[Qemu-devel] [PULL 02/11] hw/arm/cubieboard hw/arm/xlnx-ep108: Fix units_per_default_bus

[Markus Armbruster]

Machine types cubieboard, xlnx-ep108, xlnx-zcu102 have an onboard AHCI
controller, but neglect to set their MachineClass member
units_per_default_bus = 1.  This permits -drive if=ide,unit=1, which
makes no sense for AHCI.  It also screws up index=N for odd N, because
it gets desugared to unit=1,bus=N/2

Doesn't really matter, because these machine types fail to honor
-drive if=ide.  Add the missing units_per_default_bus = 1 anyway,
along with a TODO comment on what needs to be done for -drive if=ide.

Also set block_default_type = IF_IDE explicitly.  It's currently the
default, but the next commit will change it to something more
sensible, and we want to keep the IF_IDE default for these three
machines.  See also the previous commit.

Cc: Beniamino Galvani <address@hidden>
Cc: Alistair Francis <address@hidden>
Cc: "Edgar E. Iglesias" <address@hidden>
Cc: Peter Maydell <address@hidden>
Cc: address@hidden
Signed-off-by: Markus Armbruster <address@hidden>
Acked-by: Alistair Francis <address@hidden>
Message-Id: <address@hidden>
---
 hw/arm/cubieboard.c | 4 ++++
 hw/arm/xlnx-ep108.c | 6 ++++++
 2 files changed, 10 insertions(+)

diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c
index dd19ba3..b98e1c4 100644
--- a/hw/arm/cubieboard.c
+++ b/hw/arm/cubieboard.c
@@ -71,6 +71,8 @@ static void cubieboard_init(MachineState *machine)
     memory_region_add_subregion(get_system_memory(), AW_A10_SDRAM_BASE,
                                 &s->sdram);
 
+    /* TODO create and connect IDE devices for ide_drive_get() */
+
     cubieboard_binfo.ram_size = machine->ram_size;
     cubieboard_binfo.kernel_filename = machine->kernel_filename;
     cubieboard_binfo.kernel_cmdline = machine->kernel_cmdline;
@@ -82,6 +84,8 @@ static void cubieboard_machine_init(MachineClass *mc)
 {
     mc->desc = "cubietech cubieboard";
     mc->init = cubieboard_init;
+    mc->block_default_type = IF_IDE;
+    mc->units_per_default_bus = 1;
 }
 
 DEFINE_MACHINE("cubieboard", cubieboard_machine_init)
diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
index 4ec590a..860780a 100644
--- a/hw/arm/xlnx-ep108.c
+++ b/hw/arm/xlnx-ep108.c
@@ -106,6 +106,8 @@ static void xlnx_ep108_init(MachineState *machine)
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi[i]), 1, cs_line);
     }
 
+    /* TODO create and connect IDE devices for ide_drive_get() */
+
     xlnx_ep108_binfo.ram_size = ram_size;
     xlnx_ep108_binfo.kernel_filename = machine->kernel_filename;
     xlnx_ep108_binfo.kernel_cmdline = machine->kernel_cmdline;
@@ -118,6 +120,8 @@ static void xlnx_ep108_machine_init(MachineClass *mc)
 {
     mc->desc = "Xilinx ZynqMP EP108 board";
     mc->init = xlnx_ep108_init;
+    mc->block_default_type = IF_IDE;
+    mc->units_per_default_bus = 1;
 }
 
 DEFINE_MACHINE("xlnx-ep108", xlnx_ep108_machine_init)
@@ -126,6 +130,8 @@ static void xlnx_zcu102_machine_init(MachineClass *mc)
 {
     mc->desc = "Xilinx ZynqMP ZCU102 board";
     mc->init = xlnx_ep108_init;
+    mc->block_default_type = IF_IDE;
+    mc->units_per_default_bus = 1;
 }
 
 DEFINE_MACHINE("xlnx-zcu102", xlnx_zcu102_machine_init)
-- 
2.7.4