[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 2/9] xen: import ring.h from xen
From: |
Stefano Stabellini |
Subject: |
Re: [Qemu-devel] [PATCH v2 2/9] xen: import ring.h from xen |
Date: |
Wed, 15 Mar 2017 12:04:07 -0700 (PDT) |
User-agent: |
Alpine 2.10 (DEB 1266 2009-07-14) |
On Wed, 15 Mar 2017, Greg Kurz wrote:
> On Wed, 15 Mar 2017 11:36:12 -0700 (PDT)
> Stefano Stabellini <address@hidden> wrote:
>
> > On Wed, 15 Mar 2017, Greg Kurz wrote:
> > > On Mon, 13 Mar 2017 16:55:53 -0700
> > > Stefano Stabellini <address@hidden> wrote:
> > >
> > > > Do not use the ring.h header installed on the system. Instead, import
> > > > the header into the QEMU codebase. This avoids problems when QEMU is
> > > > built against a Xen version too old to provide all the ring macros.
> > > >
> > >
> > > What kind of problems ?
> >
> > The FLEX macros are only available in Xen 4.9+ (still unreleased).
> > However, aside from these macros, the Xen 9pfs frontends and backends
> > could work fine on any Xen releases. In fact, the Xen public/io headers
> > are only provided as reference.
> >
>
> Ok.
>
> >
> > > > Signed-off-by: Stefano Stabellini <address@hidden>
> > > > CC: address@hidden
> > > > CC: address@hidden
> > > > ---
> > > > NB: The new macros have not been committed to Xen yet. Do not apply this
> > > > patch until they do.
> > >
> > > Why ? Does this break compat with older Xen ?
> >
> > No, it does not break compatibility. But I think it is a good idea to
> > commit the header to QEMU only after the corresponding Xen header has
> > been accepted. I don't want the two to diverge.
> >
>
> Fair enough but this will put the entire patchset on hold then. When Xen 4.9
> is supposed to be released ?
In a few months, but I don't think we need to wait until the release,
just for the reviewed-by on the new macros, that should come soon.
> > > > ---
> > > > ---
> > > > hw/block/xen_blkif.h | 2 +-
> > > > hw/usb/xen-usb.c | 2 +-
> > > > include/hw/xen/io/ring.h | 455
> > > > +++++++++++++++++++++++++++++++++++++++++++++++
> > > > 3 files changed, 457 insertions(+), 2 deletions(-)
> > > > create mode 100644 include/hw/xen/io/ring.h
> > > >
> > > > diff --git a/hw/block/xen_blkif.h b/hw/block/xen_blkif.h
> > > > index 3300b6f..3e6e1ea 100644
> > > > --- a/hw/block/xen_blkif.h
> > > > +++ b/hw/block/xen_blkif.h
> > > > @@ -1,7 +1,7 @@
> > > > #ifndef XEN_BLKIF_H
> > > > #define XEN_BLKIF_H
> > > >
> > > > -#include <xen/io/ring.h>
> > > > +#include "hw/xen/io/ring.h"
> > > > #include <xen/io/blkif.h>
> > > > #include <xen/io/protocols.h>
> > > >
> > > > diff --git a/hw/usb/xen-usb.c b/hw/usb/xen-usb.c
> > > > index 8e676e6..370b3d9 100644
> > > > --- a/hw/usb/xen-usb.c
> > > > +++ b/hw/usb/xen-usb.c
> > > > @@ -33,7 +33,7 @@
> > > > #include "qapi/qmp/qint.h"
> > > > #include "qapi/qmp/qstring.h"
> > > >
> > > > -#include <xen/io/ring.h>
> > > > +#include "hw/xen/io/ring.h"
> > > > #include <xen/io/usbif.h>
> > > >
> > > > /*
> > > > diff --git a/include/hw/xen/io/ring.h b/include/hw/xen/io/ring.h
> > > > new file mode 100644
> > > > index 0000000..cf01fc3
> > > > --- /dev/null
> > > > +++ b/include/hw/xen/io/ring.h
> > > > @@ -0,0 +1,455 @@
> > > > +/******************************************************************************
> > > > + * ring.h
> > > > + *
> > > > + * Shared producer-consumer ring macros.
