[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4] fsdev: add IO throttle support to fsdev devi
From: |
Greg Kurz |
Subject: |
Re: [Qemu-devel] [PATCH v4] fsdev: add IO throttle support to fsdev devices |
Date: |
Thu, 20 Oct 2016 17:24:10 +0200 |
On Thu, 20 Oct 2016 16:18:16 +0200
Pradeep Jagadeesh <address@hidden> wrote:
> On 10/7/2016 9:48 AM, Greg Kurz wrote:
> > On Thu, 22 Sep 2016 07:59:19 -0400
> > Pradeep Jagadeesh <address@hidden> wrote:
> >
> >> Uses throttling APIs to limit I/O bandwidth and number of operations on the
> >> devices which use 9p-local driver.
> >>
> >> Signed-off-by: Pradeep Jagadeesh <address@hidden>
> >> ---
> >
> > Hi Pradeep,
> >
> > So where are we with this patch ? Have you solved the issues you mentioned
> > in
> > <address@hidden> ?
> >
> > I don't have much time so I'll wait for v5 to comment.
> >
> > And maybe you can push the option list to a THROTTLE_COMMON_OPTS macro
> > in a include/qemu/throttle-options.h header file, to be included by
> > both blockdev.c and fsdev/qemu-fsdev-throttle.c.
> >
> As I understand correctly, this is about removing the duplication right?
Correct.
> I did not take care of this comment. I would like to push it as part of
> may be next patch. Is that OK with you?
>
Yes.
> Regards,
> Pradeep
>
> > Cheers.
> >
> > --
> > Greg
> >
> >> fsdev/Makefile.objs | 1 +
> >> fsdev/file-op-9p.h | 3 +
> >> fsdev/qemu-fsdev-opts.c | 76 +++++++++++++++++++++++
> >> fsdev/qemu-fsdev-throttle.c | 146
> >> ++++++++++++++++++++++++++++++++++++++++++++
> >> fsdev/qemu-fsdev-throttle.h | 36 +++++++++++
> >> hw/9pfs/9p-local.c | 9 ++-
> >> hw/9pfs/9p.c | 6 ++
> >> hw/9pfs/cofile.c | 3 +
> >> 8 files changed, 278 insertions(+), 2 deletions(-)
> >> create mode 100644 fsdev/qemu-fsdev-throttle.c
> >> create mode 100644 fsdev/qemu-fsdev-throttle.h
> >>
> >> This adds the support for the 9p-local driver.
> >> For now this functionality can be enabled only through qemu cli options.
> >> QMP interface and support to other drivers need further extensions.
> >> To make it simple for other drivers, the throttle code has been put in
> >> separate files.
> >>
> >> v1 -> v2:
> >>
> >> -Fixed FsContext redeclaration issue
> >> -Removed couple of function declarations from 9p-throttle.h
> >> -Fixed some of the .help messages
> >>
> >> v2 -> v3:
> >>
> >> -Addressed follwing comments by Claudio Fontana
> >> -Removed redundant memset calls in fsdev_throttle_configure_iolimits
> >> function
> >> -Checking throttle structure validity before initializing other structures
> >> in fsdev_throttle_configure_iolimits
> >>
> >> -Addressed following comments by Greg Kurz
> >> -Moved the code from 9pfs directory to fsdev directory, because the
> >> throttling
> >> is for the fsdev devices.Renamed the files and functions to fsdev_ from
> >> 9pfs_
> >> -Renamed throttling cli options to throttling.*, as in QMP cli options
> >> -Removed some of the unwanted .h files from qemu-fsdev-throttle.[ch]
> >> -Using throttle_enabled() function to set the thottle enabled flag for
> >> fsdev.
