[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1
From: |
Paolo Bonzini |
Subject: |
Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1 |
Date: |
Tue, 17 Jan 2017 16:03:19 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.5.1 |
On 17/01/2017 12:22, Fabian Grünbichler wrote:
> 6) repeat 3-5 until md5sum does not match, kernel spews error
> messages, or you are convinced that everything is OK
>
> sample kernel message (for ext3):
> Jan 17 11:39:32 ubuntu kernel: sd 2:0:0:0: [sda] tag#32 FAILED Result:
> hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Jan 17 11:39:32 ubuntu kernel: sd 2:0:0:0: [sda] tag#32 Sense Key : Illegal
> Request [current]
> Jan 17 11:39:32 ubuntu kernel: sd 2:0:0:0: [sda] tag#32 Add. Sense: Invalid
> field in cdb
> Jan 17 11:39:32 ubuntu kernel: sd 2:0:0:0: [sda] tag#32 CDB: Write(10) 2a 00
> 0f 3a 90 00 00 07 d8 00
> Jan 17 11:39:32 ubuntu kernel: blk_update_request: critical target error, dev
> sda, sector 255496192
Can you reproduce it if QEMU runs under "strace -e ioctl -ff" in the
host? Or also using this systemtap script.
The important bit would be the lines with a nonzero status, but the
others can be useful to see what the surroundings look like.
# example output for "sudo stap -v strace.stp -c 'sg_opcodes /dev/sda'"
# | sg_opcodes[3444] 00000000 12 00 00 00 24 00 00 00 be 91
# | sg_opcodes[3444] 08100002 a3 0c 00 00 00 00 00 00 20 00
global cdbs%
global reqs%
global names%
function check_pid() {
return target() == 0 || pid() == target();
}
probe kernel.function("blk_fill_sghdr_rq") {
if (!check_pid()) next;
names[$rq]=sprintf("%s[%d]", execname(), tid())
cdbs[$rq]=sprintf("%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
$hdr->cmdp[0],$hdr->cmdp[1],$hdr->cmdp[2],$hdr->cmdp[3],$hdr->cmdp[4],
$hdr->cmdp[6],$hdr->cmdp[5],$hdr->cmdp[7],$hdr->cmdp[8],$hdr->cmdp[9])
}
probe kernel.function("scsi_setup_cmnd") {
if (!($req in cdbs)) next;
reqs[$req->special] = $req;
}
probe kernel.function("scsi_finish_command") {
if (!($cmd in reqs)) next;
rq = reqs[$cmd];
printf("%s %08x %s\n", names[rq], $cmd->result, cdbs[rq]);
delete reqs[$cmd]
delete cdbs[rq]
}
- [Qemu-devel] Data corruption in Qemu 2.7.1, Peter Lieven, 2017/01/13
- Re: [Qemu-devel] Data corruption in Qemu 2.7.1, Fam Zheng, 2017/01/17
- Re: [Qemu-devel] Data corruption in Qemu 2.7.1, Alexandre DERUMIER, 2017/01/17
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Fabian Grünbichler, 2017/01/17
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Paolo Bonzini, 2017/01/17
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Fabian Grünbichler, 2017/01/17
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1,
Paolo Bonzini <=
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Paolo Bonzini, 2017/01/17
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Fabian Grünbichler, 2017/01/18
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Fabian Grünbichler, 2017/01/18
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Paolo Bonzini, 2017/01/18
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Fabian Grünbichler, 2017/01/18
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Fabian Grünbichler, 2017/01/19
- Re: [Qemu-devel] [Qemu-stable] Data corruption in Qemu 2.7.1, Paolo Bonzini, 2017/01/24