[Qemu-devel] [PATCH v10 16/17] blkdebug: Add ability to override unmap geometries

[Eric Blake]

Make it easier to simulate various unusual hardware setups (for
example, recent commits 3482b9b and b8d0a98 affect the Dell
Equallogic iSCSI with its 15M preferred and maximum unmap and
write zero sizing, or b2f95fe deals with the Linux loopback
block device having a max_transfer of 64k), by allowing blkdebug
to wrap any other device with further restrictions on various
alignments.

Signed-off-by: Eric Blake <address@hidden>
Reviewed-by: Max Reitz <address@hidden>

---
v10: no change
v9: rebase to master (dropped #optional tags)
v7-v8: not submitted (earlier half of series sent for 2.9)
v6: more tweaks in docs and error messages
v5: tweak docs regarding max-transfer minimum
v4: relax 512 byte minimum now that blkdebug is byte-based, fix doc typo
v3: improve legibility of bounds checking, improve docs
v2: new patch
---
 qapi/block-core.json | 33 ++++++++++++++++--
 block/blkdebug.c     | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 125 insertions(+), 4 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 87fb747..2082242 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2430,8 +2430,33 @@
 #
 # @config:          filename of the configuration file
 #
-# @align:           required alignment for requests in bytes,
-#                   must be power of 2, or 0 for default
+# @align:           required alignment for requests in bytes, must be
+#                   positive power of 2, or 0 for default
+#
+# @max-transfer:    maximum size for I/O transfers in bytes, must be
+#                   positive multiple of @align and of the underlying
+#                   file's request alignment (but need not be a power of
+#                   2), or 0 for default (since 2.10)
+#
+# @opt-write-zero:  preferred alignment for write zero requests in bytes,
+#                   must be positive multiple of @align and of the
+#                   underlying file's request alignment (but need not be a
+#                   power of 2), or 0 for default (since 2.10)
+#
+# @max-write-zero:  maximum size for write zero requests in bytes, must be
+#                   positive multiple of @align, of @opt-write-zero, and of
+#                   the underlying file's request alignment (but need not
+#                   be a power of 2), or 0 for default (since 2.10)
+#
+# @opt-discard:     preferred alignment for discard requests in bytes, must
+#                   be positive multiple of @align and of the underlying
+#                   file's request alignment (but need not be a power of
+#                   2), or 0 for default (since 2.10)
+#
+# @max-discard:     maximum size for discard requests in bytes, must be
+#                   positive multiple of @align, of @opt-discard, and of
+#                   the underlying file's request alignment (but need not
+#                   be a power of 2), or 0 for default (since 2.10)
 #
 # @inject-error:    array of error injection descriptions
 #
@@ -2442,7 +2467,9 @@
 { 'struct': 'BlockdevOptionsBlkdebug',
   'data': { 'image': 'BlockdevRef',
             '*config': 'str',
-            '*align': 'int',
+            '*align': 'int', '*max-transfer': 'int32',
+            '*opt-write-zero': 'int32', '*max-write-zero': 'int32',
+            '*opt-discard': 'int32', '*max-discard': 'int32',
             '*inject-error': ['BlkdebugInjectErrorOptions'],
             '*set-state': ['BlkdebugSetStateOptions'] } }

diff --git a/block/blkdebug.c b/block/blkdebug.c
index a1501eb..4ccdceb 100644
--- a/block/blkdebug.c
+++ b/block/blkdebug.c
@@ -39,6 +39,11 @@ typedef struct BDRVBlkdebugState {
     int state;
     int new_state;
     uint64_t align;
+    uint64_t max_transfer;
+    uint64_t opt_write_zero;
+    uint64_t max_write_zero;
+    uint64_t opt_discard;
+    uint64_t max_discard;

     /* For blkdebug_refresh_filename() */
     char *config_file;
@@ -343,6 +348,31 @@ static QemuOptsList runtime_opts = {
             .type = QEMU_OPT_SIZE,
             .help = "Required alignment in bytes",
         },
+        {
+            .name = "max-transfer",
+            .type = QEMU_OPT_SIZE,
+            .help = "Maximum transfer size in bytes",
+        },
+        {
+            .name = "opt-write-zero",
+            .type = QEMU_OPT_SIZE,
+            .help = "Optimum write zero alignment in bytes",
+        },
+        {
+            .name = "max-write-zero",
+            .type = QEMU_OPT_SIZE,
+            .help = "Maximum write zero size in bytes",
+        },
+        {
+            .name = "opt-discard",
+            .type = QEMU_OPT_SIZE,
+            .help = "Optimum discard alignment in bytes",
+        },
+        {
+            .name = "max-discard",
+            .type = QEMU_OPT_SIZE,
+            .help = "Maximum discard size in bytes",
+        },
         { /* end of list */ }
     },
 };
@@ -354,6 +384,7 @@ static int blkdebug_open(BlockDriverState *bs, QDict 
*options, int flags,
     QemuOpts *opts;
     Error *local_err = NULL;
     int ret;
+    uint64_t align;

     opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
     qemu_opts_absorb_qdict(opts, options, &local_err);
@@ -387,13 +418,61 @@ static int blkdebug_open(BlockDriverState *bs, QDict 
*options, int flags,
     bs->supported_zero_flags = (BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP) &
         bs->file->bs->supported_zero_flags;

-    /* Set request alignment */
+    /* Set alignment overrides */
     s->align = qemu_opt_get_size(opts, "align", 0);
     if (s->align && (s->align >= INT_MAX || !is_power_of_2(s->align))) {
         error_setg(errp, "Cannot meet constraints with align %" PRIu64,
                    s->align);
         goto fail_unref;
     }
+    align = MAX(s->align, bs->file->bs->bl.request_alignment);
+
+    s->max_transfer = qemu_opt_get_size(opts, "max-transfer", 0);
+    if (s->max_transfer &&
+        (s->max_transfer >= INT_MAX ||
+         !QEMU_IS_ALIGNED(s->max_transfer, align))) {
+        error_setg(errp, "Cannot meet constraints with max-transfer %" PRIu64,
+                   s->max_transfer);
+        goto fail_unref;
+    }
+
+    s->opt_write_zero = qemu_opt_get_size(opts, "opt-write-zero", 0);
+    if (s->opt_write_zero &&
+        (s->opt_write_zero >= INT_MAX ||
+         !QEMU_IS_ALIGNED(s->opt_write_zero, align))) {
+        error_setg(errp, "Cannot meet constraints with opt-write-zero %" 
PRIu64,
+                   s->opt_write_zero);
+        goto fail_unref;
+    }
+
+    s->max_write_zero = qemu_opt_get_size(opts, "max-write-zero", 0);
+    if (s->max_write_zero &&
+        (s->max_write_zero >= INT_MAX ||
+         !QEMU_IS_ALIGNED(s->max_write_zero,
+                          MAX(s->opt_write_zero, align)))) {
+        error_setg(errp, "Cannot meet constraints with max-write-zero %" 
PRIu64,
+                   s->max_write_zero);
+        goto fail_unref;
+    }
+
+    s->opt_discard = qemu_opt_get_size(opts, "opt-discard", 0);
+    if (s->opt_discard &&
+        (s->opt_discard >= INT_MAX ||
+         !QEMU_IS_ALIGNED(s->opt_discard, align))) {
+        error_setg(errp, "Cannot meet constraints with opt-discard %" PRIu64,
+                   s->opt_discard);
+        goto fail_unref;
+    }
+
+    s->max_discard = qemu_opt_get_size(opts, "max-discard", 0);
+    if (s->max_discard &&
+        (s->max_discard >= INT_MAX ||
+         !QEMU_IS_ALIGNED(s->max_discard,
+                          MAX(s->opt_discard, align)))) {
+        error_setg(errp, "Cannot meet constraints with max-discard %" PRIu64,
+                   s->max_discard);
+        goto fail_unref;
+    }

     ret = 0;
     goto out;
@@ -793,6 +872,21 @@ static void blkdebug_refresh_limits(BlockDriverState *bs, 
Error **errp)
     if (s->align) {
         bs->bl.request_alignment = s->align;
     }
+    if (s->max_transfer) {
+        bs->bl.max_transfer = s->max_transfer;
+    }
+    if (s->opt_write_zero) {
+        bs->bl.pwrite_zeroes_alignment = s->opt_write_zero;
+    }
+    if (s->max_write_zero) {
+        bs->bl.max_pwrite_zeroes = s->max_write_zero;
+    }
+    if (s->opt_discard) {
+        bs->bl.pdiscard_alignment = s->opt_discard;
+    }
+    if (s->max_discard) {
+        bs->bl.max_pdiscard = s->max_discard;
+    }
 }

 static int blkdebug_reopen_prepare(BDRVReopenState *reopen_state,
-- 
2.9.3