qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v5 1/5] throttle: factor out duplicate code


From: Greg Kurz
Subject: Re: [Qemu-devel] [PATCH v5 1/5] throttle: factor out duplicate code
Date: Thu, 22 Jun 2017 18:23:53 +0200

On Thu, 22 Jun 2017 16:38:45 +0200
Markus Armbruster <address@hidden> wrote:

> Pradeep Jagadeesh <address@hidden> writes:
> 
> > This patch factor out the duplicate throttle code that was present in
> > block and fsdev devices.
> >
> > Signed-off-by: Pradeep Jagadeesh <address@hidden>
> > ---
> >  blockdev.c                      | 44 +-----------------------------------
> >  fsdev/qemu-fsdev-throttle.c     | 43 +----------------------------------
> >  fsdev/qemu-fsdev-throttle.h     |  1 +
> >  include/qemu/throttle-options.h |  4 ++++
> >  util/throttle.c                 | 50 
> > +++++++++++++++++++++++++++++++++++++++++
> >  5 files changed, 57 insertions(+), 85 deletions(-)
> >
> > diff --git a/blockdev.c b/blockdev.c
> > index 6472548..5db9e5c 100644
> > --- a/blockdev.c
> > +++ b/blockdev.c
> > @@ -386,49 +386,7 @@ static void extract_common_blockdev_options(QemuOpts 
> > *opts, int *bdrv_flags,
> >      }
> >  
> >      if (throttle_cfg) {
> > -        throttle_config_init(throttle_cfg);
> > -        throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
> > -            qemu_opt_get_number(opts, "throttling.bps-total", 0);
> > -        throttle_cfg->buckets[THROTTLE_BPS_READ].avg  =
> > -            qemu_opt_get_number(opts, "throttling.bps-read", 0);
> > -        throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
> > -            qemu_opt_get_number(opts, "throttling.bps-write", 0);
> > -        throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
> > -            qemu_opt_get_number(opts, "throttling.iops-total", 0);
> > -        throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
> > -            qemu_opt_get_number(opts, "throttling.iops-read", 0);
> > -        throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
> > -            qemu_opt_get_number(opts, "throttling.iops-write", 0);
> > -
> > -        throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
> > -            qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> > -        throttle_cfg->buckets[THROTTLE_BPS_READ].max  =
> > -            qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> > -        throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
> > -            qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> > -        throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
> > -            qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> > -        throttle_cfg->buckets[THROTTLE_OPS_READ].max =
> > -            qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> > -        throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
> > -            qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> > -
> > -        throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
> > -            qemu_opt_get_number(opts, "throttling.bps-total-max-length", 
> > 1);
> > -        throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length  =
> > -            qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> > -        throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
> > -            qemu_opt_get_number(opts, "throttling.bps-write-max-length", 
> > 1);
> > -        throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
> > -            qemu_opt_get_number(opts, "throttling.iops-total-max-length", 
> > 1);
> > -        throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
> > -            qemu_opt_get_number(opts, "throttling.iops-read-max-length", 
> > 1);
> > -        throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
> > -            qemu_opt_get_number(opts, "throttling.iops-write-max-length", 
> > 1);
> > -
> > -        throttle_cfg->op_size =
> > -            qemu_opt_get_number(opts, "throttling.iops-size", 0);
> > -
> > +        throttle_parse_options(throttle_cfg, opts);
> >          if (!throttle_is_valid(throttle_cfg, errp)) {
> >              return;
> >          }
> > diff --git a/fsdev/qemu-fsdev-throttle.c b/fsdev/qemu-fsdev-throttle.c
> > index 7ae4e86..da9c225 100644
> > --- a/fsdev/qemu-fsdev-throttle.c
> > +++ b/fsdev/qemu-fsdev-throttle.c
> > @@ -31,48 +31,7 @@ static void fsdev_throttle_write_timer_cb(void *opaque)
> >  
> >  void fsdev_throttle_parse_opts(QemuOpts *opts, FsThrottle *fst, Error 
> > **errp)
> >  {
> > -    throttle_config_init(&fst->cfg);
> > -    fst->cfg.buckets[THROTTLE_BPS_TOTAL].avg =
> > -        qemu_opt_get_number(opts, "throttling.bps-total", 0);
> > -    fst->cfg.buckets[THROTTLE_BPS_READ].avg  =
> > -        qemu_opt_get_number(opts, "throttling.bps-read", 0);
> > -    fst->cfg.buckets[THROTTLE_BPS_WRITE].avg =
> > -        qemu_opt_get_number(opts, "throttling.bps-write", 0);
> > -    fst->cfg.buckets[THROTTLE_OPS_TOTAL].avg =
> > -        qemu_opt_get_number(opts, "throttling.iops-total", 0);
> > -    fst->cfg.buckets[THROTTLE_OPS_READ].avg =
> > -        qemu_opt_get_number(opts, "throttling.iops-read", 0);
> > -    fst->cfg.buckets[THROTTLE_OPS_WRITE].avg =
> > -        qemu_opt_get_number(opts, "throttling.iops-write", 0);
> > -
> > -    fst->cfg.buckets[THROTTLE_BPS_TOTAL].max =
> > -        qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> > -    fst->cfg.buckets[THROTTLE_BPS_READ].max  =
> > -        qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> > -    fst->cfg.buckets[THROTTLE_BPS_WRITE].max =
> > -        qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> > -    fst->cfg.buckets[THROTTLE_OPS_TOTAL].max =
> > -        qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> > -    fst->cfg.buckets[THROTTLE_OPS_READ].max =
> > -        qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> > -    fst->cfg.buckets[THROTTLE_OPS_WRITE].max =
> > -        qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> > -
> > -    fst->cfg.buckets[THROTTLE_BPS_TOTAL].burst_length =
> > -        qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
> > -    fst->cfg.buckets[THROTTLE_BPS_READ].burst_length  =
> > -        qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> > -    fst->cfg.buckets[THROTTLE_BPS_WRITE].burst_length =
> > -        qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
> > -    fst->cfg.buckets[THROTTLE_OPS_TOTAL].burst_length =
> > -        qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
> > -    fst->cfg.buckets[THROTTLE_OPS_READ].burst_length =
> > -        qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
> > -    fst->cfg.buckets[THROTTLE_OPS_WRITE].burst_length =
> > -        qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
> > -    fst->cfg.op_size =
> > -        qemu_opt_get_number(opts, "throttling.iops-size", 0);
> > -
> > +    throttle_parse_options(&fst->cfg, opts);
> >      throttle_is_valid(&fst->cfg, errp);
> >  }
> >  
> > diff --git a/fsdev/qemu-fsdev-throttle.h b/fsdev/qemu-fsdev-throttle.h
> > index e418643..c493e83 100644
> > --- a/fsdev/qemu-fsdev-throttle.h
> > +++ b/fsdev/qemu-fsdev-throttle.h
> > @@ -20,6 +20,7 @@
> >  #include "qemu/coroutine.h"
> >  #include "qapi/error.h"
> >  #include "qemu/throttle.h"
> > +#include "qemu/throttle-options.h"  
> 
> Why?
> 