> > > > + *
> > > > + * Permission is hereby granted, free of charge, to any person
> > > > obtaining a copy
> > > > + * of this software and associated documentation files (the
> > > > "Software"), to
> > > > + * deal in the Software without restriction, including without
> > > > limitation the
> > > > + * rights to use, copy, modify, merge, publish, distribute,
> > > > sublicense, and/or
> > > > + * sell copies of the Software, and to permit persons to whom the
> > > > Software is
> > > > + * furnished to do so, subject to the following conditions:
> > > > + *
> > > > + * The above copyright notice and this permission notice shall be
> > > > included in
> > > > + * all copies or substantial portions of the Software.
> > > > + *
> > > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > > > EXPRESS OR
> > > > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > > > MERCHANTABILITY,
> > > > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
> > > > SHALL THE
> > > > + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
> > > > OTHER
> > > > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> > > > ARISING
> > > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> > > > + * DEALINGS IN THE SOFTWARE.
> > > > + *
> > > > + * Tim Deegan and Andrew Warfield November 2004.
> > > > + */
> > > > +
> > > > +#ifndef __XEN_PUBLIC_IO_RING_H__
> > > > +#define __XEN_PUBLIC_IO_RING_H__
> > > > +
> > > > +#if __XEN_INTERFACE_VERSION__ < 0x00030208
> > > > +#define xen_mb() mb()
> > > > +#define xen_rmb() rmb()
> > > > +#define xen_wmb() wmb()
> > > > +#endif
> > > > +
> > > > +typedef unsigned int RING_IDX;
> > > > +
> > > > +/* Round a 32-bit unsigned constant down to the nearest power of two.
> > > > */
> > > > +#define __RD2(_x) (((_x) & 0x00000002) ? 0x2 : ((_x)
> > > > & 0x1))
> > > > +#define __RD4(_x) (((_x) & 0x0000000c) ? __RD2((_x)>>2)<<2 :
> > > > __RD2(_x))
> > > > +#define __RD8(_x) (((_x) & 0x000000f0) ? __RD4((_x)>>4)<<4 :
> > > > __RD4(_x))
> > > > +#define __RD16(_x) (((_x) & 0x0000ff00) ? __RD8((_x)>>8)<<8 :
> > > > __RD8(_x))
> > > > +#define __RD32(_x) (((_x) & 0xffff0000) ? __RD16((_x)>>16)<<16 :
> > > > __RD16(_x))
> > > > +
> > > > +/*
> > > > + * Calculate size of a shared ring, given the total available space
> > > > for the
> > > > + * ring and indexes (_sz), and the name tag of the request/response
> > > > structure.
> > > > + * A ring contains as many entries as will fit, rounded down to the
> > > > nearest
> > > > + * power of two (so we can mask with (size-1) to loop around).
> > > > + */
> > > > +#define __CONST_RING_SIZE(_s, _sz) \
> > > > + (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
> > > > + sizeof(((struct _s##_sring *)0)->ring[0])))
> > > > +/*
> > > > + * The same for passing in an actual pointer instead of a name tag.
> > > > + */
> > > > +#define __RING_SIZE(_s, _sz) \
> > > > + (__RD32(((_sz) - (long)(_s)->ring + (long)(_s)) /
> > > > sizeof((_s)->ring[0])))
> > > > +
> > > > +/*
> > > > + * Macros to make the correct C datatypes for a new kind of ring.
> > > > + *
> > > > + * To make a new ring datatype, you need to have two message
> > > > structures,
> > > > + * let's say request_t, and response_t already defined.
> > > > + *
> > > > + * In a header where you want the ring datatype declared, you then do:
> > > > + *
> > > > + * DEFINE_RING_TYPES(mytag, request_t, response_t);
> > > > + *
> > > > + * These expand out to give you a set of types, as you can see below.
> > > > + * The most important of these are:
> > > > + *
> > > > + * mytag_sring_t - The shared ring.
> > > > + * mytag_front_ring_t - The 'front' half of the ring.
> > > > + * mytag_back_ring_t - The 'back' half of the ring.
