[Qemu-devel] [PULL 2/4] xen: do not build backends for targets that do not support xen

[Paolo Bonzini]

From: Stefano Stabellini <address@hidden>

Change Makefile.objs to use CONFIG_XEN instead of CONFIG_XEN_BACKEND, so
that the Xen backends are only built for targets that support Xen.

Set CONFIG_XEN in the toplevel Makefile to ensure that files that are
built only once pick up Xen support properly.

Signed-off-by: Stefano Stabellini <address@hidden>
Tested-by: Greg Kurz <address@hidden>
Reviewed-by: Greg Kurz <address@hidden>
CC: address@hidden
CC: address@hidden
CC: address@hidden
CC: address@hidden
Message-Id: <address@hidden>
Signed-off-by: Paolo Bonzini <address@hidden>
---
 Makefile                 | 1 +
 hw/block/Makefile.objs   | 2 +-
 hw/char/Makefile.objs    | 2 +-
 hw/display/Makefile.objs | 2 +-
 hw/net/Makefile.objs     | 2 +-
 hw/usb/Makefile.objs     | 2 +-
 hw/xen/Makefile.objs     | 2 +-
 7 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/Makefile b/Makefile
index 73e0c12..f4f90df 100644
--- a/Makefile
+++ b/Makefile
@@ -26,6 +26,7 @@ endif
 
 CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y)
 CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y)
+CONFIG_XEN := $(CONFIG_XEN_BACKEND)
 CONFIG_ALL=y
 -include config-all-devices.mak
 -include config-all-disas.mak
diff --git a/hw/block/Makefile.objs b/hw/block/Makefile.objs
index d4c3ab7..e0ed980 100644
--- a/hw/block/Makefile.objs
+++ b/hw/block/Makefile.objs
@@ -4,7 +4,7 @@ common-obj-$(CONFIG_SSI_M25P80) += m25p80.o
 common-obj-$(CONFIG_NAND) += nand.o
 common-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
 common-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
-common-obj-$(CONFIG_XEN_BACKEND) += xen_disk.o
+common-obj-$(CONFIG_XEN) += xen_disk.o
 common-obj-$(CONFIG_ECC) += ecc.o
 common-obj-$(CONFIG_ONENAND) += onenand.o
 common-obj-$(CONFIG_NVME_PCI) += nvme.o
diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
index 6ea76fe..725fdc4 100644
--- a/hw/char/Makefile.objs
+++ b/hw/char/Makefile.objs
@@ -7,7 +7,7 @@ common-obj-$(CONFIG_SERIAL_ISA) += serial-isa.o
 common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o
 common-obj-$(CONFIG_VIRTIO) += virtio-console.o
 common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
-common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o
+common-obj-$(CONFIG_XEN) += xen_console.o
 common-obj-$(CONFIG_CADENCE) += cadence_uart.o
 
 obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o
diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs
index 063889b..3d02e8b 100644
--- a/hw/display/Makefile.objs
+++ b/hw/display/Makefile.objs
@@ -5,7 +5,7 @@ common-obj-$(CONFIG_JAZZ_LED) += jazz_led.o
 common-obj-$(CONFIG_PL110) += pl110.o
 common-obj-$(CONFIG_SSD0303) += ssd0303.o
 common-obj-$(CONFIG_SSD0323) += ssd0323.o
-common-obj-$(CONFIG_XEN_BACKEND) += xenfb.o
+common-obj-$(CONFIG_XEN) += xenfb.o
 
 common-obj-$(CONFIG_VGA_PCI) += vga-pci.o
 common-obj-$(CONFIG_VGA_ISA) += vga-isa.o
diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
index 610ed3e..6a95d92 100644
--- a/hw/net/Makefile.objs
+++ b/hw/net/Makefile.objs
@@ -1,5 +1,5 @@
 common-obj-$(CONFIG_DP8393X) += dp8393x.o
-common-obj-$(CONFIG_XEN_BACKEND) += xen_nic.o
+common-obj-$(CONFIG_XEN) += xen_nic.o
 
 # PCI network cards
 common-obj-$(CONFIG_NE2000_PCI) += ne2000.o
diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
index 98b5c9d..5958be8 100644
--- a/hw/usb/Makefile.objs
+++ b/hw/usb/Makefile.objs
@@ -40,5 +40,5 @@ common-obj-$(CONFIG_USB_REDIR) += redirect.o quirks.o
 common-obj-y += $(patsubst %,host-%.o,$(HOST_USB))
 
 ifeq ($(CONFIG_USB_LIBUSB),y)
-common-obj-$(CONFIG_XEN_BACKEND) += xen-usb.o
+common-obj-$(CONFIG_XEN) += xen-usb.o
 endif
diff --git a/hw/xen/Makefile.objs b/hw/xen/Makefile.objs
index 591cdc2..4be3ec9 100644
--- a/hw/xen/Makefile.objs
+++ b/hw/xen/Makefile.objs
@@ -1,5 +1,5 @@
 # xen backend driver support
-common-obj-$(CONFIG_XEN_BACKEND) += xen_backend.o xen_devconfig.o xen_pvdev.o
+common-obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o xen_pvdev.o
 
 obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o
 obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pt.o xen_pt_config_init.o 
xen_pt_graphics.o xen_pt_msi.o
-- 
2.9.3