[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC PATCH V2 2/2] msi: Handle remappable format interr
From: |
Lan Tianyu |
Subject: |
Re: [Qemu-devel] [RFC PATCH V2 2/2] msi: Handle remappable format interrupt request |
Date: |
Mon, 22 May 2017 10:41:38 +0800 |
User-agent: |
Mozilla/5.0 (X11; Linux i686 on x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.3.0 |
Hi Anthony:
Thanks for your review.
On 2017年05月19日 19:57, Anthony PERARD wrote:
> On Thu, May 18, 2017 at 01:33:00AM -0400, Lan Tianyu wrote:
>> From: Chao Gao <address@hidden>
>>
>> According to VT-d spec Interrupt Remapping and Interrupt Posting ->
>> Interrupt Remapping -> Interrupt Request Formats On Intel 64
>> Platforms, fields of MSI data register have changed. This patch
>> avoids wrongly regarding a remappable format interrupt request as
>> an interrupt binded with an event channel.
>>
>> Signed-off-by: Chao Gao <address@hidden>
>> Signed-off-by: Lan Tianyu <address@hidden>
>> ---
>> hw/pci/msi.c | 5 +++--
>> hw/pci/msix.c | 4 +++-
>> hw/xen/xen_pt_msi.c | 2 +-
>> include/hw/xen/xen.h | 2 +-
>> xen-hvm-stub.c | 2 +-
>> xen-hvm.c | 7 ++++++-
>> 6 files changed, 15 insertions(+), 7 deletions(-)
>>
>> diff --git a/hw/pci/msi.c b/hw/pci/msi.c
>> index a87b227..199cb47 100644
>> --- a/hw/pci/msi.c
>> +++ b/hw/pci/msi.c
>> @@ -289,7 +289,7 @@ void msi_reset(PCIDevice *dev)
>> static bool msi_is_masked(const PCIDevice *dev, unsigned int vector)
>> {
>> uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
>> - uint32_t mask, data;
>> + uint32_t mask, data, addr_lo;
>> bool msi64bit = flags & PCI_MSI_FLAGS_64BIT;
>> assert(vector < PCI_MSI_VECTORS_MAX);
>>
>> @@ -298,7 +298,8 @@ static bool msi_is_masked(const PCIDevice *dev, unsigned
>> int vector)
>> }
>>
>> data = pci_get_word(dev->config + msi_data_off(dev, msi64bit));
>> - if (xen_is_pirq_msi(data)) {
>> + addr_lo = pci_get_long(dev->config + msi_address_lo_off(dev));
>> + if (xen_is_pirq_msi(data, addr_lo)) {
>> return false;
>> }
>>
>> diff --git a/hw/pci/msix.c b/hw/pci/msix.c
>> index bb54e8b..efe2982 100644
>> --- a/hw/pci/msix.c
>> +++ b/hw/pci/msix.c
>> @@ -82,9 +82,11 @@ static bool msix_vector_masked(PCIDevice *dev, unsigned
>> int vector, bool fmask)
>> {
>> unsigned offset = vector * PCI_MSIX_ENTRY_SIZE;
>> uint8_t *data = &dev->msix_table[offset + PCI_MSIX_ENTRY_DATA];
>> + uint8_t *addr_lo = &dev->msix_table[offset + PCI_MSIX_ENTRY_LOWER_ADDR];
>> /* MSIs on Xen can be remapped into pirqs. In those cases, masking
>> * and unmasking go through the PV evtchn path. */
>> - if (xen_enabled() && xen_is_pirq_msi(pci_get_long(data))) {
>> + if (xen_enabled() && xen_is_pirq_msi(pci_get_long(data),
>> + pci_get_long(addr_lo))) {
>> return false;
>> }
>> return fmask || dev->msix_table[offset + PCI_MSIX_ENTRY_VECTOR_CTRL] &
>> diff --git a/hw/xen/xen_pt_msi.c b/hw/xen/xen_pt_msi.c
>> index 5fab95e..45a9e9f 100644
>> --- a/hw/xen/xen_pt_msi.c
>> +++ b/hw/xen/xen_pt_msi.c
>> @@ -114,7 +114,7 @@ static int msi_msix_setup(XenPCIPassthroughState *s,
>>
>> assert((!is_msix && msix_entry == 0) || is_msix);
>>
>> - if (xen_is_pirq_msi(data)) {
>> + if (xen_is_pirq_msi(data, addr)) {
>> *ppirq = msi_ext_dest_id(addr >> 32) | msi_dest_id(addr);
>> if (!*ppirq) {
>> /* this probably identifies an misconfiguration of the guest,
>> diff --git a/include/hw/xen/xen.h b/include/hw/xen/xen.h
>> index 09c2ce5..af759bc 100644
>> --- a/include/hw/xen/xen.h
>> +++ b/include/hw/xen/xen.h
>> @@ -33,7 +33,7 @@ int xen_pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num);
>> void xen_piix3_set_irq(void *opaque, int irq_num, int level);
>> void xen_piix_pci_write_config_client(uint32_t address, uint32_t val, int
>> len);
>> void xen_hvm_inject_msi(uint64_t addr, uint32_t data);
>> -int xen_is_pirq_msi(uint32_t msi_data);
>> +int xen_is_pirq_msi(uint32_t msi_data, uint32_t msi_addr_lo);
>
> Maybe inverting the arguments would be better, so the arguments would be
> the address first, then the data, like I think it is often the case.
> What do you think?
That make sense. Will update.
>
>>
>> qemu_irq *xen_interrupt_controller_init(void);
>>
>> diff --git a/xen-hvm-stub.c b/xen-hvm-stub.c
>> index c500325..dae421c 100644
>> --- a/xen-hvm-stub.c
>> +++ b/xen-hvm-stub.c
>> @@ -31,7 +31,7 @@ void xen_hvm_inject_msi(uint64_t addr, uint32_t data)
>> {
>> }
>>
>> -int xen_is_pirq_msi(uint32_t msi_data)
>> +int xen_is_pirq_msi(uint32_t msi_data, uint32_t msi_addr_lo)
>> {
>> return 0;
>> }
>> diff --git a/xen-hvm.c b/xen-hvm.c
>> index 5043beb..db29121 100644
>> --- a/xen-hvm.c
>> +++ b/xen-hvm.c
>> @@ -146,8 +146,13 @@ void xen_piix_pci_write_config_client(uint32_t address,
>> uint32_t val, int len)
>> }
>> }
>>
>> -int xen_is_pirq_msi(uint32_t msi_data)
>> +int xen_is_pirq_msi(uint32_t msi_data, uint32_t msi_addr_lo)
>> {
>> + /* If msi address is configurate to remapping format, the msi will not
>> + * remapped into a pirq.
>
> What do you think of: "If the MSI address is configured in remappable
> format, the MSI will not be remapped into a pirq." ?
Will update.
>
>> + */
>> + if (msi_addr_lo & MSI_ADDR_IF_MASK)
>> + return 0;
>> /* If vector is 0, the msi is remapped into a pirq, passed as
>> * dest_id.
>> */
>
> Thanks,
>
--
Best regards
Tianyu Lan
Re: [Qemu-devel] [RFC PATCH V2 0/2] Qemu: Add Xen vIOMMU interrupt remapping function., no-reply, 2017/05/18