> > > > + *
> > > > + * To initialize a ring in your code you need to know the location and
> > > > size
> > > > + * of the shared memory area (PAGE_SIZE, for instance). To initialise
> > > > + * the front half:
> > > > + *
> > > > + * mytag_front_ring_t front_ring;
> > > > + * SHARED_RING_INIT((mytag_sring_t *)shared_page);
> > > > + * FRONT_RING_INIT(&front_ring, (mytag_sring_t *)shared_page,
> > > > PAGE_SIZE);
> > > > + *
> > > > + * Initializing the back follows similarly (note that only the front
> > > > + * initializes the shared ring):
> > > > + *
> > > > + * mytag_back_ring_t back_ring;
> > > > + * BACK_RING_INIT(&back_ring, (mytag_sring_t *)shared_page,
> > > > PAGE_SIZE);
> > > > + */
> > > > +
> > > > +#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t)
> > > > \
> > > > +
> > > > \
> > > > +/* Shared ring entry */
> > > > \
> > > > +union __name##_sring_entry {
> > > > \
> > > > + __req_t req;
> > > > \
> > > > + __rsp_t rsp;
> > > > \
> > > > +};
> > > > \
> > > > +
> > > > \
> > > > +/* Shared ring page */
> > > > \
> > > > +struct __name##_sring {
> > > > \
> > > > + RING_IDX req_prod, req_event;
> > > > \
> > > > + RING_IDX rsp_prod, rsp_event;
> > > > \
> > > > + union {
> > > > \
> > > > + struct {
> > > > \
> > > > + uint8_t smartpoll_active;
> > > > \
> > > > + } netif;
> > > > \
> > > > + struct {
> > > > \
> > > > + uint8_t msg;
> > > > \
> > > > + } tapif_user;
> > > > \
> > > > + uint8_t pvt_pad[4];
> > > > \
> > > > + } pvt;
> > > > \
> > > > + uint8_t __pad[44];
> > > > \
> > > > + union __name##_sring_entry ring[1]; /* variable-length */
> > > > \
> > > > +};
> > > > \
> > > > +
> > > > \
> > > > +/* "Front" end's private variables */
> > > > \
> > > > +struct __name##_front_ring {
> > > > \
> > > > + RING_IDX req_prod_pvt;
> > > > \
> > > > + RING_IDX rsp_cons;
> > > > \
> > > > + unsigned int nr_ents;
> > > > \
> > > > + struct __name##_sring *sring;
> > > > \
> > > > +};
> > > > \
> > > > +
> > > > \
> > > > +/* "Back" end's private variables */
> > > > \
> > > > +struct __name##_back_ring {
> > > > \
> > > > + RING_IDX rsp_prod_pvt;
> > > > \
> > > > + RING_IDX req_cons;
> > > > \
> > > > + unsigned int nr_ents;
> > > > \
> > > > + struct __name##_sring *sring;
> > > > \
> > > > +};
> > > > \
> > > > +
> > > > \
> > > > +/* Syntactic sugar */
> > > > \
> > > > +typedef struct __name##_sring __name##_sring_t;
> > > > \
> > > > +typedef struct __name##_front_ring __name##_front_ring_t;
> > > > \
> > > > +typedef struct __name##_back_ring __name##_back_ring_t
> > > > +
> > > > +/*
> > > > + * Macros for manipulating rings.
> > > > + *
> > > > + * FRONT_RING_whatever works on the "front end" of a ring: here
> > > > + * requests are pushed on to the ring and responses taken off it.
> > > > + *
> > > > + * BACK_RING_whatever works on the "back end" of a ring: here
> > > > + * requests are taken off the ring and responses put on.
> > > > + *
> > > > + * N.B. these macros do NO INTERLOCKS OR FLOW CONTROL.
> > > > + * This is OK in 1-for-1 request-response situations where the
> > > > + * requestor (front end) never has more than RING_SIZE()-1
> > > > + * outstanding requests.