> >>
> >> v3 -> v4:
> >>
> >> -Addressed following comments by Alberto Garcia
> >> -Removed the unwanted locking and other data structures in
> >> qemu-fsdev-throttle.[ch]
> >>
> >> -Addressed following comments by Greg Kurz
> >> -Removed fsdev_iolimitsenable/disable functions, instead using
> >> throttle_enabled function
> >>
> >>
> >>
> >> diff --git a/fsdev/Makefile.objs b/fsdev/Makefile.objs
> >> index 1b120a4..2c6da2d 100644
> >> --- a/fsdev/Makefile.objs
> >> +++ b/fsdev/Makefile.objs
> >> @@ -7,6 +7,7 @@ common-obj-y = qemu-fsdev-dummy.o
> >> endif
> >> common-obj-y += qemu-fsdev-opts.o
> >>
> >> +common-obj-y += qemu-fsdev-throttle.o
> >> # Toplevel always builds this; targets without virtio will put it in
> >> # common-obj-y
> >> common-obj-$(CONFIG_ALL) += qemu-fsdev-dummy.o
> >> diff --git a/fsdev/file-op-9p.h b/fsdev/file-op-9p.h
> >> index 6db9fea..33fe822 100644
> >> --- a/fsdev/file-op-9p.h
> >> +++ b/fsdev/file-op-9p.h
> >> @@ -17,6 +17,7 @@
> >> #include <dirent.h>
> >> #include <utime.h>
> >> #include <sys/vfs.h>
> >> +#include "qemu-fsdev-throttle.h"
> >>
> >> #define SM_LOCAL_MODE_BITS 0600
> >> #define SM_LOCAL_DIR_MODE_BITS 0700
> >> @@ -74,6 +75,7 @@ typedef struct FsDriverEntry {
> >> char *path;
> >> int export_flags;
> >> FileOperations *ops;
> >> + FsThrottle fst;
> >> } FsDriverEntry;
> >>
> >> typedef struct FsContext
> >> @@ -83,6 +85,7 @@ typedef struct FsContext
> >> int export_flags;
> >> struct xattr_operations **xops;
> >> struct extended_ops exops;
> >> + FsThrottle *fst;
> >> /* fs driver specific data */
> >> void *private;
> >> } FsContext;
> >> diff --git a/fsdev/qemu-fsdev-opts.c b/fsdev/qemu-fsdev-opts.c
> >> index 1dd8c7a..395d497 100644
> >> --- a/fsdev/qemu-fsdev-opts.c
> >> +++ b/fsdev/qemu-fsdev-opts.c
> >> @@ -37,6 +37,82 @@ static QemuOptsList qemu_fsdev_opts = {
> >> }, {
> >> .name = "sock_fd",
> >> .type = QEMU_OPT_NUMBER,
> >> + }, {
> >> + .name = "throttling.iops-total",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "limit total I/O operations per second",
> >> + },{
> >> + .name = "throttling.iops-read",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "limit read operations per second",
> >> + },{
> >> + .name = "throttling.iops-write",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "limit write operations per second",
> >> + },{
> >> + .name = "throttling.bps-total",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "limit total bytes per second",
> >> + },{
> >> + .name = "throttling.bps-read",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "limit read bytes per second",
> >> + },{
> >> + .name = "throttling.bps-write",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "limit write bytes per second",
> >> + },{
> >> + .name = "throttling.iops-total-max",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "I/O operations burst",
> >> + },{
> >> + .name = "throttling.iops-read-max",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "I/O operations read burst",
> >> + },{
> >> + .name = "throttling.iops-write-max",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "I/O operations write burst",
> >> + },{
> >> + .name = "throttling.bps-total-max",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "total bytes burst",
> >> + },{
> >> + .name = "throttling.bps-read-max",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "total bytes read burst",
> >> + },{
> >> + .name = "throttling.bps-write-max",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "total bytes write burst",
> >> + },{
> >> + .name = "throttling.iops-total-max-length",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "length of the iops-total-max burst period, in
> >> seconds",
> >> + },{
> >> + .name = "throttling.iops-read-max-length",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "length of the iops-read-max burst period, in
> >> seconds",
> >> + },{
> >> + .name = "throttling.iops-write-max-length",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "length of the iops-write-max burst period, in
> >> seconds",
> >> + },{
> >> + .name = "throttling.bps-total-max-length",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "length of the bps-total-max burst period, in
> >> seconds",
> >> + },{
> >> + .name = "throttling.bps-read-max-length",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "length of the bps-read-max burst period, in seconds",
> >> + },{
> >> + .name = "throttling.bps-write-max-length",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "length of the bps-write-max burst period, in
> >> seconds",
> >> + },{
> >> + .name = "throttling.iops-size",
> >> + .type = QEMU_OPT_NUMBER,
> >> + .help = "when limiting by iops max size of an I/O in bytes",
> >> },
> >>
> >> { /*End of list */ }
> >> diff --git a/fsdev/qemu-fsdev-throttle.c b/fsdev/qemu-fsdev-throttle.c
> >> new file mode 100644
> >> index 0000000..704c687
> >> --- /dev/null
> >> +++ b/fsdev/qemu-fsdev-throttle.c
> >> @@ -0,0 +1,146 @@
> >> +/*
> >> + * Fsdev Throttle
> >> + *
> >> + * Copyright (C) 2016 Huawei Technologies Duesseldorf GmbH
> >> + *
> >> + * Author: Pradeep Jagadeesh <address@hidden>
> >> + *
> >> + * This work is licensed under the terms of the GNU GPL, version 2 or
> >> + * (at your option) any later version.
