qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 1/5] s390x/css: catch section mismatch on load


From: Christian Borntraeger
Subject: [Qemu-devel] [PULL 1/5] s390x/css: catch section mismatch on load
Date: Thu, 8 Jun 2017 15:18:56 +0200

From: Halil Pasic <address@hidden>

Prior to the virtio-ccw-2.7 machine (and commit 2a79eb1a), our virtio
devices residing under the virtual-css bus do not have qdev_path based
migration stream identifiers (because their qdev_path is NULL). The ids
are instead generated when the device is registered as a composition of
the so called idstr, which takes the vmsd name as its value, and an
instance_id, which is which is calculated as a maximal instance_id
registered with the same idstr plus one, or zero (if none was registered
previously).

That means, under certain circumstances, one device might try, and even
succeed, to load the state of a different device. This can lead to
trouble.

Let us fail the migration if the above problem is detected during load.

How to reproduce the problem:
1) start qemu-system-s390x making sure you have the following devices
   defined on your command line:
     -device virtio-rng-ccw,id=rng1,devno=fe.0.0001
     -device virtio-rng-ccw,id=rng2,devno=fe.0.0002
2) detach the devices and reattach in reverse order using the monitor:
     (qemu) device_del rng1
     (qemu) device_del rng2
     (qemu) device_add virtio-rng-ccw,id=rng2,devno=fe.0.0002
     (qemu) device_add virtio-rng-ccw,id=rng1,devno=fe.0.0001
3) save the state of the vm into a temporary file and quit QEMU:
     (qemu) migrate "exec:gzip -c > /tmp/tmp_vmstate.gz"
     (qemu) q
4) use your command line from step 1 with
     -incoming "exec:gzip -c -d /tmp/tmp_vmstate.gz"
   appended to reproduce the problem (while trying to to load the saved vm)

CC: address@hidden
Signed-off-by: Halil Pasic <address@hidden>
Reviewed-by: Dong Jia Shi <address@hidden>
Reviewed-by: Cornelia Huck <address@hidden>
Message-Id: <address@hidden>
Signed-off-by: Christian Borntraeger <address@hidden>
---
 hw/s390x/css.c        | 14 ++++++++++++++
 hw/s390x/virtio-ccw.c |  6 +++++-
 2 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/hw/s390x/css.c b/hw/s390x/css.c
index 1e2f26b..cc76c53 100644
--- a/hw/s390x/css.c
+++ b/hw/s390x/css.c
@@ -15,6 +15,7 @@
 #include "hw/qdev.h"
 #include "qemu/error-report.h"
 #include "qemu/bitops.h"
+#include "qemu/error-report.h"
 #include "exec/address-spaces.h"
 #include "cpu.h"
 #include "hw/s390x/ioinst.h"
@@ -1800,13 +1801,26 @@ void subch_device_save(SubchDev *s, QEMUFile *f)
 int subch_device_load(SubchDev *s, QEMUFile *f)
 {
     SubchDev *old_s;
+    Error *err = NULL;
     uint16_t old_schid = s->schid;
+    uint16_t old_devno = s->devno;
     int i;
 
     s->cssid = qemu_get_byte(f);
     s->ssid = qemu_get_byte(f);
     s->schid = qemu_get_be16(f);
     s->devno = qemu_get_be16(f);
+    if (s->devno != old_devno) {
+        /* Only possible if machine < 2.7 (no css_dev_path) */
+
+        error_setg(&err, "%x != %x", old_devno,  s->devno);
+        error_append_hint(&err, "Devno mismatch, tried to load wrong section!"
+                          " Likely reason: some sequences of plug and unplug"
+                          " can break migration for machine versions prior to"
+                          " 2.7 (known design flaw).\n");
+        error_report_err(err);
+        return -EINVAL;
+    }
     /* Re-assign subch. */
     if (old_schid != s->schid) {
         old_s = channel_subsys.css[s->cssid]->sch_set[s->ssid]->sch[old_schid];
diff --git a/hw/s390x/virtio-ccw.c b/hw/s390x/virtio-ccw.c
index e6a6f74..90d37cb 100644
--- a/hw/s390x/virtio-ccw.c
+++ b/hw/s390x/virtio-ccw.c
@@ -1279,9 +1279,13 @@ static int virtio_ccw_load_config(DeviceState *d, 
QEMUFile *f)
     SubchDev *s = ccw_dev->sch;
     VirtIODevice *vdev = virtio_ccw_get_vdev(s);
     int len;
+    int ret;
 
     s->driver_data = dev;
-    subch_device_load(s, f);
+    ret = subch_device_load(s, f);
+    if (ret) {
+        return ret;
+    }
     /* Re-fill subch_id after loading the subchannel states.*/
     if (ck->refill_ids) {
         ck->refill_ids(ccw_dev);
-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]