Re: [Qemu-devel] [PATCH] doc/pcie: correct command line examples

[Cao jin]

On 12/28/2016 11:21 PM, Andrew Jones wrote:
> On Wed, Dec 28, 2016 at 03:24:30PM +0200, Marcel Apfelbaum wrote:
>> On 12/27/2016 09:40 AM, Cao jin wrote:
>>> Nit picking: Multi-function PCI Express Root Ports should mean that
>>> 'addr' property is mandatory, and slot is optional because it is default
>>> to 0, and 'chassis' is mandatory for 2nd & 3rd root port because it is
>>> default to 0 too.
>>>
>>> Bonus: fix a typo(2->3)
>>> Signed-off-by: Cao jin <address@hidden>
>>> ---
>>>  docs/pcie.txt | 12 ++++++------
>>>  1 file changed, 6 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/docs/pcie.txt b/docs/pcie.txt
>>> index 9fb20aaed9f4..54f05eaa71dc 100644
>>> --- a/docs/pcie.txt
>>> +++ b/docs/pcie.txt
>>> @@ -110,18 +110,18 @@ Plug only PCI Express devices into PCI Express Ports.
>>>            -device 
>>> ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z]  \
>>>            -device <dev>,bus=root_port1
>>>  2.2.2 Using multi-function PCI Express Root Ports:
>>> -      -device 
>>> ioh3420,id=root_port1,multifunction=on,chassis=x,slot=y[,bus=pcie.0][,addr=z.0]
>>>  \
>>> -      -device 
>>> ioh3420,id=root_port2,chassis=x1,slot=y1[,bus=pcie.0][,addr=z.1] \
>>> -      -device 
>>> ioh3420,id=root_port3,chassis=x2,slot=y2[,bus=pcie.0][,addr=z.2] \
>>> -2.2.2 Plugging a PCI Express device into a Switch:
>>> +      -device 
>>> ioh3420,id=root_port1,multifunction=on,chassis=x,addr=z.0[,slot=y][,bus=pcie.0]
>>>  \
>>> +      -device 
>>> ioh3420,id=root_port2,chassis=x1,addr=z.1[,slot=y1][,bus=pcie.0] \
>>> +      -device 
>>> ioh3420,id=root_port3,chassis=x2,addr=z.2[,slot=y2][,bus=pcie.0] \
>>> +2.2.3 Plugging a PCI Express device into a Switch:
>>>        -device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] 
>>>  \
>>>        -device x3130-upstream,id=upstream_port1,bus=root_port1[,addr=x]     
>>>      \
>>>        -device 
>>> xio3130-downstream,id=downstream_port1,bus=upstream_port1,chassis=x1,slot=y1[,addr=z1]]
>>>  \
>>>        -device <dev>,bus=downstream_port1
>>>
>>>  Notes:
>>> -  - (slot, chassis) pair is mandatory and must be
>>> -     unique for each PCI Express Root Port.
>>> +  - (slot, chassis) pair is mandatory and must be unique for each
>>> +    PCI Express Root Port. slot is default to 0 when doesn't specify it.
> 
> Please rewrite last sentence as
> 
>  slot defaults to 0 when not specified.

Thanks for pointing it out, v2 is on the way.

-- 
Sincerely,
Cao jin

> 
>>>    - 'addr' parameter can be 0 for all the examples above.
>>>
>>>
>>>
>>
>> Reviewed-by: Marcel Apfelbaum <address@hidden>
>>
>> Thanks,
>> Marcel
>>
> 
> Thanks,
> drew
> 
> 
> .
>