qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH RESEND] xen: limit pkg-config to PKG_CONFIG_PATH


From: Paul Durrant
Subject: Re: [Qemu-devel] [PATCH RESEND] xen: limit pkg-config to PKG_CONFIG_PATH for xen libraries
Date: Fri, 24 Mar 2017 19:17:44 +0000

> -----Original Message-----
> From: Stefano Stabellini [mailto:address@hidden
> Sent: 24 March 2017 19:12
> To: Juergen Gross <address@hidden>
> Cc: Paul Durrant <address@hidden>; address@hidden; xen-
> address@hidden; Anthony Perard <address@hidden>;
> Stefano Stabellini <address@hidden>
> Subject: Re: [PATCH RESEND] xen: limit pkg-config to PKG_CONFIG_PATH for
> xen libraries
> 
> On Fri, 24 Mar 2017, Juergen Gross wrote:
> > On 24/03/17 18:20, Paul Durrant wrote:
> > > The Xen tools Makefile has been modified to set PKG_CONFIG_PATH
> such that
> > > use of pkg-config in QEMU configure finds the newly built Xen libraries.
> > > However, because older versions of Xen do not set PKG_CONFIG_PATH
> in the
> > > Makefile, the QEMU configure script will pick up any Xen libraries that
> may
> > > be installed in the build system rather than the newly built ones. Thus,
> > > if Xen 4.9 is built and installed it becomes impossible to build tools for
> > > an older version of Xen on the same system (without manual de-
> installtion).
> > >
> > > This patch modifies configure to set PKG_CONFIG_LIBDIR to empty when
> > > looking for Xen libraries to ensure the search is limited only to
> > > PKG_CONFIG_PATH. This makes sure that, for versions of Xen prior to
> 4.9,
> > > pkg-config fails to find the Xen libraries an approriately falls back to
> > > previous methods of probing.
> > >
> > > Signed-off-by: Paul Durrant <address@hidden>
> 
> Paul, thanks for spotting this. I didn't spot it because I don't have
> Xen installed in my build environment, but we should not rely on that.
> 
> 
> > NAK. You are breaking normal qemu build with installed Xen pkg-config
> > files.
> 
> The normal QEMU build, done as part of the xen-unstable build, is
> actually done without Xen being installed in the system. So, if I am not
> mistaken, the current mechanism also breaks the following entirely
> legitimate scenario:
> 
> - user has 4.9 installed on her system
> - user git clones xen 4.10
> - user build xen 4.10
>   - as part of the xen build, qemu is cloned and built
>   - the qemu configure script picks up the pkgconfig file from
>     /usr/share and misconfigure the xen version, setting it to 4.9
>     instead of 4.10
>   - the qemu build fails
> - the xen build fails
> 
> Am I right?
>

I think the above would actually work because the 4.10 files would be found 
before the 4.9 files. What fails is installing 4.9 and then trying to build 4.8.
 
> Regardless, both cases need to work correctly. A lot of people rely on
> out of tree builds, including cross-compilations and openembedded. This
> is a regression.
> 
> I suggest we set PKG_CONFIG_LIBDIR (or PKG_CONFIG_PATH?) to the right
> place depending on where the configure script is picking up the Xen
> header files:
> 
> - If the configure script picks up the Xen header files from /usr/include,
> then we want the pkgconfig dir to be /usr/share/pkgconfig.
> 
> - If the configure script picks up the Xen header files from
> /local/xen-unstable.git/tools/libxc/include, then we want the pkgconfig
> dir to be local/xen-unstable.git/tools/pkg-config.
> 

Yes, that's what is needed.

> If that's too complex, we can always go back to the good old,
> non-pkgconfig days.
> 

Unless this can be speedily resolved I think reverting the pkg-config changes 
would be best.

Another possibility perhaps would be an explicit configure flag for in-tree and 
out-of-tree builds so we can say exactly where QEMU should be getting its 
environment from?

  Paul

> 
> > > Cc: Anthony Perard <address@hidden>
> > > Cc: Stefano Stabellini <address@hidden>
> > > Cc: Juergen Gross <address@hidden>
> > > ---
> > >  configure | 12 ++++++++----
> > >  1 file changed, 8 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/configure b/configure
> > > index fdf47e4..6ef5980 100755
> > > --- a/configure
> > > +++ b/configure
> > > @@ -1974,6 +1974,10 @@ fi
> > >  ##########################################
> > >  # xen probe
> > >
> > > +xen_query_pkg_config() {
> > > +    PKG_CONFIG_LIBDIR= ${pkg_config_exe} "$@"
> > > +}
> > > +
> > >  if test "$xen" != "no" ; then
> > >    xen_libs="-lxenstore -lxenctrl -lxenguest"
> > >    xen_stable_libs="-lxenforeignmemory -lxengnttab -lxenevtchn"
> > > @@ -1997,9 +2001,9 @@ EOF
> > >      xen=no
> > >
> > >    # Xen version via pkg-config (Xen 4.9.0 and newer)
> > > -  elif $pkg_config --exists xencontrol ; then
> > > +  elif xen_query_pkg_config --exists xencontrol; then
> > >      xen_ctrl_version="$(printf '%d%02d%02d' \
> > > -      $($pkg_config --modversion xencontrol | sed 's/\./ /g') )"
> > > +      $(xen_query_pkg_config --modversion xencontrol | sed 's/\./ /g') )"
> > >      xen=yes
> > >
> > >    elif
> > > @@ -2216,8 +2220,8 @@ EOF
> > >      if test $xen_ctrl_version -ge 40900 ; then
> > >        xen_pc="xencontrol xenstore xenguest xenforeignmemory
> xengnttab xenevtchn"
> > >        xen_pc="$xen_pc xendevicemodel"
> > > -      xen_libs="$($pkg_config --libs $xen_pc)"
> > > -      QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags $xen_pc)"
> > > +      xen_libs="$(xen_query_pkg_config --libs $xen_pc)"
> > > +      QEMU_CFLAGS="$QEMU_CFLAGS $(xen_query_pkg_config --cflags
> $xen_pc)"
> > >      elif test $xen_ctrl_version -ge 40701 ; then
> > >        libs_softmmu="$xen_stable_libs $libs_softmmu"
> > >      fi
> > >
> >



reply via email to

[Prev in Thread] Current Thread [Next in Thread]