> > > > + */
> > > > +
> > > > +/* Initialising empty rings */
> > > > +#define SHARED_RING_INIT(_s) do {
> > > > \
> > > > + (_s)->req_prod = (_s)->rsp_prod = 0;
> > > > \
> > > > + (_s)->req_event = (_s)->rsp_event = 1;
> > > > \
> > > > + (void)memset((_s)->pvt.pvt_pad, 0, sizeof((_s)->pvt.pvt_pad));
> > > > \
> > > > + (void)memset((_s)->__pad, 0, sizeof((_s)->__pad));
> > > > \
> > > > +} while(0)
> > > > +
> > > > +#define FRONT_RING_INIT(_r, _s, __size) do {
> > > > \
> > > > + (_r)->req_prod_pvt = 0;
> > > > \
> > > > + (_r)->rsp_cons = 0;
> > > > \
> > > > + (_r)->nr_ents = __RING_SIZE(_s, __size);
> > > > \
> > > > + (_r)->sring = (_s);
> > > > \
> > > > +} while (0)
> > > > +
> > > > +#define BACK_RING_INIT(_r, _s, __size) do {
> > > > \
> > > > + (_r)->rsp_prod_pvt = 0;
> > > > \
> > > > + (_r)->req_cons = 0;
> > > > \
> > > > + (_r)->nr_ents = __RING_SIZE(_s, __size);
> > > > \
> > > > + (_r)->sring = (_s);
> > > > \
> > > > +} while (0)
> > > > +
> > > > +/* How big is this ring? */
> > > > +#define RING_SIZE(_r)
> > > > \
> > > > + ((_r)->nr_ents)
> > > > +
> > > > +/* Number of free requests (for use on front side only). */
> > > > +#define RING_FREE_REQUESTS(_r)
> > > > \
> > > > + (RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons))
> > > > +
> > > > +/* Test if there is an empty slot available on the front ring.
> > > > + * (This is only meaningful from the front. )
> > > > + */
> > > > +#define RING_FULL(_r)
> > > > \
> > > > + (RING_FREE_REQUESTS(_r) == 0)
> > > > +
> > > > +/* Test if there are outstanding messages to be processed on a ring. */
> > > > +#define RING_HAS_UNCONSUMED_RESPONSES(_r)
> > > > \
> > > > + ((_r)->sring->rsp_prod - (_r)->rsp_cons)
> > > > +
> > > > +#ifdef __GNUC__
> > > > +#define RING_HAS_UNCONSUMED_REQUESTS(_r) ({
> > > > \
> > > > + unsigned int req = (_r)->sring->req_prod - (_r)->req_cons;
> > > > \
> > > > + unsigned int rsp = RING_SIZE(_r) -
> > > > \
> > > > + ((_r)->req_cons - (_r)->rsp_prod_pvt);
> > > > \
> > > > + req < rsp ? req : rsp;
> > > > \
> > > > +})
> > > > +#else
> > > > +/* Same as above, but without the nice GCC ({ ... }) syntax. */
> > > > +#define RING_HAS_UNCONSUMED_REQUESTS(_r)
> > > > \
> > > > + ((((_r)->sring->req_prod - (_r)->req_cons) <
> > > > \
> > > > + (RING_SIZE(_r) - ((_r)->req_cons - (_r)->rsp_prod_pvt))) ?
> > > > \
> > > > + ((_r)->sring->req_prod - (_r)->req_cons) :
> > > > \
> > > > + (RING_SIZE(_r) - ((_r)->req_cons - (_r)->rsp_prod_pvt)))
> > > > +#endif
> > > > +
> > > > +/* Direct access to individual ring elements, by index. */
> > > > +#define RING_GET_REQUEST(_r, _idx)
> > > > \
> > > > + (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
> > > > +
> > > > +/*
> > > > + * Get a local copy of a request.
> > > > + *
> > > > + * Use this in preference to RING_GET_REQUEST() so all processing is
> > > > + * done on a local copy that cannot be modified by the other end.
> > > > + *
> > > > + * Note that https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may
> > > > cause this
> > > > + * to be ineffective where _req is a struct which consists of only
> > > > bitfields.