> >> + *
> >> + * See the COPYING file in the top-level directory for details.
> >> + *
> >> + */
> >> +
> >> +#include "qemu/osdep.h"
> >> +#include "qemu/error-report.h"
> >> +#include "qapi/error.h"
> >> +#include "qemu-fsdev-throttle.h"
> >> +
> >> +static bool fsdev_throttle_check_for_wait(FsThrottle *fst, bool is_write)
> >> +{
> >> + return throttle_schedule_timer(&fst->ts, &fst->tt, is_write);
> >> +}
> >> +
> >> +static void fsdev_throttle_schedule_next_request(FsThrottle *fst, bool
> >> is_write)
> >> +{
> >> + bool must_wait = fsdev_throttle_check_for_wait(fst, is_write);
> >> + if (!must_wait) {
> >> + if (qemu_in_coroutine() &&
> >> + qemu_co_queue_next(&fst->throttled_reqs[is_write])) {
> >> + ;
> >> + } else {
> >> + int64_t now = qemu_clock_get_ns(fst->tt.clock_type);
> >> + timer_mod(fst->tt.timers[is_write], now + 1);
> >> + }
> >> + }
> >> +}
> >> +
> >> +static void fsdev_throttle_timer_cb(FsThrottle *fst, bool is_write)
> >> +{
> >> + bool empty_queue;
> >> +
> >> + empty_queue = !qemu_co_enter_next(&fst->throttled_reqs[is_write]);
> >> + if (empty_queue) {
> >> + fsdev_throttle_schedule_next_request(fst, is_write);
> >> + }
> >> +}
> >> +
> >> +static void fsdev_throttle_read_timer_cb(void *opaque)
> >> +{
> >> + fsdev_throttle_timer_cb(opaque, false);
> >> +}
> >> +
> >> +static void fsdev_throttle_write_timer_cb(void *opaque)
> >> +{
> >> + fsdev_throttle_timer_cb(opaque, true);
> >> +}
> >> +
> >> +static void fsdev_parse_io_limit_opts(QemuOpts *opts, FsThrottle *fst)
> >> +{
> >> + fst->cfg.buckets[THROTTLE_BPS_TOTAL].avg =
> >> + qemu_opt_get_number(opts, "throttling.bps-total", 0);
> >> + fst->cfg.buckets[THROTTLE_BPS_READ].avg =
> >> + qemu_opt_get_number(opts, "throttling.bps-read", 0);
> >> + fst->cfg.buckets[THROTTLE_BPS_WRITE].avg =
> >> + qemu_opt_get_number(opts, "throttling.bps-write", 0);
> >> + fst->cfg.buckets[THROTTLE_OPS_TOTAL].avg =
> >> + qemu_opt_get_number(opts, "throttling.iops-total", 0);
> >> + fst->cfg.buckets[THROTTLE_OPS_READ].avg =
> >> + qemu_opt_get_number(opts, "throttling.iops-read", 0);
> >> + fst->cfg.buckets[THROTTLE_OPS_WRITE].avg =
> >> + qemu_opt_get_number(opts, "throttling.iops-write", 0);
> >> +
> >> + fst->cfg.buckets[THROTTLE_BPS_TOTAL].max =
> >> + qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> >> + fst->cfg.buckets[THROTTLE_BPS_READ].max =
> >> + qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> >> + fst->cfg.buckets[THROTTLE_BPS_WRITE].max =
> >> + qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> >> + fst->cfg.buckets[THROTTLE_OPS_TOTAL].max =
> >> + qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> >> + fst->cfg.buckets[THROTTLE_OPS_READ].max =
> >> + qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> >> + fst->cfg.buckets[THROTTLE_OPS_WRITE].max =
> >> + qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> >> +
