qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [RFC PATCH 05/17] target/ppc/POWER9: Adapt LPCR handlin


From: David Gibson
Subject: Re: [Qemu-devel] [RFC PATCH 05/17] target/ppc/POWER9: Adapt LPCR handling for POWER9
Date: Tue, 17 Jan 2017 15:37:34 +1100
User-agent: Mutt/1.7.1 (2016-10-04)

On Tue, Jan 17, 2017 at 11:48:31AM +1100, Suraj Jitindar Singh wrote:
> On Tue, 2017-01-17 at 08:40 +1100, David Gibson wrote:
> > On Fri, Jan 13, 2017 at 05:28:11PM +1100, Suraj Jitindar Singh wrote:
> > > 
> > > The logical partitioning control register controls a threads
> > > operation
> > > based on the partition it is currently executing. Add new
> > > definitions and
> > > update the mask used when writing to the LPCR based on the POWER9
> > > spec.
> > > 
> > > Signed-off-by: Suraj Jitindar Singh <address@hidden>
> > > ---
> > >  target/ppc/cpu.h            | 20 +++++++++++++++++++-
> > >  target/ppc/mmu-hash64.c     |  8 ++++++++
> > >  target/ppc/translate_init.c | 24 ++++++++++++++++++------
> > >  3 files changed, 45 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> > > index afb7ddb..0ab49b3 100644
> > > --- a/target/ppc/cpu.h
> > > +++ b/target/ppc/cpu.h
> > > @@ -379,15 +379,22 @@ struct ppc_slb_t {
> > >  #define LPCR_ISL          (1ull << (63 - 2))
> > >  #define LPCR_KBV          (1ull << (63 - 3))
> > >  #define LPCR_DPFD_SHIFT   (63 - 11)
> > > -#define LPCR_DPFD         (0x3ull << LPCR_DPFD_SHIFT)
> > > +#define LPCR_DPFD         (0x7ull << LPCR_DPFD_SHIFT)
> > Changing this define effectively changes the valid LPCR mask for
> > existing POWER8 and POWER7 models, which is not what you want, I
> > think.
> I should have explained this better in the commit message, this has
> always been a 3 bit field (at least in POWER7-9) so the mask has just
> always been wrong. Afaik fixing this up won't really change anything -
> it relates to data stream prefetch depth.
> 
> I realise this should probably be a separate patch though, or atleast
> mentioned in the commit message.

Right, yes.  Please make the bugfix a separate patch with the
explanation in the commit message.