> > > > + */
> > > > +#define RING_COPY_REQUEST(_r, _idx, _req) do {
> > > > \
> > > > + /* Use volatile to force the copy into _req. */
> > > > \
> > > > + *(_req) = *(volatile typeof(_req))RING_GET_REQUEST(_r, _idx);
> > > > \
> > > > +} while (0)
> > > > +
> > > > +#define RING_GET_RESPONSE(_r, _idx)
> > > > \
> > > > + (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
> > > > +
> > > > +/* Loop termination condition: Would the specified index overflow the
> > > > ring? */
> > > > +#define RING_REQUEST_CONS_OVERFLOW(_r, _cons)
> > > > \
> > > > + (((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r))
> > > > +
> > > > +/* Ill-behaved frontend determination: Can there be this many
> > > > requests? */
> > > > +#define RING_REQUEST_PROD_OVERFLOW(_r, _prod)
> > > > \
> > > > + (((_prod) - (_r)->rsp_prod_pvt) > RING_SIZE(_r))
> > > > +
> > > > +#define RING_PUSH_REQUESTS(_r) do {
> > > > \
> > > > + xen_wmb(); /* back sees requests /before/ updated producer index
> > > > */ \
> > > > + (_r)->sring->req_prod = (_r)->req_prod_pvt;
> > > > \
> > > > +} while (0)
> > > > +
> > > > +#define RING_PUSH_RESPONSES(_r) do {
> > > > \
> > > > + xen_wmb(); /* front sees resps /before/ updated producer index */
> > > > \
> > > > + (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt;
> > > > \
> > > > +} while (0)
> > > > +
> > > > +/*
> > > > + * Notification hold-off (req_event and rsp_event):
> > > > + *
> > > > + * When queueing requests or responses on a shared ring, it may not
> > > > always be
> > > > + * necessary to notify the remote end. For example, if requests are in
> > > > flight
> > > > + * in a backend, the front may be able to queue further requests
> > > > without
> > > > + * notifying the back (if the back checks for new requests when it
> > > > queues
> > > > + * responses).
> > > > + *
> > > > + * When enqueuing requests or responses:
> > > > + *
> > > > + * Use RING_PUSH_{REQUESTS,RESPONSES}_AND_CHECK_NOTIFY(). The second
> > > > argument
> > > > + * is a boolean return value. True indicates that the receiver
> > > > requires an
> > > > + * asynchronous notification.
> > > > + *
> > > > + * After dequeuing requests or responses (before sleeping the
> > > > connection):
> > > > + *
> > > > + * Use RING_FINAL_CHECK_FOR_REQUESTS() or
> > > > RING_FINAL_CHECK_FOR_RESPONSES().
> > > > + * The second argument is a boolean return value. True indicates that
> > > > there
> > > > + * are pending messages on the ring (i.e., the connection should not
> > > > be put
> > > > + * to sleep).
> > > > + *
> > > > + * These macros will set the req_event/rsp_event field to trigger a
> > > > + * notification on the very next message that is enqueued. If you
> > > > want to
> > > > + * create batches of work (i.e., only receive a notification after
> > > > several
> > > > + * messages have been enqueued) then you will need to create a
> > > > customised
> > > > + * version of the FINAL_CHECK macro in your own code, which sets the
> > > > event
> > > > + * field appropriately.
> > > > + */
> > > > +
> > > > +#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do {
> > > > \
> > > > + RING_IDX __old = (_r)->sring->req_prod;
> > > > \
> > > > + RING_IDX __new = (_r)->req_prod_pvt;
> > > > \
> > > > + xen_wmb(); /* back sees requests /before/ updated producer index
> > > > */ \
> > > > + (_r)->sring->req_prod = __new;
> > > > \
> > > > + xen_mb(); /* back sees new requests /before/ we check req_event */
> > > > \
> > > > + (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) <
> > > > \
> > > > + (RING_IDX)(__new - __old));
> > > > \
> > > > +} while (0)
> > > > +
> > > > +#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do {
> > > > \
> > > > + RING_IDX __old = (_r)->sring->rsp_prod;
> > > > \
> > > > + RING_IDX __new = (_r)->rsp_prod_pvt;
> > > > \
> > > > + xen_wmb(); /* front sees resps /before/ updated producer index */
> > > > \
> > > > + (_r)->sring->rsp_prod = __new;
> > > > \
> > > > + xen_mb(); /* front sees new resps /before/ we check rsp_event */
> > > > \
> > > > + (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) <
> > > > \
> > > > + (RING_IDX)(__new - __old));
> > > > \
> > > > +} while (0)
> > > > +
> > > > +#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do {
> > > > \
> > > > + (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);
> > > > \
> > > > + if (_work_to_do) break;
> > > > \
> > > > + (_r)->sring->req_event = (_r)->req_cons + 1;
> > > > \
> > > > + xen_mb();
> > > > \
> > > > + (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);
> > > > \
> > > > +} while (0)
> > > > +
> > > > +#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do {
> > > > \
> > > > + (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);
> > > > \
> > > > + if (_work_to_do) break;
> > > > \
> > > > + (_r)->sring->rsp_event = (_r)->rsp_cons + 1;
> > > > \
> > > > + xen_mb();
> > > > \
> > > > + (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);
> > > > \
> > > > +} while (0)
> > > > +
> > > > +
> > > > +/*
> > > > + * DEFINE_XEN_FLEX_RING_AND_INTF defines two monodirectional rings and
> > > > + * functions to check if there is data on the ring, and to read and
> > > > + * write to them.