> >> + fst->cfg.buckets[THROTTLE_BPS_TOTAL].burst_length =
> >> + qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
> >> + fst->cfg.buckets[THROTTLE_BPS_READ].burst_length =
> >> + qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> >> + fst->cfg.buckets[THROTTLE_BPS_WRITE].burst_length =
> >> + qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
> >> + fst->cfg.buckets[THROTTLE_OPS_TOTAL].burst_length =
> >> + qemu_opt_get_number(opts, "throttling.iops-total-max-length",
> >> 1);
> >> + fst->cfg.buckets[THROTTLE_OPS_READ].burst_length =
> >> + qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
> >> + fst->cfg.buckets[THROTTLE_OPS_WRITE].burst_length =
> >> + qemu_opt_get_number(opts, "throttling.iops-write-max-length",
> >> 1);
> >> + fst->cfg.op_size =
> >> + qemu_opt_get_number(opts, "throttling.iops-size", 0);
> >> +}
> >> +
> >> +int fsdev_throttle_configure_iolimits(QemuOpts *opts, FsThrottle *fst)
> >> +{
> >> + Error *err = NULL;
> >> +
> >> + /* Parse and set populate the cfg structure */
> >> + fsdev_parse_io_limit_opts(opts, fst);
> >> +
> >> + if (!throttle_is_valid(&fst->cfg, &err)) {
> >> + error_reportf_err(err, "Throttle configuration is not valid: ");
> >> + return -1;
> >> + }
> >> + if (throttle_enabled(&fst->cfg)) {
> >> + g_assert((fst->aioctx = qemu_get_aio_context()));
> >> + throttle_init(&fst->ts);
> >> + throttle_timers_init(&fst->tt,
> >> + fst->aioctx,
> >> + QEMU_CLOCK_REALTIME,
> >> + fsdev_throttle_read_timer_cb,
> >> + fsdev_throttle_write_timer_cb,
> >> + fst);
> >> + throttle_config(&fst->ts, &fst->tt, &fst->cfg);
> >> + qemu_co_queue_init(&fst->throttled_reqs[0]);
> >> + qemu_co_queue_init(&fst->throttled_reqs[1]);
> >> + }
> >> + return 0;
> >> +}
> >> +
> >> +void fsdev_throttle_request(FsThrottle *fst, bool is_write, ssize_t bytes)
> >> +{
> >> + bool must_wait;
> >> +
> >> + if (throttle_enabled(&fst->cfg)) {
> >> + must_wait = fsdev_throttle_check_for_wait(fst, is_write);
> >> + if (must_wait) {
> >> + qemu_co_queue_wait(&fst->throttled_reqs[is_write]);
> >> + }
> >> + throttle_account(&fst->ts, is_write, bytes);
> >> + fsdev_throttle_schedule_next_request(fst, is_write);
> >> + }
> >> +}
> >> +void fsdev_throttle_cleanup(FsThrottle *fst)
> >> +{
> >> + throttle_timers_destroy(&fst->tt);
> >> +}
> >> diff --git a/fsdev/qemu-fsdev-throttle.h b/fsdev/qemu-fsdev-throttle.h
> >> new file mode 100644
> >> index 0000000..5ae452c
> >> --- /dev/null
> >> +++ b/fsdev/qemu-fsdev-throttle.h
> >> @@ -0,0 +1,36 @@
> >> +/*
> >> + * Fsdev Throttle
> >> + *
> >> + * Copyright (C) 2016 Huawei Technologies Duesseldorf GmbH
> >> + *
> >> + * Author: Pradeep Jagadeesh <address@hidden>
> >> + *
> >> + * This work is licensed under the terms of the GNU GPL, version 2 or
> >> + * (at your option) any later version.
> >> + *
> >> + * See the COPYING file in the top-level directory for details.