> > 
> > > 
> > >  #define LPCR_VRMASD_SHIFT (63 - 16)
> > >  #define LPCR_VRMASD       (0x1full << LPCR_VRMASD_SHIFT)
> > > +/* P9: Power-saving mode Exit Cause Enable (Upper Section) Mask */
> > > +#define LPCR_PECE_U_SHIFT (63 - 19)
> > > +#define LPCR_PECE_U_MASK  (0x7ull << LPCR_PECE_U_SHIFT)
> > > +#define LPCR_HVEE         (1ull << (63 - 17)) /* Hypervisor Virt
> > > Exit Enable */
> > >  #define LPCR_RMLS_SHIFT   (63 - 37)
> > >  #define LPCR_RMLS         (0xfull << LPCR_RMLS_SHIFT)
> > >  #define LPCR_ILE          (1ull << (63 - 38))
> > >  #define LPCR_AIL_SHIFT    (63 - 40)      /* Alternate interrupt
> > > location */
> > >  #define LPCR_AIL          (3ull << LPCR_AIL_SHIFT)
> > > +#define LPCR_UPRT         (1ull << (63 - 41)) /* Use Process Table
> > > */
> > > +#define LPCR_EVIRT        (1ull << (63 - 42)) /* Enhanced
> > > Virtualisation */
> > >  #define LPCR_ONL          (1ull << (63 - 45))
> > > +#define LPCR_LD           (1ull << (63 - 46)) /* Large Decrementer
> > > */
> > >  #define LPCR_P7_PECE0     (1ull << (63 - 49))
> > >  #define LPCR_P7_PECE1     (1ull << (63 - 50))
> > >  #define LPCR_P7_PECE2     (1ull << (63 - 51))
> > > @@ -396,11 +403,22 @@ struct ppc_slb_t {
> > >  #define LPCR_P8_PECE2     (1ull << (63 - 49))
> > >  #define LPCR_P8_PECE3     (1ull << (63 - 50))
> > >  #define LPCR_P8_PECE4     (1ull << (63 - 51))
> > > +/* P9: Power-saving mode Exit Cause Enable (Lower Section) Mask */
> > > +#define LPCR_PECE_L_SHIFT (63 - 51)
> > > +#define LPCR_PECE_L_MASK  (0x1full << LPCR_PECE_L_SHIFT)
> > > +#define LPCR_PDEE         (1ull << (63 - 47)) /* Privileged
> > > Doorbell Exit EN */
> > > +#define LPCR_HDEE         (1ull << (63 - 48)) /* Hyperv Doorbell
> > > Exit Enable */
> > > +#define LPCR_EEE          (1ull << (63 - 49)) /* External Exit
> > > Enable        */
> > > +#define LPCR_DEE          (1ull << (63 - 50)) /* Decrementer Exit
> > > Enable     */
> > > +#define LPCR_OEE          (1ull << (63 - 51)) /* Other Exit
> > > Enable           */
> > >  #define LPCR_MER          (1ull << (63 - 52))
> > > +#define LPCR_GTSE         (1ull << (63 - 53)) /* Guest Translation
> > > Shootdown */
> > >  #define LPCR_TC           (1ull << (63 - 54))
> > > +#define LPCR_HEIC         (1ull << (63 - 59)) /* HV Extern
> > > Interrupt Control */
> > >  #define LPCR_LPES0        (1ull << (63 - 60))
> > >  #define LPCR_LPES1        (1ull << (63 - 61))
> > >  #define LPCR_RMI          (1ull << (63 - 62))
> > > +#define LPCR_HVICE        (1ull << (63 - 62)) /* HV Virtualisation
> > > Int Enable */
> > >  #define LPCR_HDICE        (1ull << (63 - 63))
> > >  
> > >  #define msr_sf   ((env->msr >> MSR_SF)   & 1)
> > > diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
> > > index fdb7a78..3a2acb8 100644
> > > --- a/target/ppc/mmu-hash64.c
> > > +++ b/target/ppc/mmu-hash64.c
> > > @@ -1050,6 +1050,14 @@ void helper_store_lpcr(CPUPPCState *env,
> > > target_ulong val)
> > >                        LPCR_P8_PECE2 | LPCR_P8_PECE3 |
> > > LPCR_P8_PECE4 |
> > >                        LPCR_MER | LPCR_TC | LPCR_LPES0 |
> > > LPCR_HDICE);
> > >          break;
> > > +    case POWERPC_MMU_3_00: /* P9 */
> > > +        lpcr = val & (LPCR_VPM1 | LPCR_ISL | LPCR_KBV | LPCR_DPFD
> > > |
> > > +                      (LPCR_PECE_U_MASK & LPCR_HVEE) | LPCR_ILE |
> > > LPCR_AIL |
> > > +                      LPCR_UPRT | LPCR_EVIRT | LPCR_ONL |
> > > +                      (LPCR_PECE_L_MASK & (LPCR_PDEE | LPCR_HDEE |
> > > LPCR_EEE |
> > > +                      LPCR_DEE | LPCR_OEE)) | LPCR_MER | LPCR_GTSE
> > > | LPCR_TC |
> > > +                      LPCR_HEIC | LPCR_LPES0 | LPCR_HVICE |
> > > LPCR_HDICE);
> > > +        break;
> > >      default:
> > >          ;
> > >      }
> > > diff --git a/target/ppc/translate_init.c
> > > b/target/ppc/translate_init.c
> > > index 2402eef..a1994d3 100644
> > > --- a/target/ppc/translate_init.c
> > > +++ b/target/ppc/translate_init.c
> > > @@ -8887,12 +8887,24 @@ void cpu_ppc_set_papr(PowerPCCPU *cpu)
> > >      lpcr->default_value &= ~LPCR_RMLS;
> > >      lpcr->default_value |= 1ull << LPCR_RMLS_SHIFT;
> > >  
> > > -    /* P7 and P8 has slightly different PECE bits, mostly because
> > > P8 adds
> > > -     * bit 47 and 48 which are reserved on P7. Here we set them
> > > all, which
> > > -     * will work as expected for both implementations
> > > -     */
> > > -    lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 |
> > > LPCR_P8_PECE2 |
> > > -                           LPCR_P8_PECE3 | LPCR_P8_PECE4;
> > > +    switch (env->mmu_model) {
> > I'm not sure of mmu_model is conceptually the right thing to switch
> > on, although I guess it will work in practice.
> Well we need something to indicate our default value, which is dictated
> by the cpu model, and given that a cpu model correlates to a mmu model
> I can't think of a better option.

Yeah, I guess it's probably reasonable.  We can always change it later
if we need to.

> > 
> > > 
> > > +    case POWERPC_MMU_3_00:
> > > +        /* By default we choose legacy mode and switch to new hash
> > > or radix
> > > +         * when a register process table hcall is made. So disable
> > > process
> > > +         * tables and guest translation shootdown by default
> > > +         */
> > > +        lpcr->default_value &= ~(LPCR_UPRT | LPCR_GTSE);
> > > +        lpcr->default_value |= LPCR_PDEE | LPCR_HDEE | LPCR_EEE |
> > > LPCR_DEE |
> > > +                               LPCR_OEE;
> > > +        break;
> > > +    default:
> > > +        /* P7 and P8 has slightly different PECE bits, mostly
> > > because P8 adds
> > > +         * bit 47 and 48 which are reserved on P7. Here we set
> > > them all, which
> > > +         * will work as expected for both implementations
> > > +         */
> > > +        lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 |
> > > LPCR_P8_PECE2 |
> > > +                               LPCR_P8_PECE3 | LPCR_P8_PECE4;
> > > +    }
> > >  
> > >      /* We should be followed by a CPU reset but update the active
> > > value
> > >       * just in case...
> 

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

Attachment: signature.asc
Description: PGP signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]