qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v9 04/11] msix: check msix_init's return value


From: Michael S. Tsirkin
Subject: Re: [Qemu-devel] [PATCH v9 04/11] msix: check msix_init's return value
Date: Tue, 17 Jan 2017 18:01:30 +0200

On Tue, Jan 17, 2017 at 02:50:38PM +0800, Cao jin wrote:
> forget to cc maintainers in this new patch
> 
> On 01/17/2017 02:18 PM, Cao jin wrote:
> > Doesn't do it for megasas & hcd-xhci, later patches will fix them.
> > 
> > Signed-off-by: Cao jin <address@hidden>

I don't like this one, frankly. That's a bunch of code duplication.
I suspect vfio is the only one who might reasonably get EINVAL here.
So how about e.g. msix_validate_and_init that doesn't assert and use that
from vfio, then switch msix_init to assert instead?

> > ---
> >  hw/net/e1000e.c        |  4 ++++
> >  hw/net/rocker/rocker.c |  5 +++++
> >  hw/net/vmxnet3.c       |  6 +++++-
> >  hw/virtio/virtio-pci.c | 13 +++++++------
> >  4 files changed, 21 insertions(+), 7 deletions(-)
> > 
> > diff --git a/hw/net/e1000e.c b/hw/net/e1000e.c
> > index ed04adce061c..74cbbef30366 100644
> > --- a/hw/net/e1000e.c
> > +++ b/hw/net/e1000e.c
> > @@ -294,6 +294,10 @@ e1000e_init_msix(E1000EState *s)
> >                          E1000E_MSIX_IDX, E1000E_MSIX_PBA,
> >                          0xA0, NULL);
> >  
> > +    /* Any error other than -ENOTSUP(board's MSI support is broken)
> > +     * is a programming error. Fall back to INTx silently on -ENOTSUP */

/* don't format
 * comments like this pls. */

/*
 * do it
 * like this pls
 */

> > +    assert(!res || res == -ENOTSUP);
> > +
> >      if (res < 0) {
> >          trace_e1000e_msix_init_fail(res);
> >      } else {
> > diff --git a/hw/net/rocker/rocker.c b/hw/net/rocker/rocker.c
> > index 6e70fddee36b..e394fd61fe64 100644
> > --- a/hw/net/rocker/rocker.c
> > +++ b/hw/net/rocker/rocker.c
> > @@ -1264,6 +1264,11 @@ static int rocker_msix_init(Rocker *r)
> >                      &r->msix_bar,
> >                      ROCKER_PCI_MSIX_BAR_IDX, ROCKER_PCI_MSIX_PBA_OFFSET,
> >                      0, &local_err);
> > +
> > +    /* Any error other than -ENOTSUP(board's MSI support is broken)
> > +     * is a programming error. */
> > +    assert(!err || err == -ENOTSUP);
> > +
> >      if (err) {
> >          error_report_err(local_err);
> >          return err;
> > diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c
> > index 7b2971fe5902..a433cc017cb1 100644
> > --- a/hw/net/vmxnet3.c
> > +++ b/hw/net/vmxnet3.c
> > @@ -2193,8 +2193,12 @@ vmxnet3_init_msix(VMXNET3State *s)
> >                          VMXNET3_MSIX_BAR_IDX, VMXNET3_OFF_MSIX_PBA(s),
> >                          VMXNET3_MSIX_OFFSET(s), NULL);
> >  
> > +    /* Any error other than -ENOTSUP(board's MSI support is broken)
> > +     * is a programming error. Fall back to INTx on -ENOTSUP */
> > +    assert(!res || res == -ENOTSUP);
> > +
> >      if (0 > res) {
> > -        VMW_WRPRN("Failed to initialize MSI-X, error %d", res);
> > +        VMW_WRPRN("Failed to initialize MSI-X, board's MSI support is 
> > broken");
> >          s->msix_used = false;
> >      } else {
> >          if (!vmxnet3_use_msix_vectors(s, VMXNET3_MAX_INTRS)) {
> > diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> > index 4c2c4941d245..2417c78c477e 100644
> > --- a/hw/virtio/virtio-pci.c
> > +++ b/hw/virtio/virtio-pci.c
> > @@ -1670,13 +1670,14 @@ static void virtio_pci_device_plugged(DeviceState 
> > *d, Error **errp)
> >  
> >      if (proxy->nvectors) {
> >          int err = msix_init_exclusive_bar(&proxy->pci_dev, proxy->nvectors,
> > -                                          proxy->msix_bar_idx, NULL);
> > +                                          proxy->msix_bar_idx, errp);
> > +
> > +        /* Any error other than -ENOTSUP(board's MSI support is broken)
> > +         * is a programming error. */
> > +        assert(!err || err == -ENOTSUP);
> > +
> >          if (err) {
> > -            /* Notice when a system that supports MSIx can't initialize it 
> > */
> > -            if (err != -ENOTSUP) {
> > -                error_report("unable to init msix vectors to %" PRIu32,
> > -                             proxy->nvectors);
> > -            }
> > +            error_report_err(*errp);
> >              proxy->nvectors = 0;
> >          }
> >      }
> > 
> 
> -- 
> Sincerely,
> Cao jin
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]