[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 04/12] vfio/pci: Pass an error object to vfio
From: |
Auger Eric |
Subject: |
Re: [Qemu-devel] [PATCH v2 04/12] vfio/pci: Pass an error object to vfio_intx_enable |
Date: |
Fri, 30 Sep 2016 15:33:28 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.1.1 |
Markus,
On 22/09/2016 18:27, Markus Armbruster wrote:
> Eric Auger <address@hidden> writes:
>
>> Pass an error object to prepare for migration to VFIO-PCI realize.
>>
>> The error object is propagated downto vfio_intx_enable_kvm
>
> down to vfio_intx_enable_kvm().
>
> (feel free to omit the () I automatically add after a function name)
>
>> vfio_intx_update which calls vfio_intx_enable_kvm and
>> vfio_msi_disable_common/vfio_pci_post_reset which calls vfio_intx_enable
I took into account the rewording suggestions.
>
> Suggest: The three other callers vfio_intx_update,
> vfio_msi_disable_common() and vfio_pci_post_reset()
>
>> do not propagate the error and simply call error_reportf_err with the
>> ERR_PREFIX formatting.
>>
>> Signed-off-by: Eric Auger <address@hidden>
>>
>> ---
>>
>> v2: creation
>> ---
>> hw/vfio/pci.c | 39 +++++++++++++++++++++++++++------------
>> 1 file changed, 27 insertions(+), 12 deletions(-)
>>
>> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
>> index b35925a..f67eec4 100644
>> --- a/hw/vfio/pci.c
>> +++ b/hw/vfio/pci.c
>> @@ -100,7 +100,7 @@ static void vfio_intx_eoi(VFIODevice *vbasedev)
>> vfio_unmask_single_irqindex(vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
>> }
>>
>> -static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev)
>> +static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
>> {
>> #ifdef CONFIG_KVM
>> struct kvm_irqfd irqfd = {
>> @@ -126,7 +126,7 @@ static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev)
>>
>> /* Get an eventfd for resample/unmask */
>> if (event_notifier_init(&vdev->intx.unmask, 0)) {
>> - error_report("vfio: Error: event_notifier_init failed eoi");
>> + error_setg(errp, "event_notifier_init failed eoi");
>> goto fail;
>> }
>>
>> @@ -134,7 +134,7 @@ static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev)
>> irqfd.resamplefd = event_notifier_get_fd(&vdev->intx.unmask);
>>
>> if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
>> - error_report("vfio: Error: Failed to setup resample irqfd: %m");
>> + error_setg_errno(errp, errno, "failed to setup resample irqfd");
>> goto fail_irqfd;
>> }
>>
>> @@ -153,7 +153,7 @@ static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev)
>> ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
>> g_free(irq_set);
>> if (ret) {
>> - error_report("vfio: Error: Failed to setup INTx unmask fd: %m");
>> + error_setg_errno(errp, -ret, "failed to setup INTx unmask fd");
>> goto fail_vfio;
>> }
>>
>> @@ -222,6 +222,7 @@ static void vfio_intx_update(PCIDevice *pdev)
>> {
>> VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
>> PCIINTxRoute route;
>> + Error *err = NULL;
>>
>> if (vdev->interrupt != VFIO_INT_INTx) {
>> return;
>> @@ -244,18 +245,22 @@ static void vfio_intx_update(PCIDevice *pdev)
>> return;
>> }
>>
>> - vfio_intx_enable_kvm(vdev);
>> + vfio_intx_enable_kvm(vdev, &err);
>> + if (err) {
>> + error_reportf_err(err, ERR_PREFIX, vdev->vbasedev.name);
>> + }
>>
>> /* Re-enable the interrupt in cased we missed an EOI */
>> vfio_intx_eoi(&vdev->vbasedev);
>> }
>
> Nate that this function now permits callers to detect failure.
There was error_report before in vfio_intx_enable_kvm but indeed testing
vfio_intx_enable_kvm()'s *errp now makes possible to detect issues.
