qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [Bug 822408] Re: Unable to access disk image on mipsel host


From: Artyom
Subject: [Qemu-devel] [Bug 822408] Re: Unable to access disk image on mipsel host
Date: Mon, 08 May 2017 16:04:44 -0000

Well, that's a blast from the past.
Still have the MIPS laptop in question (Lemote Yeeloong 8101b), got it running.

Built Qemu 0.14.1, the bug is replicated as before.
Built Qemu 2.9.0,  the bug is still replicated as before (but qemu is now about 
100x slower for some reason).

So it would appear that whatever the problem is, it never got solved in
the last 5 years.

Raw image (linux-0.2.img.bz2), can't quite test on WinXP any more since it's 
awfully slow.
Still gives the same kinds of errors:
hda: dma_intr: status=0x41 { DriveReady Error }
hda: dma_intr: error=0x04 { DriveStatusError }
hda: Failed opcode was: unknown

Built with ./configure --target-list=i386-softmmu


Triage-wise, both the laptop, the company and the CPU architecture lost the 
test of time and are at best collector's items these days, so unless the bug 
can be replicated on some modern MIPS system it's not worth bothering with.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/822408

Title:
  Unable to access disk image on mipsel host

Status in QEMU:
  Incomplete

Bug description:
  Something is wrong with hard disk images on MIPSel host.

  The host system is mips64el (Loongson cpu, Linux 2.6.39, eglibc 2.13)
  Tried Qemu 0.14.1 and 0.15.0-rc2, both compiled with GCC 4.6.0.

  First I was trying to install WinXP (i386-softmmu).
  Starting install, create partition, format (either quick and full), seems to 
complete, boom the error:

  "
  Setup was unable to format the partition.  The disk may be damaged.  Make 
sure the drive is switched on and properly connected to your computer.  If the 
disk is a SCSI disk, make sure your SCSI devices are properly terminated.  
Consult your computer manual or SCSI adapter documentation for more information.

  You must select a different partition for Windows XP.
  To continue, press ENTER.
  "

  This happens with both raw and qcow2 image format.
  Tried 10Gb image, tried 16Gb one - no difference.

  On a x86 host, that formatting makes the image (qcow2) grow to about
  81 Mb by the time it reaches 100% formatted (quick), but on mipsel it
  grows to 0.8Mb at the same time and the error appears.

  I tried the same installing of Windows in Qemu on x86 host and copied over 
the completed image.
  In that case it starts loading, but in the middle of the animation there is 
an error:

  "
  STOP: c0000221 Unknown Hard Error
  \Systemroot\System32\ntdll.dll
  "
  (or HAL.dll)

  So, i tried linux-0.2.img.bz2 from the Qemu site, and that fails too.
  Thus it's the minimal bug reproduction thing.

  During boot there are multiple errors like:
  "
  hda: dma_intr: status=0x41 { DriveReady Error }
  hda: dma_intr: error=0x04 { DriveStatusError }
  hda: Failed opcode was: unknown
  "

  It booted and kind of worked, there were weird glitches in every program.
  Unusable.

  Summarily, that suggest some error in hard disk emulation or back
  storage, specific either to MIPSel or non-x86 hosts.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/822408/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]