[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] crash in vhost-user-bridge on migration
From: |
Dr. David Alan Gilbert |
Subject: |
[Qemu-devel] crash in vhost-user-bridge on migration |
Date: |
Tue, 2 May 2017 20:16:30 +0100 |
User-agent: |
Mutt/1.8.0 (2017-02-23) |
Hi,
I've started playing with vhost-user-bridge and have it
basically up and going, but I've just tried migration and
I've got a reliable crash for it; I'm not that sure I've
got it set up right, so suggestions please:
This is with qemu head, on an f26 host running an f25-ish
guest.
Program received signal SIGSEGV, Segmentation fault.
0x000055c414112ce4 in vring_avail_idx (vq=0x55c41582fd68, vq=0x55c41582fd68)
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:940
940 vq->shadow_avail_idx = vq->vring.avail->idx;
(gdb) p vq
$1 = (VuVirtq *) 0x55c41582fd68
(gdb) p vq->vring
$2 = {num = 0, desc = 0x0, avail = 0x0, used = 0x0, log_guest_addr = 0, flags =
0}
(gdb) p vq->shadow_avail_idx
$3 = 0
#0 0x000055c414112ce4 in vring_avail_idx (vq=0x55c41582fd68, vq=0x55c41582fd68)
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:940
No locals.
#1 virtqueue_num_heads (idx=0, vq=0x55c41582fd68, dev=0x55c41582fc20)
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:960
num_heads = <optimized out>
#2 vu_queue_get_avail_bytes (dev=0x55c41582fc20, vq=0x55c41582fd68,
address@hidden,
address@hidden, address@hidden,
address@hidden) at
/home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:1034
idx = 0
total_bufs = 0
in_total = 0
out_total = 0
rc = <optimized out>
#3 0x000055c414112fbd in vu_queue_avail_bytes (dev=<optimized out>,
vq=<optimized out>, in_bytes=0, out_bytes=0)
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:1116
in_total = 0
out_total = 0
#4 0x000055c4141114da in vubr_backend_recv_cb (sock=<optimized out>,
ctx=0x55c41582fc20)
at /home/dgilbert/git/qemu/tests/vhost-user-bridge.c:276
vubr = 0x55c41582fc20
dev = 0x55c41582fc20
vq = 0x55c41582fd68
elem = 0x0
mhdr_sg = {{iov_base = 0x0, iov_len = 0} <repeats 740 times>, {iov_base
= 0x0, iov_len = 140512740079088}, {
.....}
mhdr = {hdr = {flags = 0 '\000', gso_type = 0 '\000', hdr_len = 0,
gso_size = 0, csum_start = 0,
csum_offset = 0}, num_buffers = 0}
mhdr_cnt = 0
hdrlen = 0
i = 0
hdr = {flags = 0 '\000', gso_type = 0 '\000', hdr_len = 0, gso_size =
0, csum_start = 0, csum_offset = 0}
__PRETTY_FUNCTION__ = "vubr_backend_recv_cb"
#5 0x000055c414110ad3 in dispatcher_wait (timeout=200000, dispr=0x55c4158300b8)
at /home/dgilbert/git/qemu/tests/vhost-user-bridge.c:154
e = 0x55c415830180
That's from the destination bridge; I'm running both on a single
host and that's happening when I just do a :
migrate_set_speed 1G
migrate tcp:localhost:8888
The destination qemu spits out:
qemu-system-x86_64: Failed to set msg fds.
qemu-system-x86_64: vhost VQ 0 ring restore failed: -1: Resource temporarily
unavailable (11)
qemu-system-x86_64: Failed to set msg fds.
qemu-system-x86_64: vhost VQ 1 ring restore failed: -1: Resource temporarily
unavailable (11)
but I'm not sure if that's before or after the seg of the bridge.
I've got:
a) One qemu that just has the -net socket / -net user setup as per the docs -
but I've got
two lots of sockets for either side
b) Two qemus for the guests, teh second with just the -incoming
c) The two vhost-user-bridge instances - the destination being pointed at the
second set of sockets.
My test is run by doing:
#!/bin/bash -x
SESS=vhost
tmux -L $SESS new-session -d
tmux -L $SESS set-option -g set-remain-on-exit on
# Start a router using the system qemu
tmux -L $SESS new-window -n router qemu-system-x86_64 -M none -nographic -net
socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 -net
socket,vlan=0,udp=localhost:4445,localaddr=localhost:5556 -net user,vlan=0
# Start source vhost bridge
tmux -L $SESS new-window -n srcvhostbr ./tests/vhost-user-bridge -u
/tmp/vubrsrc.sock
tmux -L $SESS new-window -n source "./x86_64-softmmu/qemu-system-x86_64
-enable-kvm -m 1G -smp 2 -object
memory-backend-file,id=mem,size=1G,mem-path=/dev/shm,share=on -numa
node,memdev=mem -mem-prealloc -chardev socket,id=char0,path=/tmp/vubrsrc.sock
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce -device
virtio-net-pci,netdev=mynet1 /home/vmimages/f25.qcow2 -net none"
# Start dest vhost bridge
tmux -L $SESS new-window -n destvhostbr ./tests/vhost-user-bridge -u
/tmp/vubrdst.sock -l 127.0.0.1:4445 -r 127.0.0.1:5556
tmux -L $SESS new-window -n dest "./x86_64-softmmu/qemu-system-x86_64
-enable-kvm -m 1G -smp 2 -object
memory-backend-file,id=mem,size=1G,mem-path=/dev/shm,share=on -numa
node,memdev=mem -mem-prealloc -chardev socket,id=char0,path=/tmp/vubrdst.sock
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce -device
virtio-net-pci,netdev=mynet1 /home/vmimages/f25.qcow2 -net none -incoming
tcp::8888"
(I've got a few added printf's so the lines might be off by a few).
Thanks,
Dave
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
- [Qemu-devel] crash in vhost-user-bridge on migration,
Dr. David Alan Gilbert <=