>
>>
>> -static int vfio_intx_enable(VFIOPCIDevice *vdev)
>> +static int vfio_intx_enable(VFIOPCIDevice *vdev, Error **errp)
>> {
>> uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1);
>> int ret, argsz;
>> struct vfio_irq_set *irq_set;
>> int32_t *pfd;
>> + Error *err = NULL;
>>
>> if (!pin) {
>> return 0;
>> @@ -279,7 +284,7 @@ static int vfio_intx_enable(VFIOPCIDevice *vdev)
>>
>> ret = event_notifier_init(&vdev->intx.interrupt, 0);
>> if (ret) {
>> - error_report("vfio: Error: event_notifier_init failed");
>> + error_setg_errno(errp, -ret, "event_notifier_init failed");
>> return ret;
>> }
>>
>> @@ -299,13 +304,14 @@ static int vfio_intx_enable(VFIOPCIDevice *vdev)
>> ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
>> g_free(irq_set);
>> if (ret) {
>> - error_report("vfio: Error: Failed to setup INTx fd: %m");
>> + error_setg_errno(errp, -ret, "failed to setup INTx fd");
>> qemu_set_fd_handler(*pfd, NULL, NULL, vdev);
>> event_notifier_cleanup(&vdev->intx.interrupt);
>> return -errno;
>> }
>>
>> - vfio_intx_enable_kvm(vdev);
>> + vfio_intx_enable_kvm(vdev, &err);
>> + error_propagate(errp, err);
>
> This wasn't an error before. Bug fix or regression?
Thanks for catching this. It is a regression since in case KVM setup
fails we revert to userspace handled eventfds.
I replaced that by a warning instead.
Thanks!
Eric
>
> Since you don't examine err, you should simply
>
> vfio_intx_enable_kvm(errp)
>
>> vdev->interrupt = VFIO_INT_INTx;
>>
>> @@ -707,6 +713,7 @@ retry:
>>
>> static void vfio_msi_disable_common(VFIOPCIDevice *vdev)
>> {
>> + Error *err = NULL;
>> int i;
>>
>> for (i = 0; i < vdev->nr_vectors; i++) {
>> @@ -726,7 +733,10 @@ static void vfio_msi_disable_common(VFIOPCIDevice *vdev)
>> vdev->nr_vectors = 0;
>> vdev->interrupt = VFIO_INT_NONE;
>>
>> - vfio_intx_enable(vdev);
>> + vfio_intx_enable(vdev, &err);
>> + if (err) {
>> + error_reportf_err(err, ERR_PREFIX, vdev->vbasedev.name);
>> + }
>> }
>>
>> static void vfio_msix_disable(VFIOPCIDevice *vdev)
>> @@ -1908,7 +1918,12 @@ static void vfio_pci_pre_reset(VFIOPCIDevice *vdev)
>>
>> static void vfio_pci_post_reset(VFIOPCIDevice *vdev)
>> {
>> - vfio_intx_enable(vdev);
>> + Error *err = NULL;
>> +
>> + vfio_intx_enable(vdev, &err);
>> + if (err) {
>> + error_reportf_err(err, ERR_PREFIX, vdev->vbasedev.name);
>> + }
>> }
>>
>> static bool vfio_pci_host_match(PCIHostDeviceAddress *addr, const char
>> *name)
>> @@ -2722,7 +2737,7 @@ static int vfio_initfn(PCIDevice *pdev)
>> vdev->intx.mmap_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
>> vfio_intx_mmap_enable,
>> vdev);
>> pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_intx_update);
>> - ret = vfio_intx_enable(vdev);
>> + ret = vfio_intx_enable(vdev, &err);
>> if (ret) {
>> goto out_teardown;
>> }
>
- [Qemu-devel] [PATCH v2 00/12] Convert VFIO-PCI to realize, Eric Auger, 2016/09/20
- [Qemu-devel] [PATCH v2 01/12] vfio/pci: Use local error object in vfio_initfn, Eric Auger, 2016/09/20
- [Qemu-devel] [PATCH v2 02/12] vfio/pci: Pass an error object to vfio_populate_device, Eric Auger, 2016/09/20
- [Qemu-devel] [PATCH v2 03/12] vfio/pci: Pass an error object to vfio_msix_early_setup, Eric Auger, 2016/09/20
- [Qemu-devel] [PATCH v2 04/12] vfio/pci: Pass an error object to vfio_intx_enable, Eric Auger, 2016/09/20
- [Qemu-devel] [PATCH v2 05/12] vfio/pci: Pass an error object to vfio_add_capabilities, Eric Auger, 2016/09/20
- [Qemu-devel] [PATCH v2 06/12] vfio/pci: Pass an error object to vfio_pci_igd_opregion_init, Eric Auger, 2016/09/20
- [Qemu-devel] [PATCH v2 07/12] vfio: Pass an error object to vfio_get_group, Eric Auger, 2016/09/20
- [Qemu-devel] [PATCH v2 08/12] vfio: Pass an error object to vfio_get_device, Eric Auger, 2016/09/20
- [Qemu-devel] [PATCH v2 09/12] vfio/pci: Conversion to realize, Eric Auger, 2016/09/20