Re: [Qemu-devel] [Qemu devel v5 PATCH 5/5] msf2: Add Emcraft's Smartfusion2 SOM kit.

[sundeep subbaraya]

Hi Alistair,

On Wed, May 31, 2017 at 4:02 AM, Alistair Francis <address@hidden>
wrote:

> On Sun, May 28, 2017 at 10:26 PM, sundeep subbaraya
> <address@hidden> wrote:
> > Hi Alistair,
> >
> > On Sat, May 27, 2017 at 5:30 AM, Alistair Francis <address@hidden>
> > wrote:
> >>
> >> On Tue, May 16, 2017 at 8:38 AM, Subbaraya Sundeep
> >> <address@hidden> wrote:
> >> > Emulated Emcraft's Smartfusion2 System On Module starter
> >> > kit.
> >> >
> >> > Signed-off-by: Subbaraya Sundeep <address@hidden>
> >> > ---
> >> >  hw/arm/Makefile.objs |  1 +
> >> >  hw/arm/msf2-som.c    | 89
> >> > ++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> >  2 files changed, 90 insertions(+)
> >> >  create mode 100644 hw/arm/msf2-som.c
> >> >
> >> > diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> >> > index c828061..4b02093 100644
> >> > --- a/hw/arm/Makefile.objs
> >> > +++ b/hw/arm/Makefile.objs
> >> > @@ -5,6 +5,7 @@ obj-y += omap_sx1.o palm.o realview.o spitz.o
> >> > stellaris.o
> >> >  obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
> >> >  obj-$(CONFIG_ACPI) += virt-acpi-build.o
> >> >  obj-y += netduino2.o
> >> > +obj-y += msf2-som.o
> >>
> >> This should be obj-$(CONFIG_MSF2).
> >
> >
> > Ok will change it.
> >>
> >>
> >> >  obj-y += sysbus-fdt.o
> >> >
> >> >  obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
> >> > diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c
> >> > new file mode 100644
> >> > index 0000000..cd2b759
> >> > --- /dev/null
> >> > +++ b/hw/arm/msf2-som.c
> >> > @@ -0,0 +1,89 @@
> >> > +/*
> >> > + * SmartFusion2 SOM starter kit(from Emcraft) emulation.
> >> > + *
> >> > + * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
> >> > + *
> >> > + * Permission is hereby granted, free of charge, to any person
> >> > obtaining a copy
> >> > + * of this software and associated documentation files (the
> >> > "Software"), to deal
> >> > + * in the Software without restriction, including without limitation
> >> > the rights
> >> > + * to use, copy, modify, merge, publish, distribute, sublicense,
> and/or
> >> > sell
> >> > + * copies of the Software, and to permit persons to whom the Software
> >> > is
> >> > + * furnished to do so, subject to the following conditions:
> >> > + *
> >> > + * The above copyright notice and this permission notice shall be
> >> > included in
> >> > + * all copies or substantial portions of the Software.
> >> > + *
> >> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> >> > EXPRESS OR
> >> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> >> > MERCHANTABILITY,
> >> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
> >> > SHALL
> >> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
> OR
> >> > OTHER
> >> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> >> > ARISING FROM,
> >> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> >> > DEALINGS IN
> >> > + * THE SOFTWARE.
> >> > + */
> >> > +
> >> > +#include "qemu/osdep.h"
> >> > +#include "qapi/error.h"
> >> > +#include "hw/boards.h"
> >> > +#include "hw/arm/msf2-soc.h"
> >> > +#include "hw/arm/arm.h"
> >> > +#include "exec/address-spaces.h"
> >> > +
> >> > +#define DDR_BASE_ADDRESS      0xA0000000
> >> > +#define DDR_SIZE              (64 * M_BYTE)
> >> > +
> >> > +static void emcraft_sf2_init(MachineState *machine)
> >> > +{
> >> > +    DeviceState *dev;
> >> > +    DeviceState *spi_flash;
> >> > +    MSF2State *soc;
> >> > +    DriveInfo *dinfo = drive_get_next(IF_MTD);
> >> > +    qemu_irq cs_line;
> >> > +    SSIBus *spi_bus;
> >> > +    MemoryRegion *sysmem = get_system_memory();
> >> > +    MemoryRegion *ddr = g_new(MemoryRegion, 1);
> >> > +
> >> > +    memory_region_init_ram(ddr, NULL, "ddr-ram", DDR_SIZE,
> >> > +                           &error_fatal);
> >> > +    vmstate_register_ram_global(ddr);
> >> > +    memory_region_add_subregion(sysmem, DDR_BASE_ADDRESS, ddr);
> >>
> >> The user can use -m to specify the amount of RAM to create in the
> >> machine. Unless this board only ever includes 64MB of RAM you should
> >> use that option (you will need to sanity check it though). If the
> >> board only ever has 64MB it might be worth printing a warning to the
> >> user if they specify an something. Although there might be a default
> >> if they don't use -m, which makes it hard to print out a warning
> >> message.
> >
> >
> > This -m confuses me. Why is it necessary for an embedded board? RAM chip
> > is fixed and not extendable. Whereas normal PC may have extra RAM slots.
> > If another board has more RAM then we would instantiate another machine
> for
> > it
> > with that RAM size. Please explain. Maybe I am thinking in wrong
> direction.
>
> I agree with you, it doesn't make sense for every board. For some
> embedded boards it does make sense (ZynqMP can have a customisable
> amount of memory) but for most it doesn't make too much sense.
>
> In saying that it is a commonly used QEMU option, if you can find a
> way to report a warning if the user tries to specify a custom amount
> of memory I think that would be beneficial as QEMU will just ignore
> their input. I have a feeling that the ram_size variable will be set
> even if the user doesn't specify anything, which we don't want to
> report a warning on.
>

Do we need to report and exit if user specifies custom amount of memory?

Thanks,
Sundeep

>
> Thanks,
> Alistair
>
> >
> > Thanks,
> > Sundeep
>