> >> + *
> >> + */
> >> +
> >> +#ifndef _FSDEV_THROTTLE_H
> >> +#define _FSDEV_THROTTLE_H
> >> +
> >> +#include "block/aio.h"
> >> +#include "qemu/main-loop.h"
> >> +#include "qemu/coroutine.h"
> >> +#include "qemu/throttle.h"
> >> +
> >> +typedef struct FsThrottle {
> >> + ThrottleState ts;
> >> + ThrottleTimers tt;
> >> + AioContext *aioctx;
> >> + ThrottleConfig cfg;
> >> + CoQueue throttled_reqs[2];
> >> +} FsThrottle;
> >> +
> >> +int fsdev_throttle_configure_iolimits(QemuOpts *, FsThrottle *);
> >> +
> >> +void fsdev_throttle_request(FsThrottle *, bool , ssize_t);
> >> +
> >> +void fsdev_throttle_cleanup(FsThrottle *);
> >> +#endif /* _FSDEV_THROTTLE_H */
> >> diff --git a/hw/9pfs/9p-local.c b/hw/9pfs/9p-local.c
> >> index 3f271fc..54459f2 100644
> >> --- a/hw/9pfs/9p-local.c
> >> +++ b/hw/9pfs/9p-local.c
> >> @@ -436,8 +436,8 @@ static ssize_t local_pwritev(FsContext *ctx,
> >> V9fsFidOpenState *fs,
> >> const struct iovec *iov,
> >> int iovcnt, off_t offset)
> >> {
> >> - ssize_t ret
> >> -;
> >> + ssize_t ret;
> >> +
> >> #ifdef CONFIG_PREADV
> >> ret = pwritev(fs->fd, iov, iovcnt, offset);
> >> #else
> >> @@ -1240,6 +1240,11 @@ static int local_parse_opts(QemuOpts *opts, struct
> >> FsDriverEntry *fse)
> >> error_report("fsdev: No path specified");
> >> return -1;
> >> }
> >> +
> >> + if (fsdev_throttle_configure_iolimits(opts, &fse->fst) < 0) {
> >> + return -1;
> >> + }
> >> +
> >> fse->path = g_strdup(path);
> >>
> >> return 0;
> >> diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c
> >> index dfe293d..ccf6d0c 100644
> >> --- a/hw/9pfs/9p.c
> >> +++ b/hw/9pfs/9p.c
> >> @@ -3490,6 +3490,9 @@ int v9fs_device_realize_common(V9fsState *s, Error
> >> **errp)
> >> error_setg(errp, "share path %s is not a directory", fse->path);
> >> goto out;
> >> }
> >> +
> >> + s->ctx.fst = &fse->fst;
> >> +
> >> v9fs_path_free(&path);
> >>
> >> rc = 0;
> >> @@ -3504,6 +3507,9 @@ out:
> >>
> >> void v9fs_device_unrealize_common(V9fsState *s, Error **errp)
> >> {
> >> + if (throttle_enabled(&s->ctx.fst->cfg)) {
> >> + fsdev_throttle_cleanup(s->ctx.fst);
> >> + }
> >> g_free(s->ctx.fs_root);
> >> g_free(s->tag);
> >> }
> >> diff --git a/hw/9pfs/cofile.c b/hw/9pfs/cofile.c
> >> index 10343c0..5b0ebe0 100644
> >> --- a/hw/9pfs/cofile.c
> >> +++ b/hw/9pfs/cofile.c
> >> @@ -16,6 +16,7 @@
> >> #include "qemu/thread.h"
> >> #include "qemu/coroutine.h"
> >> #include "coth.h"
> >> +#include "fsdev/qemu-fsdev-throttle.h"
> >>
> >> int v9fs_co_st_gen(V9fsPDU *pdu, V9fsPath *path, mode_t st_mode,
> >> V9fsStatDotl *v9stat)
> >> @@ -245,6 +246,7 @@ int v9fs_co_pwritev(V9fsPDU *pdu, V9fsFidState *fidp,
> >> if (v9fs_request_cancelled(pdu)) {
> >> return -EINTR;
> >> }
> >> + fsdev_throttle_request(s->ctx.fst, true, iov->iov_len);
> >> v9fs_co_run_in_worker(
> >> {
> >> err = s->ops->pwritev(&s->ctx, &fidp->fs, iov, iovcnt,
> >> offset);
> >> @@ -264,6 +266,7 @@ int v9fs_co_preadv(V9fsPDU *pdu, V9fsFidState *fidp,
> >> if (v9fs_request_cancelled(pdu)) {
> >> return -EINTR;
> >> }
> >> + fsdev_throttle_request(s->ctx.fst, false, iov->iov_len);
> >> v9fs_co_run_in_worker(
> >> {
> >> err = s->ops->preadv(&s->ctx, &fidp->fs, iov, iovcnt,
> >> offset);
> >
>