> > > > + *
> > > > + * DEFINE_XEN_FLEX_RING is similar to DEFINE_XEN_FLEX_RING_AND_INTF,
> > > > but
> > > > + * does not define the indexes page. As different protocols can have
> > > > + * extensions to the basic format, this macro allow them to define
> > > > their
> > > > + * own struct.
> > > > + *
> > > > + * XEN_FLEX_RING_SIZE
> > > > + * Convenience macro to calculate the size of one of the two rings
> > > > + * from the overall order.
> > > > + *
> > > > + * $NAME_mask
> > > > + * Function to apply the size mask to an index, to reduce the index
> > > > + * within the range [0-size].
> > > > + *
> > > > + * $NAME_read_packet
> > > > + * Function to read data from the ring. The amount of data to read is
> > > > + * specified by the "size" argument.
> > > > + *
> > > > + * $NAME_write_packet
> > > > + * Function to write data to the ring. The amount of data to write is
> > > > + * specified by the "size" argument.
> > > > + *
> > > > + * $NAME_get_ring_ptr
> > > > + * Convenience function that returns a pointer to read/write to the
> > > > + * ring at the right location.
> > > > + *
> > > > + * $NAME_data_intf
> > > > + * Indexes page, shared between frontend and backend. It also
> > > > + * contains the array of grant refs.
> > > > + *
> > > > + * $NAME_queued
> > > > + * Function to calculate how many bytes are currently on the ring,
> > > > + * ready to be read. It can also be used to calculate how much free
> > > > + * space is currently on the ring (ring_size - $NAME_queued()).
> > > > + */
> > > > +#define XEN_FLEX_RING_SIZE(order)
> > > > \
> > > > + (1UL << (order + PAGE_SHIFT - 1))
> > > > +
> > > > +#define DEFINE_XEN_FLEX_RING_AND_INTF(name)
> > > > \
> > > > +struct name##_data_intf {
> > > > \
> > > > + RING_IDX in_cons, in_prod;
> > > > \
> > > > +
> > > > \
> > > > + uint8_t pad1[56];
> > > > \
> > > > +
> > > > \
> > > > + RING_IDX out_cons, out_prod;
> > > > \
> > > > +
> > > > \
> > > > + uint8_t pad2[56];
> > > > \
> > > > +
> > > > \
> > > > + RING_IDX ring_order;
> > > > \
> > > > + grant_ref_t ref[];
> > > > \
> > > > +};
> > > > \
> > > > +DEFINE_XEN_FLEX_RING(name);
> > > > +
> > > > +#define DEFINE_XEN_FLEX_RING(name)
> > > > \
> > > > +static inline RING_IDX name##_mask(RING_IDX idx, RING_IDX ring_size)
> > > > \
> > > > +{
> > > > \
> > > > + return (idx & (ring_size - 1));
> > > > \
> > > > +}
> > > > \
> > > > +
> > > > \
> > > > +static inline RING_IDX name##_mask_order(RING_IDX idx, RING_IDX
> > > > ring_order) \
> > > > +{
> > > > \
> > > > + return (idx & (XEN_FLEX_RING_SIZE(ring_order) - 1));
> > > > \
> > > > +}
> > > > \
> > > > +
> > > > \
> > > > +static inline unsigned char* name##_get_ring_ptr(unsigned char *buf,
> > > > \
> > > > + RING_IDX idx,
> > > > \
> > > > + RING_IDX ring_order)
> > > > \
> > > > +{
> > > > \
> > > > + return buf + name##_mask_order(idx, ring_order);
> > > > \
> > > > +}
> > > > \
> > > > +
> > > > \
> > > > +static inline void name##_read_packet(const unsigned char *buf,
> > > > \
> > > > + RING_IDX masked_prod, RING_IDX *masked_cons,
> > > > \
> > > > + RING_IDX ring_size, void *opaque, size_t size) {