Yeah, looking at the previous hunk, I guess it should rather go to
fsdev/qemu-fsdev-throttle.c.

> >  
> >  typedef struct FsThrottle {
> >      ThrottleState ts;
> > diff --git a/include/qemu/throttle-options.h 
> > b/include/qemu/throttle-options.h
> > index 3133d1c..565553a 100644
> > --- a/include/qemu/throttle-options.h
> > +++ b/include/qemu/throttle-options.h
> > @@ -10,6 +10,8 @@
> >  #ifndef THROTTLE_OPTIONS_H
> >  #define THROTTLE_OPTIONS_H
> >  
> > +#include "qemu/throttle.h"
> > +  
> 
> Let's avoid this include: move the ThrottleConfig typedef to
> qemu/typedefs.h.
> 
> >  #define THROTTLE_OPTS \
> >            { \
> >              .name = "throttling.iops-total",\
> > @@ -89,4 +91,6 @@
> >              .help = "when limiting by iops max size of an I/O in bytes",\
> >          }
> >  
> > +void throttle_parse_options(ThrottleConfig *, QemuOpts *);
> > +
> >  #endif
> > diff --git a/util/throttle.c b/util/throttle.c
> > index 3570ed2..ebe9dd0 100644
> > --- a/util/throttle.c
> > +++ b/util/throttle.c
> > @@ -514,3 +514,53 @@ void throttle_account(ThrottleState *ts, bool 
> > is_write, uint64_t size)
> >      }
> >  }
> >  
> > +/* parse the throttle options
> > + *
> > + * @opts: qemu options
> > + * @throttle_cfg: throttle configuration
> > + */
> > +void throttle_parse_options(ThrottleConfig *throttle_cfg, QemuOpts *opts)
> > +{
> > +    throttle_config_init(throttle_cfg);
> > +    throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
> > +        qemu_opt_get_number(opts, "throttling.bps-total", 0);
> > +    throttle_cfg->buckets[THROTTLE_BPS_READ].avg  =
> > +        qemu_opt_get_number(opts, "throttling.bps-read", 0);
> > +    throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
> > +        qemu_opt_get_number(opts, "throttling.bps-write", 0);
> > +    throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
> > +        qemu_opt_get_number(opts, "throttling.iops-total", 0);
> > +    throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
> > +        qemu_opt_get_number(opts, "throttling.iops-read", 0);
> > +    throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
> > +        qemu_opt_get_number(opts, "throttling.iops-write", 0);
> > +
> > +    throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
> > +        qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> > +    throttle_cfg->buckets[THROTTLE_BPS_READ].max  =
> > +        qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> > +    throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
> > +        qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> > +    throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
> > +        qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> > +    throttle_cfg->buckets[THROTTLE_OPS_READ].max =
> > +        qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> > +    throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
> > +        qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> > +
> > +    throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
> > +        qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
> > +    throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length  =
> > +        qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> > +    throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
> > +        qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
> > +    throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
> > +        qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
> > +    throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
> > +        qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
> > +    throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
> > +        qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
> > +
> > +    throttle_cfg->op_size =
> > +        qemu_opt_get_number(opts, "throttling.iops-size", 0);
> > +}  
> 
> Looks good otherwise.

Attachment: pgpZqYPEJ1Jid.pgp
Description: OpenPGP digital signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]