values...).

  I've tried qemu 2.6.0, 2.6.1 and 2.7.0 (all versions from git).

  My host machine: 
  Ubuntu 14.04.5 LTS
  3.13.0-95-generic #142-Ubuntu SMP Fri Aug 12 17:00:09 UTC 2016 x86_64 x86_64 
x86_64 GNU/Linux
  Intel(R) Core(TM) i5-3470 CPU
  16 GB RAM

  
  I used the following commands:

  "Standard" command
  qemu-system-x86_64 -m 2048 -machine q35,accel=kvm -cpu host,kvm=off -smp 
1,sockets=1,cores=1,threads=1 -enable-kvm -hda win7_qemu_standard_q35.qcow2 
-cdrom win7proX64.iso -boot order=d

  I think by using -hda sata will be used?!?

  With explicit ahci:
  qemu-system-x86_64 -m 2048 -machine q35,accel=kvm -cpu host,kvm=off -smp 
1,sockets=1,cores=1,threads=1 -enable-kvm -drive 
file=win7_qemu_standard_q35.qcow2,media=disk,if=none,id=sata-disk -device 
ich9-ahci,id=ahci -device ide-drive,drive=sata-disk,bus=ahci.0 -drive 
file=win7proX64.iso,media=cdrom,if=none,id=sata-cdrom -device 
ide-cd,drive=sata-cdrom,bus=ahci.1 -boot order=d

  I don't know if this is totally correct, because it's a little bit
  weird that I have to use ide-drive on a ich9 bus.

  Without kvm there is a continious disk write with 100 K/s - 5 M/s (works only 
with qemu 2.7.0, otherwise I get a 0x000000D1 bluescreen on the setup start 
screen):
  qemu-system-x86_64 -m 2048 -machine q35 -cpu IvyBridge -hda 
win7_qemu_standard_q35.qcow2 -cdrom win7proX64.iso -boot order=d

  But with all three commands the installed Windows is not working,
  because always the same error occurs: windows couldn't be loaded
  because kernel is missing or corrupt

  Interestingly both commands ("standard" command and with explicit
  ahci) works very well with a Windows 10 installation.

  In my opinion it's a "SATA problem", because if I use e.g. piix4-ide instead 
of ich9-ahci it works:
  qemu-system-x86_64 -m 2048 -machine q35,accel=kvm -cpu host,kvm=off -smp 
1,sockets=1,cores=1,threads=1 -enable-kvm -drive 
file=win7_qemu_standard_q35.qcow2,media=disk,if=none,id=ide-disk -device 
piix4-ide,id=ide -device ide-drive,drive=ide-disk,bus=ide.0 -drive 
file=win7proX64.iso,media=cdrom,if=none,id=ide-cdrom -device 
ide-cd,drive=ide-cdrom,bus=ide.1 -boot order=d

  With this command there is a continuous disk write and the
  installation is bootable.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1622582/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]