qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v13 14/19] qemu-iotests: Test overlapping stream and


From: Alberto Garcia
Subject: [Qemu-devel] [PATCH v13 14/19] qemu-iotests: Test overlapping stream and commit operations
Date: Fri, 28 Oct 2016 10:08:15 +0300

These test cases check that it's not possible to perform two
block-stream or block-commit operations if there are nodes involved in
both.

Signed-off-by: Alberto Garcia <address@hidden>
Reviewed-by: Kevin Wolf <address@hidden>
---
 tests/qemu-iotests/030     | 89 ++++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/030.out |  4 +--
 2 files changed, 91 insertions(+), 2 deletions(-)

diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index ba9a541..3533495 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -228,6 +228,95 @@ class TestParallelOps(iotests.QMPTestCase):
                              qemu_io('-f', iotests.imgfmt, '-c', 'map', 
self.imgs[i-1]),
                              'image file map does not match backing file after 
streaming')
 
+    # Test that it's not possible to perform two block-stream
+    # operations if there are nodes involved in both.
+    def test_overlapping_1(self):
+        self.assert_no_active_block_jobs()
+
+        # Set a speed limit to make sure that this job blocks the rest
+        result = self.vm.qmp('block-stream', device='node4', 
job_id='stream-node4', base=self.imgs[1], speed=1024*1024)
+        self.assert_qmp(result, 'return', {})
+
+        result = self.vm.qmp('block-stream', device='node5', 
job_id='stream-node5', base=self.imgs[2])
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        result = self.vm.qmp('block-stream', device='node3', 
job_id='stream-node3', base=self.imgs[2])
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        result = self.vm.qmp('block-stream', device='node4', 
job_id='stream-node4-v2')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        # block-commit should also fail if it touches nodes used by the stream 
job
+        result = self.vm.qmp('block-commit', device='drive0', 
base=self.imgs[4], job_id='commit-node4')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        result = self.vm.qmp('block-commit', device='drive0', 
base=self.imgs[1], top=self.imgs[3], job_id='commit-node1')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        # This fails because it needs to modify the backing string in node2, 
which is blocked
+        result = self.vm.qmp('block-commit', device='drive0', 
base=self.imgs[0], top=self.imgs[1], job_id='commit-node0')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        self.wait_until_completed(drive='stream-node4')
+        self.assert_no_active_block_jobs()
+
+    # Similar to test_overlapping_1, but with block-commit
+    # blocking the other jobs
+    def test_overlapping_2(self):
+        self.assertLessEqual(9, self.num_imgs)
+        self.assert_no_active_block_jobs()
+
+        # Set a speed limit to make sure that this job blocks the rest
+        result = self.vm.qmp('block-commit', device='drive0', 
top=self.imgs[5], base=self.imgs[3], job_id='commit-node3', speed=1024*1024)
+        self.assert_qmp(result, 'return', {})
+
+        result = self.vm.qmp('block-stream', device='node3', 
job_id='stream-node3')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        result = self.vm.qmp('block-stream', device='node6', 
base=self.imgs[2], job_id='stream-node6')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        result = self.vm.qmp('block-stream', device='node4', 
base=self.imgs[2], job_id='stream-node4')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        result = self.vm.qmp('block-stream', device='node6', 
base=self.imgs[4], job_id='stream-node6-v2')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        # This fails because block-commit needs to block node6, the overlay of 
the 'top' image
+        result = self.vm.qmp('block-stream', device='node7', 
base=self.imgs[5], job_id='stream-node6-v3')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        # This fails because block-commit currently blocks the active layer 
even if it's not used
+        result = self.vm.qmp('block-stream', device='drive0', 
base=self.imgs[5], job_id='stream-drive0')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        self.wait_until_completed(drive='commit-node3')
+
+    # Similar to test_overlapping_2, but here block-commit doesn't use the 
'top' parameter.
+    # Internally this uses a mirror block job, hence the separate test case.
+    def test_overlapping_3(self):
+        self.assertLessEqual(8, self.num_imgs)
+        self.assert_no_active_block_jobs()
+
+        # Set a speed limit to make sure that this job blocks the rest
+        result = self.vm.qmp('block-commit', device='drive0', 
base=self.imgs[3], job_id='commit-drive0', speed=1024*1024)
+        self.assert_qmp(result, 'return', {})
+
+        result = self.vm.qmp('block-stream', device='node5', 
base=self.imgs[3], job_id='stream-node6')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        event = self.vm.get_qmp_event(wait=True)
+        self.assertEqual(event['event'], 'BLOCK_JOB_READY')
+        self.assert_qmp(event, 'data/device', 'commit-drive0')
+        self.assert_qmp(event, 'data/type', 'commit')
+        self.assert_qmp_absent(event, 'data/error')
+
+        result = self.vm.qmp('block-job-complete', device='commit-drive0')
+        self.assert_qmp(result, 'return', {})
+
+        self.wait_until_completed(drive='commit-drive0')
+        self.assert_no_active_block_jobs()
+
 class TestSmallerBackingFile(iotests.QMPTestCase):
     backing_len = 1 * 1024 * 1024 # MB
     image_len = 2 * backing_len
diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out
index b6f2576..4176bb9 100644
--- a/tests/qemu-iotests/030.out
+++ b/tests/qemu-iotests/030.out
@@ -1,5 +1,5 @@
-................
+...................
 ----------------------------------------------------------------------
-Ran 16 tests
+Ran 19 tests
 
 OK
-- 
2.9.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]