> > > > \
> > > > + if (*masked_cons < masked_prod ||
> > > > \
> > > > + size <= ring_size - *masked_cons) {
> > > > \
> > > > + memcpy(opaque, buf + *masked_cons, size);
> > > > \
> > > > + } else {
> > > > \
> > > > + memcpy(opaque, buf + *masked_cons, ring_size - *masked_cons);
> > > > \
> > > > + memcpy((unsigned char *)opaque + ring_size - *masked_cons,
> > > > buf, \
> > > > + size - (ring_size - *masked_cons));
> > > > \
> > > > + }
> > > > \
> > > > + *masked_cons = name##_mask(*masked_cons + size, ring_size);
> > > > \
> > > > +}
> > > > \
> > > > +
> > > > \
> > > > +static inline void name##_write_packet(unsigned char *buf,
> > > > \
> > > > + RING_IDX *masked_prod, RING_IDX masked_cons,
> > > > \
> > > > + RING_IDX ring_size, const void *opaque, size_t size) {
> > > > \
> > > > + if (*masked_prod < masked_cons ||
> > > > \
> > > > + size <= ring_size - *masked_prod) {
> > > > \
> > > > + memcpy(buf + *masked_prod, opaque, size);
> > > > \
> > > > + } else {
> > > > \
> > > > + memcpy(buf + *masked_prod, opaque, ring_size - *masked_prod);
> > > > \
> > > > + memcpy(buf, (unsigned char *)opaque + (ring_size -
> > > > *masked_prod), \
> > > > + size - (ring_size - *masked_prod));
> > > > \
> > > > + }
> > > > \
> > > > + *masked_prod = name##_mask(*masked_prod + size, ring_size);
> > > > \
> > > > +}
> > > > \
> > > > +
> > > > \
> > > > +struct name##_data {
> > > > \
> > > > + unsigned char *in; /* half of the allocation */
> > > > \
> > > > + unsigned char *out; /* half of the allocation */
> > > > \
> > > > +};
> > > > \
> > > > +
> > > > \
> > > > +
> > > > \
> > > > +static inline RING_IDX name##_queued(RING_IDX prod,
> > > > \
> > > > + RING_IDX cons, RING_IDX ring_size)
> > > > \
> > > > +{
> > > > \
> > > > + RING_IDX size;
> > > > \
> > > > +
> > > > \
> > > > + if (prod == cons)
> > > > \
> > > > + return 0;
> > > > \
> > > > +
> > > > \
> > > > + prod = name##_mask(prod, ring_size);
> > > > \
> > > > + cons = name##_mask(cons, ring_size);
> > > > \
> > > > +
> > > > \
> > > > + if (prod == cons)
> > > > \
> > > > + return ring_size;
> > > > \
> > > > +
> > > > \
> > > > + if (prod > cons)
> > > > \
> > > > + size = prod - cons;
> > > > \
> > > > + else
> > > > \
> > > > + size = ring_size - (cons - prod);
> > > > \
> > > > + return size;
> > > > \
> > > > +};
> > > > +
> > > > +#endif /* __XEN_PUBLIC_IO_RING_H__ */
> > > > +
> > > > +/*
> > > > + * Local variables:
> > > > + * mode: C
> > > > + * c-file-style: "BSD"
> > > > + * c-basic-offset: 4
> > > > + * tab-width: 4
> > > > + * indent-tabs-mode: nil
> > > > + * End:
> > > > + */
> > >
> > >
>
>
[Qemu-devel] [PATCH v2 4/9] xen/9pfs: introduce Xen 9pfs backend, Stefano Stabellini, 2017/03/13
[Qemu-devel] [PATCH v2 5/9] xen/9pfs: connect to the frontend, Stefano Stabellini, 2017/03/13
Re: [Qemu-devel] [PATCH v2 5/9] xen/9pfs: connect to the frontend, Greg Kurz, 2017/03/15
Re: [Qemu-devel] [PATCH v2 5/9] xen/9pfs: connect to the frontend, Stefano Stabellini, 2017/03/15
[Qemu-devel] [PATCH v2 7/9] xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal, Stefano Stabellini, 2017/03/13