qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 4/4] hw/i2c/bitbang_i2c: Handle NACKs from devices


From: Peter Maydell
Subject: [Qemu-devel] [PULL 4/4] hw/i2c/bitbang_i2c: Handle NACKs from devices
Date: Mon, 7 Nov 2016 10:47:33 +0000

If the guest attempts to talk to a nonexistent device over i2c,
the i2c_start_transfer() function will return non-zero, indicating
that the bus is signalling a NACK. Similarly, if the i2c_send()
function returns nonzero then the target device returned a NACK.
Handle this possibility in the bitbang_i2c code, by returning
the state machine to the STOPPED state and returning the NACK
bit to the guest.

This bit of missing functionality was spotted by Coverity
(it noticed that we weren't checking the return value from
i2c_start_transfer()).

Signed-off-by: Peter Maydell <address@hidden>
Message-id: address@hidden
---
 hw/i2c/bitbang_i2c.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/hw/i2c/bitbang_i2c.c b/hw/i2c/bitbang_i2c.c
index d3a2989..8be88ee 100644
--- a/hw/i2c/bitbang_i2c.c
+++ b/hw/i2c/bitbang_i2c.c
@@ -130,14 +130,25 @@ int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, 
int level)
         return bitbang_i2c_ret(i2c, 1);
 
     case WAITING_FOR_ACK:
+    {
+        int ret;
+
         if (i2c->current_addr < 0) {
             i2c->current_addr = i2c->buffer;
             DPRINTF("Address 0x%02x\n", i2c->current_addr);
-            i2c_start_transfer(i2c->bus, i2c->current_addr >> 1,
-                               i2c->current_addr & 1);
+            ret = i2c_start_transfer(i2c->bus, i2c->current_addr >> 1,
+                                     i2c->current_addr & 1);
         } else {
             DPRINTF("Sent 0x%02x\n", i2c->buffer);
-            i2c_send(i2c->bus, i2c->buffer);
+            ret = i2c_send(i2c->bus, i2c->buffer);
+        }
+        if (ret) {
+            /* NACK (either addressing a nonexistent device, or the
+             * device we were sending to decided to NACK us).
+             */
+            DPRINTF("Got NACK\n");
+            bitbang_i2c_enter_stop(i2c);
+            return bitbang_i2c_ret(i2c, 1);
         }
         if (i2c->current_addr & 1) {
             i2c->state = RECEIVING_BIT7;
@@ -145,7 +156,7 @@ int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, 
int level)
             i2c->state = SENDING_BIT7;
         }
         return bitbang_i2c_ret(i2c, 0);
-
+    }
     case RECEIVING_BIT7:
         i2c->buffer = i2c_recv(i2c->bus);
         DPRINTF("RX byte 0x%02x\n", i2c->buffer);
-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]